Tools & Equipments
-
KOLHOZA BODY CUTTING TOOL - KZA002
Professional tool for easy & smooth cutting of the body
-
KOLHOZA PIT BOX - KZA004
Pit Caddy for holding tires, traction, tools etc
-
JK Tire rack - #L32
JK Tire rack - #L32
Wheel stand is for holding any kind of tires.
-
TWP Pin body harpoon - #TWP-PIN
TWP Pin body harpoon - #TWP-PIN
Convenient tool for the body preparing!
-
KOLHOZA GUIDE TOOL - KZA001
Guide threading & Guide sanding tool in one
-
KOFORD ALIGNMENT BAR W/HOLES - #M148
Alignment bar with holes, provided with centering holes for both vertical and horizontal style brush hoods. The essential tool for motor assembly, used by motor builders world wide
-
KOLHOZA SLOT CAR BOX "SPORTSMAN WORKING PLACE" - #KZA005
Includes travel bag with wheels.
Width - 430 mm (17,3"); Height - 310 mm (12,6"); Depth - 195 mm (7,87")
All small boxes, as in the photo, are included. This sizes are good to the norms of hand luggage, so you can take the box to the cabin, which is very convenient for travels. There is no built-in lighting. All box have department for 1/32 and 1/24 models and for tools.
Cost of delivery are discussed individually
-
MID-AMERICA Guide nut socket driver (metric nuts) - #MID129M
MID-AMERICA Guide nut socket driver (metric nuts) - #MID129M
-
KOLHOZA DONUT MOUNTING TOOL- KZA003
Tool for mounting tire donuts onto the rim
Comes with axes 3/32" & 2 mm
-
WRIGHTWAY Body pin punch - #WW90
WRIGHTWAY Body pin punch - #WW90
Body Pin Punches are for making pin holes in bodies.
-
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
-
KOFORD Ø.471" (11.96 mm) bearing assembly tool (for Eurosport motor) - #M523-471
KOFORD Ø.471" (11.96 mm) bearing assembly tool (for Eurosport motor) - #M523-471
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOLHOZA TIRE TRUER STANDART - KZA006
Includes 3/32 " & 2 mm axles and reserve rubber transmission belt
-
MS-SLOTPARTS Gauge for cutting the braids
MS-SLOTPARTS Gauge for cutting the braids
Through the set dimension, cutting is always precisely at the same length. Unequal or cropped braids belong to the past.
-
KOLHOZA TIRE TRUER NEW - KZA0061
Updated configuration!
-
KOFORD Ø.476" (12.09 mm) bearing assembly tool (for Eurosport motor) - #M523-476
KOFORD Ø.476" (12.09 mm) bearing assembly tool (for Eurosport motor) - #M523-476
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.478" (12.14 mm) bearing assembly tool (for Eurosport motor) - #M523-478
KOFORD Ø.478" (12.14 mm) bearing assembly tool (for Eurosport motor) - #M523-478
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.479" (12.17 mm) bearing assembly tool (for Eurosport motor) - #M523-479
KOFORD Ø.479" (12.17 mm) bearing assembly tool (for Eurosport motor) - #M523-479
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.480" (12.19 mm) bearing assembly tool (for Eurosport motor) - #M523-480
KOFORD Ø.480" (12.19 mm) bearing assembly tool (for Eurosport motor) - #M523-480
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.481" (12.22 mm) bearing assembly tool (for Eurosport motor) - #M523-481
KOFORD Ø.481" (12.22 mm) bearing assembly tool (for Eurosport motor) - #M523-481
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.484" (12.29 mm) bearing assembly tool (for Eurosport motor) - #M523-484
KOFORD Ø.484" (12.29 mm) bearing assembly tool (for Eurosport motor) - #M523-484
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
-
DUBICK Tire truer
DUBICK Tire truer
New tire truer with on / off button, made with two types of needle trimming in diameter, three spacers 16 mm, 20 mm, 20.7 mm, a limb for setting the diameter as on a micrometer, a reduced size and weight. Comes with a storage bag.
-
SRP Pit caddy
SRP Pit caddy
Don't forget to choose the color!
- Dimensions: 180x130mm / 7x5 in.,
- runs off 9V battery,
- 2 spots for tire wrenches,
- 3 spots for oil/braid juice,
- small magnet for holding pins,
- slot for Lane Stickers,
- Color Options: Black, Blue, Green, Yellow, Red, Orange, Purple, Clear.
-
ZHB .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
.050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
The simplest & cheap allen wrench for the beginning racers!
-
JK Body Guide Cutting Tool - #L80
JK Body Guide Cutting Tool - #L80
Professional tool for easy & smooth cutting of the body
-
MID AMERICA Body mounting fixture for Gemini and JK Aeolos chassis - #MID456
MID AMERICA Body mounting fixture for Gemini and JK Aeolos chassis - #MID456
-
PARMA .050" (4/40) ALLEN WRENCH, W/OUT HANDLE - #558S
Standard allen wrench for wheel screws, etc.
-
JK Donut wizard mounting tool - #L19
JK Donut wizard mounting tool - #L19
Makes fitting of donuts easy.
Suitable for all 3/32" axle hubs / rims.
The wizard comes with 5 cones to suit most wheel sizes 8mm to 15mm
Manufactured from strong sturdy Nylon & Delrin with a hard steel 3/32" axleOld catalog #JK8075
-
ZHB Digital Calipers 150 mm (6"). Accuracy: +/- .02mm/.001inch. Plastic box and 2 pc battery.
Specs:
Range: 0-150mm
Accuracy: +/- .02mm/.001inch
Resolution: .01mm/0.0005inch
Repeatability: 0.01mm/0.0005inch
Max Measuring Speed: 1.5m/s, 60inch/s (FAST)
Operating Temp: 0~40Deg Celcius
Storage Temp: -10~60Deg Celcius
Power: 1.5v SR44 Battery -
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
Old catalog #JK8051
-
KOFORD .050" INSERT IN ALLEN WRENCH, straight, dia. 2 mm - #M163
Improved reduced diameter insert for the above wrench, also fits all standard handles
-
KOLHOZA SHIELDED BALLBEARING 3 x 7 x 3 mm FOR TIRE TRUERS KZA006, KZA0061 - KZA0066
Reserve shielded ballbearing 3x7 mm for TIRE TRUERS KZA006, KZA0061
-
Slotracingshop.com Tire durometer w/protective hard shell plastic case
Tire durometer w/protective hard shell plastic case
-
WRIGHTWAY Paste flux - #WW10
WRIGHTWAY Paste flux - #WW10
Paste Flux in plastic syringe
-
MID AMERICA Soldering paste flux, 15 g., tin - #MID111B
MID AMERICA Soldering paste flux, 15 g., tin - #MID111B
-
JK Precision guide nut wrench for JK#U61 nut - #L30
JK Precision guide nut wrench for JK#U61 nut - #L30
-
MAGNEHONE Hood tool - #MNH5000
MAGNEHONE Hood tool
Diamond coated hood tool, for brush hoods
-
R-GEO Cahoza gear driller - #615
R-GEO Cahoza gear driller - #615
Tool for decrese the total weight of the gear.
