-
DUBICK 0- 15V, 17A Power Supply. 110V or 220V. Weight 750 gr. Dimensions: 122 x 70 x 208 mm.
We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm. -
CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B
PARAMETERS
- 28 segmented magnets – bevelled 7°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300
ES SETUP 10 MAGNETS
ISRA 2014 World's champion in class Eurosport 1/32
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .300" (7.62 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
ZHB ES32 TOOL MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 TOOL MOTOR
Magnet height 9,6mm (.376"), length 6.5 мм (.255"), outside diameter of magnets 14,75 mm (.580"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, BigFoot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation , Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 TOOL MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 32M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 32 MAGNETS
PARAMETERS
- Magnets quantity: 32
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
KOLHOZA AXLE AND PINION CHECKER - KZA009
Deluxe Axle and pinion gear checker. Checks to make sure they are straight.
-
BSV TIRE TRUER
BSV TIRE TRUER
New tire truer with on / off button, made with two types of needle trimming in diameter, three spacers 16 mm, 20 mm, 20.7 mm, a limb for setting the diameter as on a micrometer, a reduced size and weight.
-
HUDY LATHE FOR SLOT ARMATURES - HSG
Special order!
The best lathe for grooving commutators.
You can visit the following link to find more information about this item:
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
Bulk pack of 100 3/32 ultra precision unplated axles. Esceptional tolerances and strength.
-
HUDY SLOT TIRE TRUER (1/8 + 3/32 Axles) - #103100
One of the besr tire truers. Very famous in America & in Europe
For more information you can visit the following link:
-
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
All the features of the DD270 with our traction control rheostat added. The traction rheostat reduces the amount of power available on the upper wiper bands to reduce sliding out and deslotting on the exit of turns. Extremely useful for scale cars as well as NASCAR type racing.
-
ZHB ES32 10M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 10M MOTOR
Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 10M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 12M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 12M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 14M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 14M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 16М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 16M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 18M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 18М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
- About us
- Delivery
- Payment
- Contacts
- Links
- RC (radio-controlled mode)
- Sign in
- Create an account
- My cart (0)
- DUBICK Engineering Chassis
- DUBICK Engineering Controllers
- ZHB (DUBICK Engineering) Setups
- KOLHOZA Tools, Equipments & Accessories
- ISRA F1/32 Legal 2023-2026 custom painted bodies by KOLHOZA
- Controllers & Controller Parts
-
Motors, Setups & Motor Parts
- Eurosport assembly motors
- Setups For Eurosport Motors
- Eurosport Classes Armatures
- Parts for Assembly Eurosports Classes Motors
- Falcon, Hawk & Johnson Motors
- Group-16D Motors & Parts
- Group-12 Motors & Parts
- Drag Motor Parts
- Motor (2 mm) Spacers
- Motor Springs
- Motor Brushes
- Ballbearings for Motors
- Shunt wires & Spring Insulations
- Chassis & parts
- Lead Wire (all)
- Guides, Lead Wire, Braid, Clips, Nuts & Spacers for Guides
- Axles, Bearings, Oilites & Axle spacers
- Screws
- Gears
- Wheels, Tire Donuts, Rims
-
Bodies, Stickers, Pins, Body Tape, Bulletproofing & Accesories
- Body Clips & Pins
- Materials For Body Reinforcement
- Lane Stickers
- Body Stickers
- Clear Interiors & Drivers
- ISRA Legal Clear Bodies
- Production 1/32 Clear Bodies
- Production 1/24 (G-12) Clear Bodies
- Formula 1/32 Clear Bodies
- Formula 1/24 Clear Bodies
- Eurosport 1/32 Clear Bodies
- Eurosport 1/24 Clear Bodies
- Open-12 1/24 Clear Bodies
- "Teapot" 1/24 Clear Bodies
- Retro 1/24 Clear Bodies
- 1/24 Clear Bodies
- GM-class (Truck) Clear Bodies
- G-7 Air Control Kits & Bodies
- Painted bodies & interiors
- Polycarbonate (Lexan) Sheet
- Fluids
-
Paint
- Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body
- TAMIYA spray paints for polycarbonate (lexan) & masking tape
- PARMA bottle paints for polycarbonate (lexan)
- Ralph Thorne Racing bottle paints for polycarbonate (Lexan)
- TayloRacing Paint Masks
- Parma Paint Masks
- TayloRacing Paint Masks for RC-models
- Tools & Equipments
- Accessories & Storage
- RTR Cars & Kits
- "Teapot" Models Kits & Parts
- Service
- Second hand
- RC-models
-
All brands
- 3M
- ALPHA
- Argentina Slot
- ARP (American Race Products)
- ASSOCIATED
- ATTAN
- B.S.V.
- B52
- BANDITO RACING
- BOLID
- BPA
- Brain Saunders
- BSR
- CAHOZA
- CAMEN Racing Products
- CHAMPION RACING
- Chicagoland Raceway
- CW bearings
- Delta Plastic
- DenVel electronics
- DIFALCO
- DUBICK Engineering
- Eagle Products
- EARacing
- FACTORY RACIN BODIES
- FRONT LINE (FL) SLOT
- FUZION (WEIGHING-MACHINE JEWELRY)
- General Electric
- GENERIC USA
- GO FAST
- GOFER RACING
- GOPHERT
- GRW
- H&R
- HAKKO
- Henkel
- HORKY
- HUDY
- INORS
- INTEGY
- JConcepts
- JK Products
- JS Car
- K&S Engineering
- KA PRODUCTS
- KELLY (PROSLOT)
- KLINGON
- KOBIS RACING
- KOFORD
- KOLHOZA
- KrickKrack
- KV
- LOCTITE (ГЕРМАНИЯ)
- Lucky Bob's Racing Products
- Magnehone
- MAIN {Solutions}
- MAKS
- MASHKOZA
- MG
- MID AMERICA
- MOSSETI
- MS-Slotparts
- MTT Products
- MURA
- NeAn
- Neotron
- Novak
- OLEG
- PARMA
- PAW BRAID
- PJ RACEWAY
- PK
- PRIME Racing
- PRO-TRACK Corporation
- PROSLOT
- Qbick
- RACERS EDGE
- Ralph Thorne Racing
- RED FOX
- REH
- RICHARD MACK
- S&K
- SCB
- Skinner
- SLICK 7
- Slot Fox
- Slot Racing Ukraine
- Slotlab
- Slotracingshop.com
- SONIC
- SPEED SHOP
- SPYTECH
- SRP (Slacker Racing Products)
- SRT SLOT
- Sveslot
- T/R
- TAMIYA
- TayloRacing
- TOP SECRET
- TQ WIRE
- Trinity
- TURNIGY
- TWP Products
- UHU
- VALIKO
- VITULA
- VOKI
- Weller
- WIHA
- Worm Jim Slot
- WRIGHTWAY
- YRE
- ZHB
- ЦМИТ "ИнТехно"