Motors, Setups & Motor Parts
-
MID AMERICA Condor motor 16D size - #MID603
MID AMERICA Condor motor 16D size - #MID603
16D can with a nice fast arm.
Slightly faster than a S16D arm
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004
FX 16D/S16D Motor Setup
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
MID AMERICA Phoenix motor - #MID602
MID AMERICA Phoenix motor
A Hawk size motor with group 12 speed.
-
CAHOZA TAPPING SCREWS, for T5 driver, 24 pc. - #273
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 24 pcs. - #M256
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws. Easy open box of 24.
-
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
-
MID AMERICA Enforcer 60,000 rpm motor - #MID609
MID AMERICA Enforcer 60,000 rpm motor - #MID609
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
Old catalog #JK30307BB
-
B52 70K ball bearing motor - #B52-70KBB
B52 70K ball bearing motor - #B52-70KBB
-
B52 50K ball bearing motor - #B5250KBB
B52 50K ball bearing motor - #B5250KBB
50,000 RPM ball bearing motor
-
CAHOZA VERTICAL ENDBELL HARDWARE, 1 set - #170
NEW GOLD PLATED VERTICAL HARDWARE
NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm) -
CAHOZA HORIZONTAL ENDBELL HARDWARE, 1 set - #171
NEW GOLD PLATED HORIZONTAL HARDWARE
NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm -
JK Hawk 6 Motor, *** Balanced *** - #M6
JK Hawk 6 Motor, *** Balanced *** - #M6
Old catalog #JK30306
-
JK Hawk 11 extreme performance drag motor - #M11
Hawk 11 Precision Balanced Extreme Performance Motor, FK Sized, recommended for drag use only.
-
CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268
NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise -
B52 C-Can Combo magnets 0.167" thick, 0.458" long, type 1 (one side is flat one side is bevelled), pair
B52 C-Can magnets, type 1, pair
-
B52 C-Can Flat magnets 0.167" thick, 0.458" long, type 2 (both side is flat), pair
B52 C-Can magnets, type 2, pair
-
B52 C-Can Bevelled magnets 0.167" thick, 0.458" long, type 3 (both side is bevelled), pair
B52 C-Can magnets, type 3, pair
-
PROSLOT Euro MK1 Motor - 47.000+ rpm - #PS-4002
PROSLOT Euro MK1 Motor - 47.000+ rpm
160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing
-
PROSLOT Euro MK1 Motor - 26.000+ rpm - #PS-4000
PROSLOT Euro MK1 Motor - 26.000+ rpm
155/gm-cm, 280mA, standard with 45 degree springs. Designed for 1/32 and 1/24 ScaleHome, Club and Commercial Racing. CW or CCW rotation
-
PROSLOT Euro MK1 Motor - 37.000+ rpm - #PS-4001
PROSLOT Euro MK1 Motor - 37.000+ rpm
160/gm-cm, 300mA, standard with 60 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing. CW or CCW rotation