See the description on the following photo.
-
-
WRIGHT WAY Flux brush, 1 pc. - #WWFB
WRIGHT WAY Flux brush, 1 pc.
-
MID-AMERICA PRO billet tech block w/ 8 guide depths double sided - #MID417
MID-AMERICA PRO billet tech block w/ 8 guide depths double sided - #MID417
-
QBICK Tech block, full analogue of the Dubick engineering tech block
QBICK Tech block, full analogue of the Dubick engineering tech block
One side is finally polished to ideal plane, another side is ready for the soldering.
This tech block is a full analogue of the Dubick engineering tech block!
-
BP PRODUCTS Gear drilling tool for drilling 2 mm holes in 3/32" axle gears
BP PRODUCTS Gear drilling tool for drilling 2 mm holes in 3/32" axle gears
-
DenVel electonics Stand for magnets tests - #MT1
Stand for magnets tests. Indispensable in the selection of magnets.
Link to video review: https://www.youtube.com/watch?v=BKBSmt1xII0&fbclid=IwAR1v2R-puybfh6tBgDQ9Ikzc71XbZAT54pEDwZyqWieqYR6AtgYRkHFv_UE
-
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
-
WRIGHT WAY Flux brush, 4 pc. - #WWFB4
WRIGHT WAY Flux brush, 4 pc.
-
KOFORD Ø.485" (12.32 mm) bearing assembly tool (for Eurosport motor) - #M523-485
KOFORD Ø.485" (12.32 mm) bearing assembly tool (for Eurosport motor) - #M523-485
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.486" (12.34 mm) bearing assembly tool (for Eurosport motor) - #M523-486
KOFORD Ø.486" (12.34 mm) bearing assembly tool (for Eurosport motor) - #M523-486
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.487" (12.37 mm) bearing assembly tool (for Eurosport motor) - #M523-487
KOFORD Ø.487" (12.37 mm) bearing assembly tool (for Eurosport motor) - #M523-487
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.488" (12.39 mm) bearing assembly tool (for Eurosport motor) - #M523-488
KOFORD Ø.488" (12.39 mm) bearing assembly tool (for Eurosport motor) - #M523-488
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.489" (12.42 mm) bearing assembly tool (for Eurosport motor) - #M523-489
KOFORD Ø.489" (12.42 mm) bearing assembly tool (for Eurosport motor) - #M523-489
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.490" (12.45 mm) bearing assembly tool (for Eurosport motor) - #M523-490
KOFORD Ø.490" (12.45 mm) bearing assembly tool (for Eurosport motor) - #M523-490
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.491" (12.47 mm) bearing assembly tool (for Eurosport motor) - #M523-491
KOFORD Ø.491" (12.47 mm) bearing assembly tool (for Eurosport motor) - #M523-491
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.500" (12.7 mm) bearing assembly tool (for Eurosport motor) - #M523-500
KOFORD Ø.500" (12.7 mm) bearing assembly tool (for Eurosport motor) - #M523-500
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.501" (12.72 mm) bearing assembly tool (for Eurosport motor) - #M523-501
KOFORD Ø.501" (12.72 mm) bearing assembly tool (for Eurosport motor) - #M523-501
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
-
-
-
-
KOFORD Ø.498" (12.65 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-498
In stock
One of the most used sizes for ES32 and ES24!
-
KOFORD Ø.500" (12.7 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-500
In stock
One of the most used sizes for ES32 and ES24!
-
-
-
DenVel electonics Stand for magnets tests, w/external sensor, v.2 - #MT v2
Magnet tester #MT v2 - a device for measuring the magnetic field strength of magnets.
-
WRIGHT WAY Flux brush, 12 pc. - #WWFB12
WRIGHT WAY Flux brush, 12 pc.
-
KOLHOZA RUBBER TRANSMISSION BELT FOR TIRE TRUER KZA006 (61) 46.09MM DIA. - KZA0062
Reserve rubber transmission belt forTIRE TRUER KZA006 (KZA0061) & HUDY 46.09MM DIA.
-
-
DenVel Multitool v.2: measure magnets magnetic field & rotor resistance
DenVel Multitool v.2: measure magnets magnetic field & rotor resistance
-
KOLHOZA RUBBER TRANSMISSION BELT FOR TIRE TRUER KZA006 (61) 36.98MM DIA. - KZA0062 - KZA0063
Reserve rubber transmission belt for TIRE TRUER KZA006 (KZA0061) & HUDY 36.98MM DIA.
-
-
-
-
-
Neotron stend for dynamic balance all types of slot car armatures. Tolerance till 0,0001 gr.
Stend for dynamic balance all types of slot car armatures.
Tolerance till 0,0001 gr.
-
WORM JIM SLOT 1- 24 (36)V, 10A Power Supply. 110V or 230V. Weight 360 gr. - (Plastic box!) Size: 150 x 105 x 55 mm.
- Input: 110 - 230 V Output: 1-24(36)V / 10A
- Size: 150 x 105 x 55 mm
- Weight: 360 grams
Plastic box - Wireles charger
-
DOSLOT Winding checker
DOSLOT Winding checker
Dimensions: 5.315" x 2.362" (135 mm x 60 mm)
-
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
-
-
KOFORD BRUSH RADIUS TOOL, Ø5.2 mm - #M270
Brush radius tool for fast break in. The essential tool for maximum motor performance. Now hardened for long life and with improved knurl
-
KOLHOZA CAR BALANCER - KZA007
With this car balancer you can get your car balanced to perfection. With a front and two rear scales you can adjust your chassis front to back or right to left.
-
Chassis alignment tool for JK C26 (old C43)
Chassis alignment tool for JK C43
-
SONIC Replacement tire wrench tip .050", straight - #51-50TR
SONIC Replacement tire wrench tip .050", straight - #51-50TR
Fits most wrench handles. .050" tip fits Euro-Style wheels.
