Tools & Equipments
-
MID-AMERICA Chassis jig 4 & 4 1/2" cars, phenolic - #MID413P
MID-AMERICA Chassis jig 4 & 4 1/2" cars, phenolic - #MID413P
-
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
Fit for S&K tire truer.
-
KV Upgrade kit for KV tire truer - diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV5
KV upgrade kit for tire truer with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining
-
MID AMERICA Cheap tire & gear wrench, 1 pc - #MID432
MID AMERICA Cheap tire & gear wrench - #MID432
-
-
KV 1/8" (3.15 mm) axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV2
KV 1/8" (3.15 mm) axle for tire truer - #KV2
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 1/8" (3.15 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV11
KV black 1/8" (3.15 mm) long axle for tire truer - #KV11
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 3/32" (2.36 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV10
KV black 3/32" (2.36 mm) long axle for tire truer - #KV10
For true 3/32" tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 2 mm long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV9
KV black 2 mm long axle for tire truer - #KV9
For true 2 mm tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
MS-SLOTPARTS Balancing axle, dia. 3 mm
MS-SLOTPARTS Balancing axle, dia. 3 mm
In stock
-
MS-SLOTPARTS Balancing axle, dia. 2 mm
MS-SLOTPARTS Balancing axle, dia. 2 mm
-
HUDY Allen wrench .050" (4/40) and guide nut tool 9.0 mm - #125090
Type: Allen Wrench - Inch + Nut Tool
Series: Ultimate Professional R/C Tools
Tip size: .050"
Tip length: 30mm
Nut size: 9.0mm
Special tool for Slot cars -
KOLHOZA REAR WHEEL CUTTER Ø22MM - KZA0101
Wheel well cutting tool - cuts rear wheel well at 22mm
-
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #213
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #213
-
MS-SLOTPARTS Balancing axle, dia. 2 mm with flat (special order)
MS-SLOTPARTS Balancing axle, dia. 2 mm with flat (special order)
-
KOLHOZA STAND FOR AXLE WITH GEARS - KZA020
Stand for axles with gears ready for quick replacement. Holds up to 10 axles with gears. Use for storage or to keep replacements ready for quick change
-
KOFORD SILVER (5%) SOLDER W/FLUX CORE- #M333
Silver solder with flux core. 5% silver for 82% higher shear strength compared to regular silver solder.
-
DUBICK Egineering Power supply with the ability to accurately adjust the amperage (0-12 A) and voltage (0-15 V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
DUBICK Egineering Power supply with the ability to accurately adjust the amperage (0-12 A) and voltage (0-15 V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
The range of voltage regulating from 0 to 15 Volts and amperage from 0 to 12 Amperes.
The adjustment accuracy is up to 0.01 both voltage and amperage.
Ability to work from 110 and 220 volts.
USB Charger.
Wires are attached.
Weight 850 Grams.
Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
-
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
-
KOFORD LOW TEMP SOLDER W/FLUX CORE - #M444
Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks
-
S&K 0- 17V, 12A Power Supply. 110v or 220v. Weight 340 gr./ 0.75 lb. Dimensions: 110 x 90 x 48 mm - #SK0108
New ultra small power supply!
PARAMETERS
- Type: DC
- Input voltage, V: 110 or 220
- Adjustable voltage, V: 0-17
- Weight, gr: 340
- Dimensions, mm: 110x90x48
- Displays voltage & current
-
JK Replacement 10-32 cutter for L20 - #L21
JK Replacement 10-32 cutter for L20 - #L21
-
MID AMERICA Guide flag threaded - fit all guides - imperial thread 0-80 - #MID416
MID AMERICA Guide flag threaded - fit all guides - imperial thread 0-80 - #MID416
-
EAGLE Track braid roller tool - #EDP105
EAGLE Track braid roller tool - #EDP105
