Motors, Setups & Motor Parts CAHOZA

• 

  CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154

  ANODISED SPRING POSTS - 3 COIL SPRINGS
  aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag

  3.50 $

• 

  CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36

  PHOSPHOR BRONZE SPACERS 0,1
  phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag

  5.20 $

• 

  CAHOZA C CAN TYPE "UL" - #252

  C-CAN TYPE UL
  Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate

  39.00 $

• 

  CAHOZA ANODIZED 5 COIL SPRING POSTS, 1 pair - #157

  ANODISED SPRING POSTS - 5 COIL SPRINGS
  aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, packaged 10 pairs per bag

  4.90 $

• 

  CAHOZA Horizontal motor brushes, pair - #351

  CAHOZA Horizontal motor brushes, pair - #351

  The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.

  4.00 $

• 

  CAHOZA Horizontal motor brushes, 10 pairs - #351

  CAHOZA Horizontal motor brushes, 10 pairs - #351

  The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.

  33.00 $

• 

  CAHOZA M1 Screw & Insulator, 1 set - #113

  CAHOZA M1 Screw & Insulator, 1 set

  stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators

  2.00 $

• 

  CAHOZA С-Can G12 motor - O - #230

  Cahoza C-can motor, assembled using:

  • "O" type C-can #250, 
  • Cahoza Tornado 2 magnets, 
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 19,2 grammes.

  100.70 $

• 

  CAHOZA C-Can G12 motor - O - bevelled - #230B

  Cahoza C-can motor, assembled using:

  • "O" type C-can #250, 
  • Cahoza Tornado 2 bevelled magnets #276,
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 18,2 grammes.

  105.70 $

• 

  CAHOZA PHENOLIC INSULATORS, 1 pc. - #158

  PHENOLIC INSULATORS
  phenolic insulators, use on all aluminium endbells

  0.24 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. 0,5 mm, 24 pcs. - #158

  CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158

  phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs

  6.70 $

• 

  CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37

  PHOSPHOR BRONZE SPACERS 0,18
  the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag

  5.40 $

• 

  CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB

  Cahoza C-can setup, assembled using:

  • Cahoza C-can #252, 
  • Cahoza Tornado 5 bevelled magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • Cahoza screws,
  • for .518" armatures, Koford ones are recommended, 
  • professionaly assembled, 
  • weight 10.8 grammes

  112.40 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  0.24 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  6.70 $

• 

  CAHOZA LIGHT PROFILE ENDBELLS - #257

  New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams

  7.00 $

• 

  CAHOZA Motor 12V - 40,000 rpm - #282

  CAHOZA Motor 12V - 40,000 rpm - #282

  new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.

  17.78 $

• 

  CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38

  PHOSPHOR BRONZE SPACERS 0,3
  the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag

  5.40 $

• 

  CAHOZA Commutator cup, 1 pc. - #150

  CAHOZA Commutator cup, 1 pc.

  Aluminium hard anodised commutator cups for G7, G27 and Scale armatures.

  For using these cups it is needed to mill the commutator to dia 4,72mm (+0,01mm), in length 1,3mm

  3.00 $

• 

  CAHOZA VERTICAL ENDBELL HARDWARE, 1 set - #170

  NEW GOLD PLATED VERTICAL HARDWARE
  NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm)

  19.00 $

• 

  CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32 - #CAH109

  CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32

  NEW aluminium gold plated vertical hardware, high precision.

  21.00 $

• 

  CAHOZA HORIZONTAL ENDBELL HARDWARE, 1 set - #171

  NEW GOLD PLATED HORIZONTAL HARDWARE
  NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm

  19.00 $

• 

  CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108

  CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32

  NEW aluminium gold plated horizontal hardware, high precision.

  21.00 $

• 

  CAHOZA 3 COIL SPRINGS STAINLESS STEEL, pair - #254

  3 COIL SPRINGS
  Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professiona

  2.50 $