Tools & Equipments
-
HUDY Allen Wrench Replacement Tip .050" x 120 mm - #125040
Type: Allen Replacement Tip - Inch
Tip size: .050"
Tip length: 120mm -
KV TIRE TRUER with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV4
KV TIRE TRUER with
DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining. Plastic box for storage included!! (NeAn #170)
3/32" and 2 mm axles included black anodozed. Construction with two types of diamond files and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm). -
VOKI Diam. tool for slot on motor back side – 3,2mm – for scale setups - #041
VOKI Diam. tool for slot on motor back side – 3,2mm – for scale setups
This tool use when you need to make a groove in the setup. Rear axle are included. First, you put the axle from the set, then fits the diamond tool and start machining setup to the required size. In this 3 steps you gained fast & convinient groove!
-
HUDY Allen Wrench Replacement Tip .050" x 30 mm - #125011
Type: Allen Replacement Tip - Inch
Tip size: .050"
Tip length: 30mm -
DenVel Multitool Version 2. Magnetic field, rotor resistance
How to use
https://www.youtube.com/watch?v=yUHEiXvsRNw
-
DUBICK Tweezers stainless steel, non-magnetic - #DB715
DUBICK Tweezers stainless steel, non-magnetic - #DB715
Perfect for work with small parts!
-
TAMIYA ANGLED TWEEZERS - #TAM74003
Special order!
These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.
-
JK Precision guide nut wrench for JK#U61 nut - #L30
JK Precision guide nut wrench for JK#U61 nut - #L30
-
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
This gauge is used to accurately measure the timing of slot car motor armatures.
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
-
TWP EDM rear axle alignment tool - #TWP521
TWP EDM rear axle alignment tool - #TWP521
New Rear axle alignment with 9 height options. Cut to erosion with CNC wire. Extremely precise with 0.005 mm tolerance. For gears between 32 teeth up to 40 teeth with holes for 3/32 shafts. The 90 mm long shaft is not included.
-
KV Needle for tire truer - #KV8
KV Needle for tire truer - #KV8
-
DUBICK 0- 15V, 17A Power Supply. 110V or 220V. Weight 750 gr. Dimensions: 122 x 70 x 208 mm.
We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm. -
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
-
MS-SLOTPARTS Static balancer tool for balancing the hubs and gears of slot cars. Includes 3/32 " & 2 mm axles and storage box.
Static balancer tool for balancing the hubs and gears of slot cars.
Includes 3/32 " & 2 mm axles and storage box.
-
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
Perfect for #MID138B, #MID138R
-
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
Fit for S&K tire truer.
-
MID AMERICA Cheap tire & gear wrench - #MID432
MID AMERICA Cheap tire & gear wrench - #MID432
-
KV Upgrade kit for KV tire truer - diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV5
KV upgrade kit for tire truer with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining
-
KV 1/8" (3.15 mm) axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV2
KV 1/8" (3.15 mm) axle for tire truer - #KV2
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 1/8" (3.15 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV11
KV black 1/8" (3.15 mm) long axle for tire truer - #KV11
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV 3/32" (2.36 mm) axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV7
KV 3/32" (2.36 mm) axle for tire truer - #KV7
For true 3/32" tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 3/32" (2.36 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV10
KV black 3/32" (2.36 mm) long axle for tire truer - #KV10
For true 3/32" tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.