Motors, Setups & Motor Parts CAHOZA
-
CAHOZA Single endbell for C-Cans (G-12) - #126
CAHOZA Single endbell for C-Cans (G-12)
Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171
-
CAHOZA Assembled endbell for G12 C-Cans - #146
CAHOZA Assembled endbell for G12 C-Cans
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4
CAHOZA Assembled endbell for G12 C-Cans +4° rotation
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
-
CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A
PARAMETERS
- 16 segment magnets – bevelled 7°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA TAPPING SCREWS, for T5 driver, 1 pc. - #273-1
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
CAHOZA TAPPING SCREWS, for T5 driver, 24 pc. - #273
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver
-
CAHOZA 3 COIL MOTOR SPRINGS STEEL, pair - #255
3 COIL STEEL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15, G27 motors and G7 qualification motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs -
CAHOZA TORNADO 2 MAGNETS (C-CANS), 1 pair - #275
NEW CAHOZA TORNADO 2 MAGNETS
these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA -
CAHOZA TORNADO 2 (C-CANS) BEVELED MAGNETS, pair - #276
NEW CAHOZA TORNADO 2 BEVELLED MAGNETS
the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA -
CAHOZA TORNADO 5 MAGNETS (C-CANS), 1 pair - #277
CAHOZA TORNADO 5 MAGNETS
these popular magnets are identical as #275 (Tornado 2 magnets) but specially recharged, selected for maximum strength and matched, weight 6,58 grammes, Tornado 5 magnets are marked with yellow dot, magnets are legal for USRA and ISRA -
CAHOZA ALUMINUM HARD NICKEL BRUSH HOODS, set - #266
ALUMINIUM NICKEL PLATED BRUSH HOODS
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise -
CAHOZA 5 coil stainless steel springs, 1 pair - #161
CAHOZA 5 coil stainless steel springs, 1 pair - #161
Cahoza springs for Scale motors and G27 motors, made from stainless steel, resists up to 800F
-
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling
-
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver, packed 24 pcs per bag
-
CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268
NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise -
CAHOZA 5 COIL SPRINGS, pair - #CAH160
5 COIL SPRINGS
Cahoza springs for Scale motors and G27 motors, made from hardened steel coated with white shiny zinc, withstands 800F, high quality and accuracy -
CAHOZA TORNADO 5 (C-CANS) BEVELLED MAGNETS, pair - #278
NEW CAHOZA TORNADO 5 BEVELLED MAGNETS
the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA -
CAHOZA C-Can G12 motor - U - #231
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,1 grammes.