Motors, Setups & Motor Parts
-
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.
-
CAHOZA C-Can G12 motor - U - bevelled - #231B
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,1 grammes.
-
CAHOZA C-Can G12 motor - UL - #232
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19 grammes.
-
CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB
Cahoza C-can setup, assembled using:
- Cahoza C-can #252,
- Cahoza Tornado 5 bevelled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Cahoza screws,
- for .518" armatures, Koford ones are recommended,
- professionaly assembled,
- weight 10.8 grammes
-
CAHOZA C-Can G12 motor - UL - bevelled - #232B
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18 grammes.
-
VALIKO ARMATURE S-arm (ceramic, slotted blue), WINDINGS 19/24-, DIA. 0.485", STACK 0.300", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: S-arm
- Wingings: 19/24-
- Dia.: 0.485"
- Stack: 0.300"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
VALIKO CUSTOM EUROSPORT ARMATURE TYPE S-arm (ceramic slotted blue). All parameters under special order
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Type: S-arm
- Wingings: various
- Dia.: 0.465"...0.472" for F32 arms
- Dia.: 0.478"...0.486" for other ES arms
- Stack: 0.236"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
VALIKO ARMATURE S-arm (slot ceramic, blue), WINDINGS 45/29, DIA. 0.460", STACK 0.240", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: C-arm
- Wingings: 45/29
- Dia.: 0.460"
- Stack: 0.240"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
PK Eurosport armature PK, windings 19/25, dia. .485", stack .300", 25 degree
PK Eurosport armature
PARAMETERS:
- Wingings: 19/25
- Dia.: 0.485"
- Stack: 0.300"
- 325 degree
-
PK Eurosport armature PK, windings 30/50, dia. .465", stack .230", .600" long, 26 degree
PK F32 Eurosport armature
Fit for Cahoza, VOKI, ZHB setups.
-
PK Eurosport armature PK, windings 20/25, dia. .485", stack .300", 25 degree
PK Eurosport armature
PARAMETERS:
- Wingings: 20/25
- Dia.: 0.485"
- Stack: 0.300"
- 325 degree
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/30
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 28
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/28
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 20
-
KOFORD ARMATURE M199SAW CUSTOM EURO ARMS, - M199SAW Custom Euro arms
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Wingings: various
- Dia.: 0.459"...0.490"
- Stack: 0.235"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
CAHOZA G12 Motor type O - #235-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U - #235-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type O - #236-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U - #236-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
PROSLOT Velociraptor VR Open “NEO” motor - #PS-4025
PROSLOT Velociraptor VR Open “NEO” motor
This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter custom hand wound all-out Topgun style armature featuring our EDM commutator, wound on our race proven Intruder blank and our copper hardware on the endbell. Standard wind 18/24.5 and double ball bearings. Also available in 25/25, 15/24, 14/24