Motors, Setups & Motor Parts

• 

  KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644

  Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.

  43.32 $

• 

  PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016

  HAWK REPLACEMENT ARMATURE W/MARKED RUS

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  44.50 $

• 

  KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40

  G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.

  51.60 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  0.30 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  1.20 $

• 

  KOFORD ENBELL FOR SETUP KOFORD M652 UNDER ARMATURE W/RING - #M287L

  ENBELL FOR SETUP KOFORD #M652 UNDER ARMATURE W/RING - #M287L

  24.98 $

• 

  CAHOZA Setup kit - G27 Light .630" - #82

  CAHOZA Setup kit - G27 Light .630" - #82

  This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159

  80.00 $

• 

  MOTOR HORKY (under order), assembly

  Motors supplied under order. Delivery time from 1 month to 1 year. Also, price can change depending on the terms of delivery.

  450.00 $

• 

  CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A

  PARAMETERS

  • Magnets quantity: 20 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  210.53 $

• 

  CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103

  PARAMETERS

  • Magnets quantity: 24 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  221.05 $

• 

  CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A

  PARAMETERS

  • 24 segmented magnets – bevelled 15°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  231.58 $

• 

  CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B

  PARAMETERS

  • 28 segmented magnets – bevelled 7°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  242.11 $

• 

  DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034

  DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034

  0.55 $

• 

  DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5

  DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5

  0.30 $

• 

  DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6

  DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6

  0.30 $

• 

  DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5

  DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5

  0.30 $

• 

  DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7

  DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7

  0.30 $

• 

  KOFORD Teflon® spring insulation, 30 cm - #M267

  KOFORD Teflon® spring insulation, 30 cm - #M267

  Teflon® spring insulation, perfect fit on springs

  0.79 $

• 

  ALPHA Teflon spring insulation, hank - #501

  ALPHA Teflon spring insulation, hank - #501

  The same bright red unmeltable spring insulation, but now with an even smaller outside diameter to allow that extra bit of room you need. It also slides on the spring more easily

  0.95 $

• 

  DUBICK Set #1 of 2 mm inside diameter aluminium tubes ( 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")) - #DB712

  DUBICK Set of 2 mm inside diameter aluminium tubes - #DB712

  In set 1 pc of each size: 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")

  4.00 $

• 

  PARMA 16D Armature spacers - #500G

  PARMA 16D Armature spacers - #500G

  Replacement armature bushings for all 16D motors, 6 pieces.

  1.25 $

• 

  PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724

  PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724

   Armature Spacer Kit - Includes 2 phenolic and 8 brass motor spacers

  3.50 $