-
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
Precision Tolerance Allen Tip, Fits L10 and L15 handles
-
KOLHOZA AXLE FOR TIRE TRUERS KZA006 (61) & HUDY 3/32" (2.36 MM) - KZA0065
Reserve axle 3/32" (2.36 mm) for TIRE TRUER KZA006 (KZA0061) & HUDY
-
KOLHOZA SOLDER REGULATION 220V - KZA#008
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 220 volt.
-
MID AMERICA Replacement tire wrench tip .050", straight, dia. 2 mm - #426JK
MID AMERICA Replacement tire wrench tip .050", straight, dia. 2 mm
Fits for JK, Red Fox, Koford
-
MID-AMERICA Replacement tire wrench tip .050", straight, dia. 3 mm - #426
MID-AMERICA Replacement tire wrench tip .050", straight, dia. 3 mm
-
DUBICK Tweezers stainless steel, non-magnetic - #715
DUBICK Tweezers stainless steel, non-magnetic - #715
Perfect for work with small parts!
-
TAMIYA ANGLED TWEEZERS - #TAM74003
Special order!
These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.
-
KOLHOZA SOLDER REGULATION 110V - KZA#0081
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 110 volt
-
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
SPECIAL ORDER!
-
KV TIRE TRUER 3/32" and 2 mm axles included - #KV1
KV TIRE TRUER
3/32" and 2 mm axles included. 1/8” axle available separate. Plastic box for storage included!! (NeAn #170)
Black anodozed. Construction with two types of sandpaper and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm) -
KV TIRE TRUER with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV4
KV TIRE TRUER with
DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining. Plastic box for storage included!! (NeAn #170)
3/32" and 2 mm axles included black anodozed. Construction with two types of diamond files and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm). -
PARMA Phenolic heat resistant tech block recessed for guide & tires - #MID414
PARMA Phenolic heat resistant tech block recessed for guide & tires - #MID414
-
KOLHOZA REAR WHEEL CUTTER Ø20MM - KZA010
Wheel well cutting tool - cuts rear wheel well at 20mm
-
DUBICK TECH BLOCK WITH MAGNETS - #205
DUBICK TECH BLOCK WITH MAGNETS - #205
Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.
-
RALPH THORNE Flux Brush, 1 pc. - #RTRFB-1
RALPH THORNE Flux Brush, 1 pc.
1 disposable flux brush with adjustable length handles.
-
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
Old catalog #JK80421
-
KOLHOZA AXLE AND PINION CHECKER - KZA009
Deluxe Axle and pinion gear checker. Checks to make sure they are straight.
-
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
Perfect for #MID138B, #MID138R
-
SLOT FOX Flux brush, 1 pc. - #SF40110
SLOT FOX Flux brush, 1 pc. - #SF40110
-
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
-
KOFORD Flux brush - #M424
At last a flux brush which is the correct size for slot car racing and will hold up to the attack of acid flux.
-
RALPH THORNE Flux Brush, 20 pcs. - #RTRFB-20
RALPH THORNE Flux Brush, 1 pc.
This is a pack of 20 disposable flux brushes with adjustable length handles.
-
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #212
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #212
Viscose sponge for cleaning soldering iron tip
-
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #2121
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #2121
-
WRIGHTWAY VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 54 х 68 х 16 mm - #WWSPONG
High quality viscose sponge for cleaning soldering iron tip
-
HUDY Allen Wrench Replacement Tip .050" x 120 mm - #125040
Type: Allen Replacement Tip - Inch
Tip size: .050"
Tip length: 120mm -
KV Needle for tire truer - #KV8
KV Needle for tire truer - #KV8
-
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
Prepare your motor fast & precise.
-
HUDY Allen Wrench Replacement Tip .050" x 30 mm - #125011
Type: Allen Replacement Tip - Inch
Tip size: .050"
Tip length: 30mm -
JK 1/8" Precision ground magnetic static balancing axle shaft for L27 balancer - #L28
JK 1/8" Precision ground magnetic static balancing axle shaft for L27 balancer - #L28
-
JK 2mm Precision ground magnetic static balancing axle shaft for L27 balancer - #L29
JK 2mm Precision ground magnetic static balancing axle shaft for L27 balancer - #L29
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #2051
-
-
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
-
-
DUBICK 0- 15V, 17A Power Supply. 110V or 220V. Weight 750 gr. Dimensions: 122 x 70 x 208 mm.
We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm. -
MID-AMERICA Aluminum chassis jig 4 & 4 1/2" cars - #MID413
MID-AMERICA Aluminum chassis jig 4 & 4 1/2" cars - #MID413
-
MID-AMERICA Chassis jig 4 & 4 1/2" cars, phenolic - #MID413P
MID-AMERICA Chassis jig 4 & 4 1/2" cars, phenolic - #MID413P
-
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
Fit for S&K tire truer.
-
KV Upgrade kit for KV tire truer - diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV5
KV upgrade kit for tire truer with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining
-
MID AMERICA Cheap tire & gear wrench, 1 pc - #MID432
MID AMERICA Cheap tire & gear wrench - #MID432
-
-
KV 1/8" (3.15 mm) axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV2
KV 1/8" (3.15 mm) axle for tire truer - #KV2
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 1/8" (3.15 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV11
KV black 1/8" (3.15 mm) long axle for tire truer - #KV11
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 3/32" (2.36 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV10
KV black 3/32" (2.36 mm) long axle for tire truer - #KV10
For true 3/32" tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 2 mm long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV9
KV black 2 mm long axle for tire truer - #KV9
For true 2 mm tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
MS-SLOTPARTS Balancing axle, dia. 3 mm
MS-SLOTPARTS Balancing axle, dia. 3 mm
In stock
-
MS-SLOTPARTS Balancing axle, dia. 2 mm
MS-SLOTPARTS Balancing axle, dia. 2 mm
-
HUDY Allen wrench .050" (4/40) and guide nut tool 9.0 mm - #125090
Type: Allen Wrench - Inch + Nut Tool
Series: Ultimate Professional R/C Tools
Tip size: .050"
Tip length: 30mm
Nut size: 9.0mm
Special tool for Slot cars -
KOLHOZA REAR WHEEL CUTTER Ø22MM - KZA0101
Wheel well cutting tool - cuts rear wheel well at 22mm
-
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #213
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #213
-
MS-SLOTPARTS Balancing axle, dia. 2 mm with flat (special order)
MS-SLOTPARTS Balancing axle, dia. 2 mm with flat (special order)
-
KOLHOZA STAND FOR AXLE WITH GEARS - KZA020
Stand for axles with gears ready for quick replacement. Holds up to 10 axles with gears. Use for storage or to keep replacements ready for quick change
-
KOFORD SILVER (5%) SOLDER W/FLUX CORE- #M333
Silver solder with flux core. 5% silver for 82% higher shear strength compared to regular silver solder.
