Motors, Setups & Motor Parts
-
CAHOZA PROFI G12 Motor type U - #238-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,9 grammes
-
CAHOZA PROFI G12 Motor type UL - #238-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,8 grammes
-
CAHOZA ALUMINUM SPRING CUPS (C-CANS), pair - #270
ALUMINIUM SPRING CUPS diameter for springs is 3,55mm (.180"), length is 2mm, springs are perfectly fastened and don't loose at all
-
PROSLOT SpeedFX matched magnets for D-cans (16D) - #PS2016
SPEEDFX MATCHED MAGNETS FOR D-CANS (16D) (1 pr.)
-
KAMEN DEMON 16D MAGNETS - #CMNK550
Magnets for D-Cans
-
PARMA Super 16D Motor Replacement Endbell - #502E
Replacement Endbell for #502 Super 16D Motor. Includes hardware and springs.
-
PARMA ENDBELL HARDWARE - #500B
16D Motor Endbell Hardware set
-
PROSLOT ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods - #2009
SET OF ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods
-
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
-
KAMEN DEMON 16D MAGNETS - #CMNK550
Magnets for D-Cans
-
PROSLOT TORX 5 SCREW FOR ENDBELLS & BRUSH HOODS, 1 pc. - #PS717
1 self starting T5 Torx can and endbell screws
-
PROSLOT S16D BALANCED ARMATURE (commutator trued) - #PS 2007
Basic armature for PROSLOT SPEED FX motor.
-
PROSLOT S16D ARMATURE, BALANCED, DIA. .513" - #PS 700
Special order!
Write to us to select the angle of the armature!
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 38 DEGREE - #PS-700C-38
Super 16 C Arm .513, 38 degrees, balanced
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 42 DEGREE - #PS-700C-42
Super 16 C Arm .513, 42 degrees, balanced
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 45DEGREE - #PS-700C-45
Special order!
Super 16 C Arm .513, 45degrees, balanced
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 38 DEGREE - #PS-700C-KS38
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 45 DEGREE - #PS-700C-KS45
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PARMA 16D ROTOR MOTOR ENDBELL SCREWS - #498F
16D Rotor Motor endbell Screws - set of 4
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "HK" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD SELF TAP MOTOR SCREWS, 4 pcs. - #M466-4
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD SELF TAP MOTOR SCREWS, 24 pcs. - #M466
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench. 24 psc.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644
Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules