-
TURNIGY Lead wire 18Ga (section 0,82 mm²), red, 1 m (3 ft.), insulation diameter .091" (2,32 mm)
TURNIGY Lead wire 18Ga (section 0,82 mm²), red, 1 m (3 ft.), insulation diameter .091" (2,32 mm)
-
TURNIGY Lead wire 18Ga (section 0,82 mm²), black, 1 m (3 ft.)
TURNIGY Lead wire 18Ga (section 0,82 mm²), black, 1 m (3 ft.)
-
TURNIGY LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
-
TURNIGY LEAD WIRE 20Ga (section 0,52 mm²), red, 1 m
LEAD WIRE 20Ga (section 0,52 mm²), red, 1 m
-
TURNIGY LEAD WIRE 24Ga (section 0,21 mm²), yellow, 1 m
LEAD WIRE 24Ga (section 0,21 mm²), yellow, 1 m
-
TURNIGY Lead wire 8Ga (section 8,37 mm²), red, 1 m (3 ft.), insulation diameter .24" (6,12 mm)
TURNIGY Lead wire 8Ga (section 8,37 mm²), red, 1 m (3 ft.), insulation diameter .24" (6,12 mm)
-
TURNIGY Lead wire 8Ga (section 8,37 mm²), black, 1 m (3 ft.), insulation diameter .233" (5,92 mm)
TURNIGY Lead wire 8Ga (section 8,37 mm²), black, 1 m (3 ft.), insulation diameter .233" (5,92 mm)
-
TWP 70KBB Motor - #TWP70KBB
TWP 70KBB Motor - #TWP70KBB
-
TWP C-Can setup - #TWPKMB-012
TWP C-Can setup - #TWPKMB-012
Full setup kit for G12 (C-Can group) motor.
-
TWP EDM rear axle alignment tool - #TWP521
TWP EDM rear axle alignment tool - #TWP521
New Rear axle alignment with 9 height options. Cut to erosion with CNC wire. Extremely precise with 0.005 mm tolerance. For gears between 32 teeth up to 40 teeth with holes for 3/32 shafts. The 90 mm long shaft is not included.
-
TWP Hex allen wrench .050" - #TWPCHA-002
TWP Hex allen wrench .050" - #TWPCHA-002
-
TWP Light aluminum guide nut, red - #TWPGNA-001
TWP Light aluminum guide nut, red - #TWPGNA-001
Lite weight aluminum guide nuts anodized red
-
TWP Pin body harpoon - #TWP-PIN
TWP Pin body harpoon - #TWP-PIN
Convenient tool for the body preparing!
-
TWP Standard brass guide nut - #TWPPOA-002
TWP Standard brass guide nut - #TWPPOA-002
-
UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener
Quick Overview
- solvent free two-part epoxy resin adhesive for heavy-duty requirements (300kg/cm2)
- mix proportion: 1 part binder to 1 part hardener (by volume).
- working time (open time) approx. 90 minutes
- setting time and final strength depend on temperature.
- final strength up to 30N/mm2
- time resistant, impact resistant and water resistant
Excellent epoxy for fixing magnets! -
VALIKO 0-15V, 12А, POWER SUPPLY 220V, ADJUSTABLE VOLTAGE/CURRENT
PARAMETERS
- Type: DC
- Input voltage, V: 220 (110)
- Adjustable voltage, V: 0-16
- Adjustable max current
- Weight, gr: 850
- Switch between voltage/current
- Displays current
- LED display
-
VALIKO ARMATURE S-arm (ceramic, slotted blue), WINDINGS 19/24-, DIA. 0.485", STACK 0.300", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: S-arm
- Wingings: 19/24-
- Dia.: 0.485"
- Stack: 0.300"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
VALIKO Armature Х-12 45º, 0.515" diam.
VALIKO Armature Х-12 45º, 0.515" diam.
-
VALIKO Armature Х-12 48º, 0.515" diam. (ISRA 2019 in UK oficial armature)
Avialable for pre-order on end of December and first half of Janure
-
VALIKO CUSTOM EUROSPORT ARMATURE TYPE S-arm (ceramic slotted blue). All parameters under special order
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Type: S-arm
- Wingings: various
- Dia.: 0.465"...0.472" for F32 arms
- Dia.: 0.478"...0.486" for other ES arms
- Stack: 0.236"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
VALIKO Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree and long.
Avialable for special order
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
Spacers are precisely CNC turned from brass.