-
DUBICK Egineering Power supply with the ability to accurately adjust the amperage (0-12 A) and voltage (0-15 V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
DUBICK Egineering Power supply with the ability to accurately adjust the amperage (0-12 A) and voltage (0-15 V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
The range of voltage regulating from 0 to 15 Volts and amperage from 0 to 12 Amperes.
The adjustment accuracy is up to 0.01 both voltage and amperage.
Ability to work from 110 and 220 volts.
USB Charger.
Wires are attached.
Weight 850 Grams.
Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
-
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
-
KOFORD LOW TEMP SOLDER W/FLUX CORE - #M444
Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks
-
S&K 0- 17V, 12A Power Supply. 110v or 220v. Weight 340 gr./ 0.75 lb. Dimensions: 110 x 90 x 48 mm - #SK0108
New ultra small power supply!
PARAMETERS
- Type: DC
- Input voltage, V: 110 or 220
- Adjustable voltage, V: 0-17
- Weight, gr: 340
- Dimensions, mm: 110x90x48
- Displays voltage & current
-
JK Replacement 10-32 cutter for L20 - #L21
JK Replacement 10-32 cutter for L20 - #L21
-
MID AMERICA Guide flag threaded - fit all guides - imperial thread 0-80 - #MID416
MID AMERICA Guide flag threaded - fit all guides - imperial thread 0-80 - #MID416
-
EAGLE Track braid roller tool - #EDP105
EAGLE Track braid roller tool - #EDP105
-
MID AMERICA Braid roller tool - heavy duty for commercial tracks - #MID415
MID AMERICA Braid roller tool - heavy duty for commercial tracks
-
KOLHOZA Rear wheel cutter Ø24 mm - #KZA010-24
KOLHOZA Rear wheel cutter Ø24 mm - #KZA010-24
Wheel well cutting tool - cuts rear wheel well at 24 mm
-
KOLHOZA WHEEL STAND - KZA012
Wheel stand is for holding any kind of tires.
-
KOLHOZA Rear wheel cutter Ø26 mm - #KZA010-26
KOLHOZA Rear wheel cutter Ø26 mm - #KZA010-26
Wheel well cutting tool - cuts rear wheel well at 26 mm
-
VALIKO 0-15V, 12А, POWER SUPPLY 220V, ADJUSTABLE VOLTAGE/CURRENT
PARAMETERS
- Type: DC
- Input voltage, V: 220 (110)
- Adjustable voltage, V: 0-16
- Adjustable max current
- Weight, gr: 850
- Switch between voltage/current
- Displays current
- LED display
-
ZHB Metal drill, dia. 2,1 mm
ZHB Metal drill, dia. 2,1 mm
Made in USSR!
-
KOLHOZA ALUMINUM STAND FOR TIRE BOTTLES JK Ø23.5 mm (JK, Alpha), 80 х 140 mm - KZA013
An aluminum tire stand for tires with larger size bottles (usually 13/16 to 7/8" size). Fits 11 pairs of tires.
-
KOLHOZA ALUMINUM STAND / TIRE BOTTLES PARMA Ø27 mm (PSE, Alpha Large), 80 х 195 mm - KZA0131
Aluminum Tire Stand for tires with the smaller diameter tube. Usually .790 and smaller
-
KOLHOZA GUIDE SANDING TOOL - KZA011
Guide sanding tool
-
MG Digital clearance measuring tool
MG Digital clearance measuring tool
Convenient tool for tech inspection! Precision digital measures. Deepening for guide. It's possible to measure in mm or inches and adjustable zero point.
-
VITULA End mill bore 2 mm - #T1250
End mills are made from special high speed steel and they are sharpened of CNC grinder. End mills are mounted in duralumin grip. These tools are intended only for manual machining of soft material components, not for steel.
-
KOLHOZA STAND WITH PIT-BOX - KZA014
Stand for model with pit box is a very comfortable thing, when your're going to the track for practice
-
K&S Engineering Hand tap 0-80" - #KS435
K&S Engineering Hand tap 0-80" - #KS435
-
BSV TIRE TRUER
BSV TIRE TRUER
New tire truer with on / off button, made with two types of needle trimming in diameter, three spacers 16 mm, 20 mm, 20.7 mm, a limb for setting the diameter as on a micrometer, a reduced size and weight.
-
BSV Set for upgrade old version of the BSV tire truer to the current
BSV Set for upgrade old version of the BSV tire truer to the current
-
KOLHOZA STAND FOR NEW DONUTS - KZA015
On this stand your can place 17 pairs of new donuts. Used for storage in the orderliness
-
JK .050" Allen wrench w/guide nut tool 9 mm, blue - #L15
JK .050" Allen wrench w/guide nut tool 9 mm, blue - #L15
Wrench _ Tire & Gear Wrench w 9mm Guide Tool, 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Tip
-
GOPHERT 0- 16 volt 10 amp switching DC Power Supply. Adjustable voltage displays amps or voltage. 110v or 220v. Wires are attached. Total weight is 810 gr. Dimensions: 120 x 55 x 168mm.
PARAMETERS
- Type: DC
- Input voltage, V: 110 or 220
- Adjustable voltage, V: 0-16
- Total weight, gr: 810
- Dimensions, mm: 120x55x168
- Displays current
- LED display
-
ZHB TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
-
DUBICK diamond drum for tire truer BSV, 70 grit (grain diameter 0,315 mm) - #718
DUBICK Diamond drum for tire truer BSV, grain 0,3/0 mm
-
HUDY SLOT TIRE TRUER (1/8 + 3/32 Axles) - #103100
One of the besr tire truers. Very famous in America & in Europe
For more information you can visit the following link:
-
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
-
HUDY Rubber transmission belt for tire truer HUDY #103100 Ø30 mm & Ø40 mm. (2 pcs.)
HUDY Rubber transmission belt for tire truer HUDY #103100 Ø30 mm & Ø40 mm. (2 pcs.)
Strong rubber transmission belt
-
LUCKY BOBS TIRE FILE (w/big & small grain of files) - #1500
LUCKY BOBS TIRE FILE (w/big & small grain of files) - #1500
Used to get the right wheel width (big grain), as well as for edge rounding (small grain)
-
-
KOFORD Ø.539" (13.69 mm) bearing assembly tool (for motor) - #M188-539
KOFORD Ø.539" (13.69 mm) bearing assembly tool (for motor) - #M188-539
Prepare your motor fast & precise.
-
-
KOFORD Ø.541" (13.74 mm) bearing assembly tool (for motor) - #M188-541
KOFORD Ø.541" (13.74 mm) bearing assembly tool (for motor) - #M188-541
Prepare your motor fast & precise.
-
KOFORD Ø.542" (13.77 mm) bearing assembly tool (for motor) - #M188-542
KOFORD Ø.542" (13.77 mm) bearing assembly tool (for motor) - #M188-542
Prepare your motor fast & precise.
-
KOFORD Ø.560" (14.22 mm) bearing assembly tool (for motor) - #M188C-560
KOFORD Ø.560" (14.22 mm) bearing assembly tool (for motor) - #M188C-560
Koford Bearing installation tool made out of aluminum. Machined aluminum with 2mm shaft useful in gluing in magnets and installing can end bearings and oilites. Available in many sizes ranging from .468 to .590
Actual photo will be added soon :)
-
KOFORD Ø.569" (14.45 mm) bearing assembly tool (for motor) - #M188-569
KOFORD Ø.569" (14.45 mm) bearing assembly tool (for motor) - #M188-569
Prepare your motor fast & precise.
-
KOFORD Ø.571" (14.50 mm) bearing assembly tool (for motor) - #M188-571
KOFORD Ø.571" (14.50 mm) bearing assembly tool (for motor) - #M188-571
Prepare your motor fast & precise.
-
KOFORD Ø.580" (14.73 mm) bearing assembly tool (for motor) - #M188C-580
KOFORD Ø.580" (14.73 mm) bearing assembly tool (for motor) - #M188C-580
Koford Bearing installation tool made out of aluminum. Machined aluminum with 2mm shaft useful in gluing in magnets and installing can end bearings and oilites. Available in many sizes ranging from .468 to .590
-
ZHB DIAMOND MAGNET HONE Ø12.05 mm
ZHB DIAMOND MAGNET HONE Ø12.05 mm
-
ZHB DIAMOND MAGNET HONE Ø12.25 mm
ZHB DIAMOND MAGNET HONE Ø12.25 mm
-
ZHB DIAMOND MAGNET HONE Ø12.30 mm
ZHB DIAMOND MAGNET HONE Ø12.30 mm
-
KOLHOZA .050" (4-40) ALUMINUM ALLEN WRENCH W/GUIDE NUT TOOL 9 mm - KZA025
.050 wrench and guide nut tool
-
KOLHOZA DIAMOND DONUT DRILL 10MM DIA - KZA016
Diamond Donut drill 10 mm diameter - For opening up the hole on raw tire donuts.
-
ZHB DIAMOND MAGNET HONE Ø12.35 mm
ZHB DIAMOND MAGNET HONE Ø12.35 mm
-
WRIGHTWAY Diamond tire file - #WW52
WRIGHTWAY Diamond tire file - #WW52
-
KOFORD HIGH TEMPERATURE SOLDER W/FLUX CORE - #M618
High temperature silver solder. Melting point 598F. Ideal for soldering on pinions for G7 motors to prevent spinning.
-
CAHOZA HIGH TEMPERATURE SILVER SOLDER - #44
new excellent high temperature silver solder with perfect flux core (non corrosive flux), this solder is 94.8% tin and 5.2% silver, diameter 1mm, long 6 feet (1,8m
-
ZHB Desktop mat for work, dimensions 600 x 450 x 2.9 mm (A2 format)
- Size: 600 x 450 x 2.9 mm (A2).
- Thickness: 2.9 mm.
- Colour: green.
- The table mat is made from high durable PVC.
-
MID AMERICA Dual tip body detailing pen - #MID441
MID AMERICA Dual tip body detailing pen
-
JK Phillips Screwdriver for JK#M3 & JK#M6 Motors - #L9
JK Phillips Screwdriver for JK#M3 & JK#M6 Motors - #L9
Old catalog #JK8039
-
BSV .050” (4-40) Allen wrench w/guide nut tool
BSV .050” (4-40) Allen wrench w/guide nut tool
Allen wrench, from one side tip for .050" (4-40) rims screws, on other side guide nut tool for JK nuts or others
-
KOLHOZA AXLE CHECKER MACHINE - KZA017
Check to make sure your axles are perfectly straight
-
RALPH THORNE Long tire file grit 240 - #RTR-LTF
RALPH THORNE Long tire file grit 240 - #RTR-LTF
-
TWP Hex allen wrench .050" - #TWPCHA-002
TWP Hex allen wrench .050" - #TWPCHA-002
-
RALPH THORNE Long tire file dual grit (150/240) - #RTR-LTF
RALPH THORNE Long tire file dual grit (150/240) - #RTR-LTF
Long tires files feature a state of the art coating to get the job done done right. The medium file is 6" long by 1/2" wide.
-
HAKKO 503 SOLDERING IRON 60W 120V
The Hakko 503F-V12ED/P is a red handled 60 Watt solder iron with an ED6 screwdriver solder tip. This lightweight iron is economical and ideal for both students and hobbyists alike.
For more information you can visit the following link:
-
JK Wrench for 1.5mm allen motor screws - #L12
JK Wrench for 1.5mm allen motor screws - #L12
Old catalog #JK80422
-
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
-
TAMIYA DESIGN KNIFE with 30 additional blades- #TAM74020
Special order!
-
WELLER SOLDERING IRON 41W W/CERAMIC HEATER & STAND (Back order 2-4 weeks)
The most popular soldering iron among European sportsmens. Despite the power of 40 watts, it has excellent performance, reliable and lightweight. The heater is ceramic. Nickel plated tip. Clean only with viscose sponge.
It comes with 2 mm wide tip & stand.
Sorry, this item avialable only for backorder 2-4 week.
-
WELLER Сhisel tip - #UNGPL153
WELLER Сhisel tip - #UNGPL153
Tip Style ChiselTip Width O/D .2 in./5.08 mmTip Thickness/Height/ I/D .2 in./5.08 mmReach/Length .56 in./14.22 mm -
-
TAMIYA 30 ADDITIONAL BLADES FOR DESIGN KNIFE #TAM74020 - #TAM74074
Special order!
