Motors, Setups & Motor Parts
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 38 DEGREE - #PS-700C-KS38
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 45 DEGREE - #PS-700C-KS45
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PARMA 16D ROTOR MOTOR ENDBELL SCREWS - #498F
16D Rotor Motor endbell Screws - set of 4
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "HK" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD SELF TAP MOTOR SCREWS, 4 pcs. - #M466-4
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD SELF TAP MOTOR SCREWS, 24 pcs. - #M466
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench. 24 psc.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644
Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40
G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
KOFORD ENBELL FOR SETUP KOFORD M652 UNDER ARMATURE W/RING - #M287L
ENBELL FOR SETUP KOFORD #M652 UNDER ARMATURE W/RING - #M287L
-
CAHOZA Setup kit - G27 Light .630" - #82
CAHOZA Setup kit - G27 Light .630" - #82
This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159
-
MOTOR HORKY (under order), assembly
Motors supplied under order. Delivery time from 1 month to 1 year. Also, price can change depending on the terms of delivery.
-
CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A
PARAMETERS
- Magnets quantity: 20 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103
PARAMETERS
- Magnets quantity: 24 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A
PARAMETERS
- 24 segmented magnets – bevelled 15°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B
PARAMETERS
- 28 segmented magnets – bevelled 7°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
DUBICK Armature bronze spacers .181" (4.6 mm) thick, 2 pcs. - #4034
DUBICK Armature bronze spacers .181" (4.6 mm) thick, 2 pcs. - #4034
-
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #712-5.5
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #712-5.5
-
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #712-6
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #712-6
-
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #712-6.5
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #712-6.5
-
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #712-7
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #712-7
-
KOFORD Teflon® spring insulation, 30 cm - #M267
KOFORD Teflon® spring insulation, 30 cm - #M267
Teflon® spring insulation, perfect fit on springs