- About us
- Delivery
- Payment
- Contacts
- Links
- RC (radio-controlled mode)
- Sign in
- Create an account
- My cart (0)
- DUBICK Engineering Chassis
- DUBICK Engineering Controllers
- ZHB (DUBICK Engineering) Setups
- KOLHOZA Tools, Equipments & Accessories
- ISRA F1/32 Legal 2023-2026 custom painted bodies by KOLHOZA
- Controllers & Controller Parts
-
Motors, Setups & Motor Parts
- Eurosport assembly motors
- Setups For Eurosport Motors
- Eurosport Classes Armatures
- Parts for Assembly Eurosports Classes Motors
- Falcon, Hawk & Johnson Motors
- Group-16D Motors & Parts
- Group-12 Motors & Parts
- Drag Motor Parts
- Motor (2 mm) Spacers
- Motor Springs
- Motor Brushes
- Ballbearings for Motors
- Shunt wires & Spring Insulations
- Chassis & parts
- Lead Wire (all)
- Guides, Lead Wire, Braid, Clips, Nuts & Spacers for Guides
- Axles, Bearings, Oilites & Axle spacers
- Screws
- Gears
- Wheels, Tire Donuts, Rims
-
Bodies, Stickers, Pins, Body Tape, Bulletproofing & Accesories
- Body Clips & Pins
- Materials For Body Reinforcement
- Lane Stickers
- Body Stickers
- Clear Interiors & Drivers
- ISRA Legal Clear Bodies
- Production 1/32 Clear Bodies
- Production 1/24 (G-12) Clear Bodies
- Formula 1/32 Clear Bodies
- Formula 1/24 Clear Bodies
- Eurosport 1/32 Clear Bodies
- Eurosport 1/24 Clear Bodies
- Open-12 1/24 Clear Bodies
- "Teapot" 1/24 Clear Bodies
- Retro 1/24 Clear Bodies
- 1/24 Clear Bodies
- GM-class (Truck) Clear Bodies
- G-7 Air Control Kits & Bodies
- Painted bodies & interiors
- Polycarbonate (Lexan) Sheet
- Fluids
-
Paint
- Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body
- TAMIYA spray paints for polycarbonate (lexan) & masking tape
- PARMA bottle paints for polycarbonate (lexan)
- Ralph Thorne Racing bottle paints for polycarbonate (Lexan)
- TayloRacing Paint Masks
- Parma Paint Masks
- TayloRacing Paint Masks for RC-models
- Tools & Equipments
- Accessories & Storage
- RTR Cars & Kits
- "Teapot" Models Kits & Parts
- Service
- Second hand
- RC-models
-
All brands
- 3M
- ALPHA
- Argentina Slot
- ARP (American Race Products)
- ASSOCIATED
- ATTAN
- B.S.V.
- B52
- BANDITO RACING
- BOLID
- BPA
- Brain Saunders
- BSR
- CAHOZA
- CAMEN Racing Products
- CHAMPION RACING
- Chicagoland Raceway
- CW bearings
- Delta Plastic
- DenVel electronics
- DIFALCO
- DUBICK Engineering
- Eagle Products
- EARacing
- FACTORY RACIN BODIES
- FRONT LINE (FL) SLOT
- FUZION (WEIGHING-MACHINE JEWELRY)
- General Electric
- GENERIC USA
- GO FAST
- GOFER RACING
- GOPHERT
- GRW
- H&R
- HAKKO
- Henkel
- HORKY
- HUDY
- INORS
- INTEGY
- JConcepts
- JK Products
- JS Car
- K&S Engineering
- KA PRODUCTS
- KELLY (PROSLOT)
- KLINGON
- KOBIS RACING
- KOFORD
- KOLHOZA
- KrickKrack
- KV
- LOCTITE (ГЕРМАНИЯ)
- Lucky Bob's Racing Products
- Magnehone
- MAIN {Solutions}
- MAKS
- MASHKOZA
- MG
- MID AMERICA
- MOSSETI
- MS-Slotparts
- MTT Products
- MURA
- NeAn
- Neotron
- Novak
- OLEG
- PARMA
- PAW BRAID
- PJ RACEWAY
- PK
- PRIME Racing
- PRO-TRACK Corporation
- PROSLOT
- Qbick
- RACERS EDGE
- Ralph Thorne Racing
- RED FOX
- REH
- RICHARD MACK
- S&K
- SCB
- Skinner
- SLICK 7
- Slot Fox
- Slot Racing Ukraine
- Slotlab
- Slotracingshop.com
- SONIC
- SPEED SHOP
- SPYTECH
- SRP (Slacker Racing Products)
- SRT SLOT
- Sveslot
- T/R
- TAMIYA
- TayloRacing
- TOP SECRET
- TQ WIRE
- Trinity
- TURNIGY
- TWP Products
- UHU
- VALIKO
- VITULA
- VOKI
- Weller
- WIHA
- Worm Jim Slot
- WRIGHTWAY
- YRE
- ZHB
- ЦМИТ "ИнТехно"