Additional blades for TAMIYA DESIGN KNIFE - #TAM74020
-
TRAXXAS Precision hobby knife w/5 additional blades - #3437
TRAXXAS Precision hobby knife w/5 additional blades - #3437
A quality hobby knife is an essential tool for any RC hobbyist's workbench. The Traxxas Precision Hobby Knife is built as tough as our models for years of use, featuring a high quality aluminum handle and carbon steel blades. From applying decals to trimming polycarbonate bodies, this knife will be among your most useful tools.
-
KOFORD .003" (0,07MM) AXLE SPACING TOOL 3/32 - #M572
003 Side play adjusting tool for 3/32 axles. Allows you to quickly get the perfect side play every time
-
KOFORD SIDE PLAY ADJUSTING TOOL (0.13 MM) - #M388
Side play adjusting tool for the rear axle of non ball bearing cars. Allows you to quickly get the perfect side play every time.
-
ZHB DIAMOND MAGNET HONE Ø12.82 mm
ZHB DIAMOND MAGNET HONE Ø12.82 mm
-
KOLHOZA CUTTING TUBING STAND - KZA018
With this tubing cutting jig you can make clean cuts of your tubing and cut multiple pieces to the exact same length
Video instruction for use:
https://www.facebook.com/video.php?v=548989248562024&set=vb.100003528612947&type=2&theater
-
KOLHOZA TABLE DRILL - KZA019
Created for shortening allen screws for fixing rims & gears.
Also, you can cut wire dia. untill 3 mm & square tubes made from: brass, copper, aluminum, stainless steel
-
ZHB DIAMOND MAGNET HONE Ø 0.540"
Нет в наличииZHB DIAMOND MAGNET HONE Ø12.85 mm
-
DUBICK DIAMOND MAGNET HONE Ø.538" - #755-538
ZHB DIAMOND MAGNET HONE Ø12.85 mm
-
DUBICK DIAMOND MAGNET HONE Ø.536" - #755-536
ZHB DIAMOND MAGNET HONE Ø12.85 mm
-
MID AMERICA DIAMOND CUTTER FOR GROOVING COMMUTATOR W/RING
MID AMERICA DIAMOND CUTTER FOR GROOVING COMMUTATOR W/RING
SPECIAL ORDER!
-
HUDY DIAMOND TOOL for 101100 - for not caped arms - #101081
Special order!
-
KOLHOZA MAGNETIC STATIC WHEEL BALANCER - KZA021
Magnetic Static Wheel Balancer - Includes 3/32 " & 2 mm axles and storage axis knob
-
ZHB SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.
SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.
Braid/Chassis Brush. Features super strong bristles and rugged handle - makes quick work of serious braid work or the removal of stubborn chassis crud.
Brush made of stainless steel for fluffing brushes in a guide
-
ZHB MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE
MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE
Very need thing on your work tables! This tray can eliminate lose & drop on the floor small parts, such as screws, pinions & others.
-
INORS TAP 4/40"
TAP 4/40"
-
ZHB DIAMOND MAGNET HONE ANY DIA., special order
DIAMOND MAGNET HONE ANY DIA.
Special order
-
KOFORD DIAMOND WHEEL FOR MAGNETS .500"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
KOFORD DIAMOND WHEEL FOR MAGNETS .538"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
Dubick Diamond brush radius tool dia. 188" (4.77 mm) - #768-188
Dubick Diamond brush radius tool dia. 188" (4.77 mm) - #768-188
-
Dubick Diamond brush radius tool dia. 193" (4.90 mm) - #768-193
Dubick Diamond brush radius tool dia. 193" (4.90 mm) - #768-193
-
Dubick Diamond brush radius tool dia. 197" (5.00 mm) - #768-197
Dubick Diamond brush radius tool dia. 197" (5.00 mm) - #768-197
-
Dubick Diamond brush radius tool dia. 202" (5.13 mm) - #768-202
Dubick Diamond brush radius tool dia. 202" (5.13 mm) - #768-202
-
Dubick Diamond brush radius tool dia. 207" (5.25 mm) - #768-207
Dubick Diamond brush radius tool dia. 207" (5.25 mm) - #768-207
-
Dubick Diamond brush radius tool dia. 211" (5.36 mm) - #768-211
Dubick Diamond brush radius tool dia. 211" (5.36 mm) - #768-211
-
CAHOZA Magnet gluing tool - dia. 531" - #68-531
CAHOZA Magnet gluing tool - dia. 531" - #68-531
stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for precise gluing of not honed Tornado magnets into Cahoza C-cans. Diameter .531" (13.48 mm).
-
CAHOZA Magnet gluing tool - dia. 538" - #68-538
CAHOZA Magnet gluing tool - dia. 538" - #68-538
stainless steel slug with smooth finish (CNC machined) with knurled aluminium nut. Used for regluing of Tornado magnets into Cahoza C-cans. Diameter .538" (13.66 mm).
-
VOKI Diam. tool for slot on motor back side – 3,2mm – for scale setups - #041
VOKI Diam. tool for slot on motor back side – 3,2mm – for scale setups
This tool use when you need to make a groove in the setup. Rear axle are included. First, you put the axle from the set, then fits the diamond tool and start machining setup to the required size. In this 3 steps you gained fast & convinient groove!
-
VITULA End mill bore 3/32" (2,36 mm) - #T1252
End mills are made from special high speed steel and they are sharpened of CNC grinder. End mills are mounted in duralumin grip. These tools are intended only for manual machining of soft material components, not for steel.
-
KOLHOZA AXLE 2 mm FOR MAGNETIC STATIC WHEEL BALANCER (KZA021) - KZA0211
Reserve axle 2mm for MAGNETIC STATIC WHEEL BALANCER (KZA021). It is possible to make the length until 52 mm
-
KOLHOZA AXLE 3/32" FOR MAGNETIC STATIC WHEEL BALANCER (KZA021) - KZA0212
Reserve axle 3/32" for MAGNETIC STATIC WHEEL BALANCER (KZA021). It is possible to make the length until 57 mm
-
KOLHOZA ARMATURE AXLE CHECKER MACHINE - KZA022
For testing the straightness of you axles and armatures
-
DUBICK SET OF STEEL PROBES FOR MEASUREMENT OF CLEARANCE, 20 pcs from 0,05 to 1 mm - #206
Thickness in set: - 0,05 mm/ 0,1 mm/ 0,15 mm/ 0,2 mm/ 0,25 mm/ 0,3 mm/ 0,35 mm/ 0,4 mm/ 0,45 mm/ 0,5 mm/ 0,55 mm/ 0,6 mm/ 0,65 mm/ 0,7 mm/ 0,75 mm/ 0,8 mm/ 0,85 mm/ 0,9 mm/ 0,95 mm/ 1 mm, respectively
The set is more than enough for the most detailed measurement of clearance!
