Replacement trigger spring for PARMA Economy and Sebring Controllers.

3 COIL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professiona

KOFORD Ultrastrong radial C-Can drag magnets

Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long

PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S

Magnets only!

B52 C-Can magnets, type 1, pair

B52 C-Can magnets, type 2, pair

CAHOZA Single endbell for C-Cans (G-12)

Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171

CAHOZA Assembled endbell for G12 C-Cans

New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes

CAHOZA Assembled endbell for G12 C-Cans +4° rotation

New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes

PROSLOT Magnet Clips for C-cans, 1 pc.

This is the clips for all 12-group (C-cans) motors.

Hardware set complete -includes hardware, oilite, spring cups and screws

Brush Hood & Heat Sink set

CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272

FX 16D/S16D Motor Setup

Proslot can for 16D motors, w/out magnets

SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.

JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S 

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

Old catalog #JK30301

JK ENDBELL FOR HAWK MOTOR W/EXTENDED BRUSH HOODS FOR SET OPTIONAL ARMATURE PROSLOR#4016 - #M3E (#M6E) 

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

Old catalog #JK30303

JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA) 

New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

Old catalog #JK30303AL

JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)

NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52

Old catalog #JKS03

MOSSETTI Motor screws, 8 pcs. - #MR1054

Package of 8 motor screws. Screw motor into the MR1004 chassis

JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53

Old catalog #JKS2016B

All PARAMETERS (from...to) under special order

(Write to us to choose what you need)

• Wingings: various
• Dia.: 0.459"...0.490"
• Stack: 0.235"...0.300"
• Long (by ballbearings): 0.634"...0.800"
• Advance angle: 15...28
• Arm.shaft: 1,5mm...2mm

(you can fill this form for made special order)

Armatures comes after rebalancing (cost 3$).