Motors, Setups & Motor Parts
-
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.
-
CAHOZA PHENOLIC INSULATORS, 1 pc. - #158
PHENOLIC INSULATORS
phenolic insulators, use on all aluminium endbells -
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
PROSLOT TORX 5 SCREW FOR ENDBELLS & BRUSH HOODS, 1 pc. - #PS717
1 self starting T5 Torx can and endbell screws
-
PROSLOT Magnet Clips for C-cans,1 pc. - #PS640
PROSLOT Magnet Clips for C-cans, 1 pc.
This is the clips for all 12-group (C-cans) motors.
-
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
-
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
-
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
-
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
-
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
-
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5
-
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
-
DUBICK 2 mm, .04" (1 mm) thick aluminium axle spacer, 1 pc. - #713-1
DUBICK 2 mm, .04" (1 mm) thick aluminium axle spacer, 1 pc. - #713-1
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
Spacers are precisely CNC turned from brass.
-
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
-
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
Old catalog #JK303065
-
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
-
KOFORD Teflon® spring insulation, 30 cm - #M267
KOFORD Teflon® spring insulation, 30 cm - #M267
Teflon® spring insulation, perfect fit on springs
-
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver
-
PARMA 16D ROTOR MOTOR ENDBELL SCREWS - #498F
16D Rotor Motor endbell Screws - set of 4
-
PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015
FX 2 X 5 Can & Endbell Replacement Oilites
-
ALPHA Teflon spring insulation, hank - #501
ALPHA Teflon spring insulation, hank - #501
The same bright red unmeltable spring insulation, but now with an even smaller outside diameter to allow that extra bit of room you need. It also slides on the spring more easily
-
PARMA 500 SERIES MOTOR SPRINGS - #500D
Replacement springs for all 16D motors