-
LUCKY BOB GEAR PRESS - #LKY1000
GEAR PRESS (USED TO PRESS ON 7T THRU 11T GEARS)
-
JK Pinion gear puller T-Handle - #L17
JK Pinion gear puller T-Handle - #L17
Old catalog #JK8063
-
JK Heavy Duty Pinion Gear Puller - #L23
JK Heavy Duty Pinion Gear Puller - #L23
DELUXE GEAR PULLER has tighter pin and is harder than the previous version. Made from tool steel.
Old catalog #JK8062
-
KOLHOZA ELECTRONIC SPRING TENSION TOOL - KZA026
ELECTRONIC SPRING TENSION TOOL - For Measuring the tension of motor springs
-
KOFORD .050" GEAR AND WHEEL ALLEN WRENCH, black, anodized - #M162
Precision gear and wheel wrench with reduced diameter for clearance with plastic gears
-
ZHB SCISSORS MEDICAL STRAIGHT
SCISSORS MEDICAL STRAIGHT
Scissors for cutting models body and other things such as adhesive tape, lexan for strengthening, paper or cardboard. The best medical stanles steel!
-
PARMA ULTIMATE LEXAN SCISSORS - #10404
Utimate Body Scissors - Heavy duty 8" long scissors with 3.5" blades for cutting and trimming through thick RC bodies, wire, etc. No toolbox is complete without a set.
-
-
KOLHOZA .050" tire and gear wrench with 3/8" guide nut tool - #KZA036
KOLHOZA .050" tire and gear wrench with 3/8" guide nut tool - #KZA036
-
-
KOLHOZA .050" tire and gear wrench with 9 mm guide nut tool - #KZA037
KOLHOZA .050" tire and gear wrench with 9 mm guide nut tool - #KZA037
-
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø4.8 mm - #039
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø4.8 mm - #039
-
JConcepts Precision curved scissors, stainless steel blades, black handles - #2373
JConcepts Precision curved scissors, stainless steel blades, black handles
Cutting polycarbonate, soft plastic, soft rubber, fabric and thin paper products are what scissors are intended for.
-
MID AMERICA Double plated solder iron tip - #MID120
MID AMERICA Double plated solder iron tip - #MID120
replacement tip for the MID118 iron
-
WRIGHTWAY DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
-
HAKKO REPLACEMENT TIP FOR SOLDERING IRON WELLER 40W , width 3,5 mm- #HAKT18-D32/P
HAKKO REPLACEMENT TIP FOR SOLDERING IRON WELLER 40W , width 3,5 mm- #HAKT18-D32/P
-
HAKKO Replacement tip 13/64" (5.15 mm), FX-888/907-900M/913 - #18-S3/P
Replacement tip 13/64" (5.15 mm), FX-888/907-900M/913
Chisel tip - This tip is used with the following Hakko Soldering Stations and Systems: * Hakko FX-888 Soldering Station * Hakko 907 Soldering Iron * Hakko 900M Soldering Iron * Hakko 936 Soldering Station * Hakko 937 Soldering Station
-
WRIGHTWAY DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
15 pieces FITS MOST MOTO TOOLS
-
HAKKO Replacement tip for soldering station #936, 7/32" (5.55 mm) - #900L-T-S1/P
Replacement tip for soldering station #936, 7/32" (5.55 mm)
Replacement Hakko 900L Tip PN: 900L-T-S1 TIP,7/32in. D,900L/908/914
-
HAKKO Replacement tip T19-D65 w. 6.5 mm, for FX-601 soldering iron - #T19-D65/P
Replacement tip 6.5 mm, for FX-601 soldering iron
Chisel tip 6.5 x 18mm / Hakko T19 Series soldering iron tips, used with the Hakko FX601-01 temperature adjustable soldering iron.
-
ZHB SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE
SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE.
Very need thing to soldering iron, preventing burning out by them surrounding objects. Also viscose spoge could clean soldering iron tip from all debris
-
DUBICK Power supply leads 16Ga (section 1,31 mm²), "banana" clips from one side/ "alligator" clips from other
DUBICK Power supply leads 16Ga (section 1,31 mm²), "banana" clips from one side/ "alligator" clips from other
-
S&K Power supply leads 16Ga (section 1,31 mm²), "banana" clips from one side/ "alligator" clips from other, 0,8 m - #0109
S&K Power supply leads 16Ga (section 1,31 mm²) w/clips, 0,8 m - #0109
16 gauge wire with small 4 mm banana plugs and alligator clips, 0,8 m long - same as that comes with their power supply.
-
DUBICK Magnetaizer for slot car motors
DUBICK Magnetaizer for slot car motors
The magnetizer is designed to restore the operability of electric motors with stators on ferrite magnets by means of their pulsed magnetization in the inductor of the device. The magnetizing current in the inductor coil is created by the capacitor bank of the device, which is charged from the AC network with a voltage of 220 or 110 V with a frequency of 50 or 60 Hz.
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #203-23
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
WRIGHTWAY .050" ALLEN WRENCH W/GUIDE TOOL 9,5 mm, anodized
WRIGHTWAY .050" ALLEN WRENCH W/GUIDE TOOL 9,5 mm, anodized
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #203-27
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
PARAMETERS
- Dia. of wheels bottles, mm: 27 (PSE, Alpha Large)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 103x137
- Material: acrylic
-
-
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), blue - #L10
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), blue
The necessary thing for any racers!!
Hudy style aluminum handle with .050 allen tip and 3/8" nut driver guide tool
Old catalog #JK8042
-
HUDY LATHE FOR SLOT ARMATURES - HSG
Special order!
The best lathe for grooving commutators.
You can visit the following link to find more information about this item:
-
ZHB STAND SLOTLAB #TCS_Alpha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
STAND SLOTLAB #TCS_Alpha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
PARAMETERS
- Dia. of wheels bottles: 23,5 mm (.925") (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Quantity of bottles, pcs: 12
- Size: 88 x 17 mm (3.464" x .669")
- Material: acrylic
-
HUDY AXIAL SUPPORT for 101100 - #101906
Special order!
