Motors, Setups & Motor Parts
-
CAHOZA G12 Motor type UL - #236-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA G12 Motor type O -- GOLD - #237-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type UL - bevelled - #236-ULB
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 beveled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled,
- weight 18.9 grammes
-
CAHOZA G12 Motor type U -- GOLD - #237-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type UL -- GOLD - #237-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA PROFI G12 Motor type O - #238-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza aluminium endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA PROFI G12 Motor type U - #238-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,9 grammes
-
CAHOZA G12 Motor type UL -- BLUEPRINTED- #237-ULB
Cahoza C-can motor, assembled using:
- Cahoza UL C-can #252,
- Cahoza Tornado 5 beveled magnets,
- Cahoza #263 plastic endbell with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.9 grammes
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A
PARAMETERS
- 16 segment magnets – bevelled 7°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
PROSLOT X-7 B PRO motor brushes, 50 prs. - #PS-X7B
PROSLOT X-7 B PRO motor brushes, 1 pr. - #PS-X7B
1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
KOFORD ES SETUP TOOL, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-ES-250
ES SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
CAHOZA PROFI G12 Motor type O - bevelled - #238-OB
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 beveled magnets,
- Cahoza aluminium endbell #146 with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.8 grammes
-
CAHOZA PROFI G12 Motor type UL - #238-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,8 grammes
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A
PARAMETERS
- Magnets quantity: 20 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103
PARAMETERS
- Magnets quantity: 24 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A
PARAMETERS
- 24 segmented magnets – bevelled 15°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B
PARAMETERS
- 28 segmented magnets – bevelled 7°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-250
ES SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300
ES SETUP 10 MAGNETS
ISRA 2014 World's champion in class Eurosport 1/32
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .300" (7.62 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
ZHB F 1/32 TOOL MOTOR
Magnet height 9,6mm (.376"), length 6.5 мм (.255"), outside diameter of magnets 14,75 mm (.580"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, BigFoot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation , Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)