Stand for magnets tests. Indispensable in the selection of magnets.

Link to video review: https://www.youtube.com/watch?v=BKBSmt1xII0&fbclid=IwAR1v2R-puybfh6tBgDQ9Ikzc71XbZAT54pEDwZyqWieqYR6AtgYRkHFv_UE

Magnet tester #MT v2 - a device for measuring the magnetic field strength of magnets.

Link to video review

ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft)

It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.

Speed Fx Motor springs - Double Overhead 

JK Motor springs M3 & M6 (L&R), 2 coils - #M36G

Old catalog #JK303066

Silver Metallic Lexan controller handle with hardware

Gray Metallic Lexan controller handle with hardware

The Cut Down Blade was designed for high end racing for maximum ride height adjustability. It will lower the front of chassis .030". Material is milled from top of guide around bottom of post. Use with #70235 Spacers to adjust ride height from .010" to .020" if needed.

BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435

JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635

Old catalog #JK42351

BSV Plastic rims

• For 3/32" axle; 
• Width 16 mm;
• Dia. 9.5 mm;
• Ultra light.

BSV Plastic rims

• For 3/32" axle; 
• Width 16 mm;
• Dia. 9.5 mm;
• W/offset of the hub for ES 1/32 & Production 1/32
• Ultra light.

PARAMETERS

• axle, mm.: 2,36
• width, mm: 16
• dia.,mm: 9,5
• weight per pair, gr/pair: 1,32

ON PHOTO RIMS WIDTH 20 MM!!

SONIC Replacement tire wrench tip .050", straight - #51-50TR

Fits most wrench handles. .050" tip fits Euro-Style wheels.

OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019 - #0141B

• Made from: Polycarbonate (Lexan)
• For: Formula 1/24
• Thickness: .007" (0.175 mm)
• Custom painted body (painted without stickers)

JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N

Old catalog #JK4235F

S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564

CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6

Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,

CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B

Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant

JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12

Old catalog #JK9171

CAHOZA M1 Screw & Insulator, 1 set

stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators

RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR

RAPTOR PRO FK MOTOR - DOUBLE BALL BEARING. recommended gearing 13/33 road course / 16/54 drag racing . Approx 55k rpm

KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036

• Made from: Polycarbonate (Lexan)
• For: Formula 1/32
• Thickness: .005" (0.125 mm)
• Custom painted body

KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair

Width is about 19.5 mm till 19.9 mm.

You can use this donuts in 1/24 scale if you can mounting them very precision.