Tools & Equipments
-
ZHB Set of steel files, 3 pcs.
ZHB Set of steel files, 3 pcs.
-
WRIGHT WAY Flux brush, 1 pc. - #WWFB
WRIGHT WAY Flux brush, 1 pc.
-
RALPH THORNE Flux Brush, 1 pc. - #RTRFB-1
RALPH THORNE Flux Brush, 1 pc.
1 disposable flux brush with adjustable length handles.
-
ZHB .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
.050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
The simplest & cheap allen wrench for the beginning racers!
-
PARMA .050" (4/40) ALLEN WRENCH, W/OUT HANDLE - #558S
Standard allen wrench for wheel screws, etc.
-
SLOT FOX Flux brush, 1 pc. - #SF40110
SLOT FOX Flux brush, 1 pc. - #SF40110
-
KOFORD Flux brush - #M424
At last a flux brush which is the correct size for slot car racing and will hold up to the attack of acid flux.
-
MID AMERICA Dual tip body detailing pen - #MID441
MID AMERICA Dual tip body detailing pen
-
WRIGHT WAY Flux brush, 4 pc. - #WWFB4
WRIGHT WAY Flux brush, 4 pc.
-
KOFORD AXLE BEARING INSTALATION SPRING - M634
Coil spring for aligning axle bearings - Perfect rear axle bearing alignment - Slide over axle and slide through axle holes in chassis. Slide on bearings in place and square. Solder bearings from the inside of pillow blocks.
-
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #DB212
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #DB212
Viscose sponge for cleaning soldering iron tip
-
LUCKY BOBS TIRE FILE (w/big & small grain of files) - #1500
LUCKY BOBS TIRE FILE (w/big & small grain of files) - #1500
Used to get the right wheel width (big grain), as well as for edge rounding (small grain)
-
TAMIYA 30 ADDITIONAL BLADES FOR DESIGN KNIFE #TAM74020 - #TAM74074
Special order!
Additional blades for TAMIYA DESIGN KNIFE - #TAM74020
-
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
-
KOFORD .003" (0,07MM) AXLE SPACING TOOL 3/32 - #M572
003 Side play adjusting tool for 3/32 axles. Allows you to quickly get the perfect side play every time
-
KOFORD SIDE PLAY ADJUSTING TOOL (0.13 MM) - #M388
Side play adjusting tool for the rear axle of non ball bearing cars. Allows you to quickly get the perfect side play every time.
-
ZHB Metal drill, dia. 2,1 mm
ZHB Metal drill, dia. 2,1 mm
Made in USSR!
-
KOLHOZA RUBBER TRANSMISSION BELT FOR TIRE TRUER KZA006 (61) 36.98MM DIA. - KZA0062 - KZA0063
Reserve rubber transmission belt for TIRE TRUER KZA006 (KZA0061) & HUDY 36.98MM DIA.
-
KOLHOZA RUBBER TRANSMISSION BELT FOR TIRE TRUER KZA006 (61) 46.09MM DIA. - KZA0062
Reserve rubber transmission belt forTIRE TRUER KZA006 (KZA0061) & HUDY 46.09MM DIA.
-
KOLHOZA SHIELDED BALLBEARING 3 x 7 x 3 mm FOR TIRE TRUERS KZA006, KZA0061 - KZA0066
Reserve shielded ballbearing 3x7 mm for TIRE TRUERS KZA006, KZA0061
-
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
Fit for S&K tire truer.
-
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #DB2121
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #DB2121
-
WRIGHTWAY VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 54 х 68 х 16 mm - #WWSPONG
High quality viscose sponge for cleaning soldering iron tip