OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020  painted in livery F1 team MCLAREN MCL35 2020 - #0141P3

• Made from: Polycarbonate (Lexan)
• For: Formula 1/24
• Thickness: .007" (0.175 mm)
• Custom painted body

Custom Painted Body Production 1/24 Lamborghini Huracan VALVOLINE

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

MID-AMERICA Replacement tire wrench tip .050", straight, dia. 3 mm

MID-AMERICA PRO billet tech block w/ 8 guide depths double sided - #MID417

Retro 1/24 McLaren M1B body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro 1/24 Lola T310 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro 1/24 Bizzarrini P538 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro Formula 1/24 Surtees TS7 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro 1/24 Citroen CV2 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .007" (0.175 mm)

Reserve axle 3/32" (2.36 mm) for TIRE TRUER KZA006 (KZA0061) & HUDY 

TAMIYA RC ESC TBLE-02S brushless - #45057

This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). Brake and neutral brake settings .

In stock

KV TIRE TRUER
3/32" and 2 mm axles included. 1/8” axle available separate. Plastic box for storage included!! (NeAn #170)
Black anodozed. Construction with two types of sandpaper and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm)

KV TIRE TRUER with
DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining. Plastic box for storage included!! (NeAn #170)
3/32" and 2 mm axles included black anodozed. Construction with two types of diamond files and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm).

Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord.  Helps reduce the burnt tip of the soldering iron. 220 volt.

B52 70K ball bearing motor - #B52-70KBB

CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158

phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs

ALP903 -RACING APRONS - full apron, High quality, bright red aprons with the Alpha Logo

TAMIYA Masking tape for curves, width 5 mm

Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves.

TAMIYA Masking tape, width 6 mm

• It even adheres well to uneven surfaces, but is easy to remove.
• Has enough elasticity to work well on curves and small edges.
• Paint does not bleed though the tape.

Comes in its own dispenser with cutter to avoid rough edges.

ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft)

It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.

MID AMERICA Eagle motor