FX 16D/S16D Motor Setup

Proslot can for 16D motors, w/out magnets

SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.

JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S 

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

Old catalog #JK30301

JK ENDBELL FOR HAWK MOTOR W/EXTENDED BRUSH HOODS FOR SET OPTIONAL ARMATURE PROSLOR#4016 - #M3E (#M6E) 

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

Old catalog #JK30303

JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA) 

New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

Old catalog #JK30303AL

JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)

NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)

Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52

Old catalog #JKS03

MOSSETTI Motor screws, 8 pcs. - #MR1054

Package of 8 motor screws. Screw motor into the MR1004 chassis

JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53

Old catalog #JKS2016B

All PARAMETERS (from...to) under special order

(Write to us to choose what you need)

• Wingings: various
• Dia.: 0.459"...0.490"
• Stack: 0.235"...0.300"
• Long (by ballbearings): 0.634"...0.800"
• Advance angle: 15...28
• Arm.shaft: 1,5mm...2mm

(you can fill this form for made special order)

Armatures comes after rebalancing (cost 3$).

PARAMETERS

• Magnets quantity: 12
• Outside dia.: .580" (14,75 mm)
• Magnets height: .376" (9,6 mm)
• Magnets length: .255" (6,5 mm)
• Endbells dia.: .570" (14,5 mm)
• Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
• For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

PARAMETERS

• Magnets quantity: 16
• Outside dia.: .580" (14,75 mm)
• Magnets height: .376" (9,6 mm)
• Magnets length: .255" (6,5 mm)
• Endbells dia.: .570" (14,5 mm)
• Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
• For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

PARAMETERS

• 16 segment magnets – bevelled 15°
• Outside dia.: .577" (14,60 mm)
• Magnets height: .448" (11,4 mm)
• Magnets length: .315" (8 mm)
• Endbells dia.: .570" (14,5 mm)
• Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
• Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

PARAMETERS

• 16 segment magnets – bevelled 7°
• Outside dia.: .577" (14,60 mm)
• Magnets height: .448" (11,4 mm)
• Magnets length: .315" (8 mm)
• Endbells dia.: .570" (14,5 mm)
• Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
• Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

PARAMETERS

• 16 segment magnets – bevelled 15°
• Outside dia.: .577" (14,60 mm)
• Magnets height: .448" (11,4 mm)
• Magnets length: .315" (8 mm)
• Endbells dia.: .570" (14,5 mm)
• Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
• Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

F1/32 SETUP TOOL

PARAMETERS

• Magnets quantity: 2
• Dia. for gluing magnets: 14.7 mm
• Outside dia.: .570" 
• Magnets height: .376" 
• Magnets length: .256" 
• For armature: KOFORD ULTRA SHORT (M255EH)
• Ballbearings: GRW (1,5 mm width)

SPECIAL ORDER!

F1/32 SETUP 10 MAGNETS

PARAMETERS

• Magnets quantity: 10
• Dia. for gluing magnets: 14.7 mm
• Outside dia.: .570" 
• Magnets height: .376" 
• Magnets length: .256" 
• For armature: KOFORD ULTRA SHORT (M255EH)
• Ballbearings: GRW (1,5 mm width)

This is no actual photo! Actual photos will be added later!

SPECIAL ORDER!

F1/32 SETUP 12 MAGNETS

PARAMETERS

• Magnets quantity: 10
• Dia. for gluing magnets: 14.7 mm
• Outside dia.: .570" 
• Magnets height: .376" 
• Magnets length: .256" 
• For armature: KOFORD ULTRA SHORT (M255EH)
• Ballbearings: GRW (1,5 mm width)

This is no actual photo! Actual photos will be added later!

SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

ES-32 SETUP TOOL

PARAMETERS

• Magnets quantity: 2
• Outside dia.: .577" 
• Magnets height: .450" 
• Magnets length: .300" 
• Ballbearings: GRW (2 х 5 х 2,3 mm)

SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

ES-32 SETUP 10 MAGNETS

PARAMETERS

• Magnets quantity: 10
• Outside dia.: .577" 
• Magnets height: .450" 
• Magnets length: .300" 
• Ballbearings: GRW (2 х 5 х 2,3 mm)

SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

ES-32 SETUP 12 MAGNETS

PARAMETERS

• Magnets quantity: 12
• Outside dia.: .577" 
• Magnets height: .450" 
• Magnets length: .300" 
• Ballbearings: GRW (2 х 5 х 2,3 mm)

SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

ES-32 SETUP 14 MAGNETS

PARAMETERS

• Magnets quantity: 14
• Outside dia.: .577" 
• Magnets height: .450" 
• Magnets length: .300" 
• Ballbearings: GRW (2 х 5 х 2,3 mm)

SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS

ES-32 SETUP 16 MAGNETS

PARAMETERS

• Magnets quantity: 16
• Outside dia.: .577" 
• Magnets height: .450" 
• Magnets length: .300" 
• Ballbearings: GRW (2 х 5 х 2,3 mm)