Option HUDY support for grooving of any length of armatures
-
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø5.2 mm - #039
Only for special order
-
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø5.4 mm - #039
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø5.4 mm - #039
-
DUBICK Diamond motor brush tool (for shunting) - #766
DUBICK Diamond motor brush tool (for shunting) - #766
-
DUBICK MG TOOL FOR PREPARING MOTOR BRUSHES W/DIAMOND WHEEL- #201
A tool that every modelist needs! With it's help quickly and accurately prepare motor brushes for any motors! Comes with a diamond wheel
Tool for motor brushes (horizontal or vertical). A more advanced design of the turtle. includes anodised knurled grip and diamond coated brush radius tool diameter 5,2 mm (.208")
-
PARMA FASKOLOR F-1 AIRBRUSH - #40260
PARMA FASKOLOR F-1 Dual Action Airbrush is designed with a medium tip which delivers a smooth spray and broad range of fine to heavy coverage. The dual action trigger is easy to use (push down for air, pull back for paint) and achieve great results for the beginner to seasoned body painter. The FASKOLOR Bottle Adaptor makes it easy to plug a paint bottle into the airbrush for quick coverage and ease of use (this requires 40-50lbs of air pressure. We suggest also purchasing our 1/4 Oz Color Cup #40278 for spraying or mixing small amounts of paint. The Color Cup also requires less air pressure for finer lines and faster clean up. This kit includes an Airbrush, Air Hose with 3/8" Brass Compressor Adaptor, Airbrush Holder, Bottle Adaptor and Mixing Bottle (not shown). All replacement parts are available. Made in USA
-
DUBICK Luxury carbon series tire bottle stand, for JK tubes 23.5 mm - #203-23-CARBON
DUBICK Luxury carbon series tire bottle stand, for JK tubes 23.5 mm
Box has 12 places for wheels tubes.
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
-
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
Tire & Gear Wrench w 3/8" Guide Tool, 4.5" long reach 2mm Shaft, 0.050" Precision Tolerance Tip HRC Hardened
-
HUDY Allen wrench .050" (4/40) and guide nut tool 3/8" (9.5 mm) - #125095
Type: Allen Wrench - Inch + Nut Tool
Series: Ultimate Professional R/C Tools
Tip size: .050"
Tip length: 30mm
Nut size: 3/8"
Special tool for Slot cars -
S&K F1 motor adjustment tool for offset crowns with 3/32" axle - #0103
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 3/32"
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
SONIC Double ended wrench - .050 and .078 tips - #51-5078
SONIC Double ended wrench - .050 and .078 tips - #51-5078
After machining, we finish your Sonic Pro-Wrench with high quality anodizing and laser marking. We then assemble your Sonic Pro-Wrench with the finest drill blank tips available. Our Double Ended Pro-Wrench has both a .050″ and a .078″ tip installed.
The .050 tip has a reduced shank diameter so it can be used with Euro-style wheels with ease
-
PARMA FASKOLOR F-1 PRO DUAL ACTION - #40260GF
Our FASKOLOR F-1 Dual Action Airbrush is designed with a medium tip which delivers a smooth spray and broad range of fine to heavy coverage. The dual action trigger is easy to use (push down for air, pull back for paint) and achieve great results for the beginner to seasoned body painter. The FASKOLOR Bottle Adaptor makes it easy to plug a paint bottle into the airbrush for quick coverage and ease of use (this requires 40-50lbs of air pressure. We suggest also purchasing our 1/4 Oz Color Cup #40278 for spraying or mixing small amounts of paint. The Color Cup also requires less air pressure for finer lines and faster clean up. This kit includes an Airbrush, Air Hose with 3/8" Brass Compressor Adaptor, Airbrush Holder, Bottle Adaptor and Mixing Bottle (not shown). All replacement parts are available. Made in USA
-
ZHB SET OF 2 AIRBRUSHES & PARTS TO THEM
SET OF 2 AIRBRUSHES & PARTS TO THEM
Use this airbrushes with high quality paints, you can paint your bodies at home & win beauty contest:)
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 3/32" - DB#200-3/32-2
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 2 mm - DB#200-2-2
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
Dubick Egineering Power supply with the ability to accurately adjust the amperage (0-12A) and voltage (0-15V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
Dubick Egineering Power supply with the ability to accurately adjust the amperage (0-12A) and voltage (0-15V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
The range of voltage regulating from 0 to 15 Volts and amperage from 0 to 12 Amperes.
The adjustment accuracy is up to 0.01 both voltage and amperage.
Ability to work from 110 and 220 volts.
USB Charger. Wires are attached.
Weight 850 Grams.
Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)
-
MTT TRACK (RACE) MANAGER
Track (race) manager. Works with software SPYTECH
-
SPYTECH RACE MANAGER
Recognized worldwide software with a track control unit.
-
KOLHOZA Slot car box "Sportsman working place" - #KZA042
KOLHOZA Slot car box "Sportsman working place"
Width - 455 (+/- 10-20 mm)
Height - 330 (+/- 10 - 20 mm)
Depth - 190 (+/- 10-20 mm)Height on the stands: 380 mm, on the wheels: 455 mm
-
KOLHOZA Slot car box "Sportsman working place" - #KZA043
KOLHOZA Slot car box "Sportsman working place"
Width - 420 (+/- 10-20 mm) - 16.53" (+/- .39"- .78")
Height - 330 (+/- 10 - 20 mm) - 12.99" (+/- .39"- .78")
Depth - 200 (+/- 10-20 mm) - 7.87" (+/- .39"- .78") -
DUBICK Luxury carbon series tire bottle stand, for big Parma tubes 27.5 mm - #203-27-CARBON
DUBICK Luxury carbon series tire bottle stand, for big Parma tubes 27.5 mm
Box has 12 places for wheels tubes.
-
WELLER Holder soldering iron - #T8000
WELLER Holder soldering iron - #T8000
- Easily attaches to work surface area
- Holds generic soldering tools
-
MainRef race manager. The most modern software for competition and training. It works with all modern Windows operating systems. Switching wires included. Fits to same connectors as SPYTECH (Fully interchangeable - compatible interface)
Was used on ISRA 2022 in Latvia.
More info will add later.
PLease, ask if you have any questions.