Motors, Setups & Motor Parts

• 

  MID AMERICA Mockingbird motor - #MID604

  MID AMERICA Mockingbird motor

  16.95 $

• 

  MID-AMERICA DIAMOND HEAD SET UP KIT W/ BUSHINGS & MAGNETS - #MAR630

  Diamond Head C can set up Kit w/ Bushings C Can Set Up Very High Quality Set up kit with Magnets and brush springs

  67.99 $

• 

  MID AMERICA Phoenix motor - #MID602

  MID AMERICA Phoenix motor

  A Hawk size motor with group 12 speed.

  17.99 $

• 

  KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249

  .007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.

  4.46 $

• 

  KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265

   .007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.

  4.46 $

• 

  SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610

  SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610

  1.49 $

• 

  CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37

  PHOSPHOR BRONZE SPACERS 0,18
  the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag

  5.40 $

• 

  SLICK7 Be-Cu ARM SPACER .010" (0,254 mm), 10 psc. - SL7611

  SL7611 - .010 thick armature spacers made from hard berrilium copper. 10 psc. ber bag.

  1.49 $

• 

  SLICK7 PHENOLIC ARM SPACERS .010" (0,254 mm), 10 psc. - #SL7-108

  Phenolic arm. spacer. Phenolic spacer and bearing shield to fit armature shaft snug! O.D. is 3/16" to cover 5 mm motor bearing and is smaller than comm. so as to not interfere with motor brushes!

  3.25 $

• 

  PROSLOT X-7 PRO horizontal (for F1-32, Х-12, 16 group, Hawk group and other motors) ) motor brushes, 1 pr. - #PS-X7Horizontal

  PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7

  1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.

  5.00 $

• 

  PROSLOT X-7 PRO vertical (for ES24, ES32 and wing motors) motor brushes, 1 pr. - #PS-X7Vertical

  PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7

  1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.

  5.00 $

• 

  PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7

  PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7

  1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.

  4.50 $

• 

  PROSLOT X-7 PRO motor brushes, 6 pr. - #PS-X7

  PROSLOT X-7 PRO motor brushes, 6 pr. - #PS-X7

  6 pairs of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.

  25.00 $

• 

  TWP C-Can setup - #TWPKMB-012

  TWP C-Can setup - #TWPKMB-012

  Full setup kit for G12 (C-Can group) motor.

  68.50 $

• 

  MID AMERICA Enforcer 60,000 rpm motor - #MID609

  MID AMERICA Enforcer 60,000 rpm motor - #MID609

  18.95 $

• 

  CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB

  Cahoza C-can setup, assembled using:

  • Cahoza C-can #252, 
  • Cahoza Tornado 5 bevelled magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • Cahoza screws,
  • for .518" armatures, Koford ones are recommended, 
  • professionaly assembled, 
  • weight 10.8 grammes

  112.40 $

• 

  KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)

  ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1

  PARAMETERS:

  • Wingings: 45/29
  • Dia.: 0.459"
  • Stack: 0.235"
  • Long (by ballbearings): 0.664"
  • Advance angle: 18

  
  

  119.29 $

• 

  MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610

  MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610

  18.95 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  0.24 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  6.70 $

• 

  PROSLOT X-7 B PRO motor brushes, 50 prs. - #PS-X7B

  PROSLOT X-7 B PRO motor brushes, 1 pr. - #PS-X7B

  1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.

  195.00 $

• 

  MID AMERICA Phoenix motor double ball bearing - #MID602BB

  MID AMERICA Phoenix motor double ball bearing

  Phoenix Motor w/ Ball Bearings Details: Do not break in on a power supply

  22.95 $

• 

  CAHOZA LIGHT PROFILE ENDBELLS - #257

  New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams

  7.00 $

• 

  KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606

  KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606

  Precision matched. Recommended for wing racing. 

  13.50 $