Motors, Setups & Motor Parts CAHOZA

• 

  CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154

  ANODISED SPRING POSTS - 3 COIL SPRINGS
  aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag

  3.50 $

• 

  CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36

  PHOSPHOR BRONZE SPACERS 0,1
  phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag

  5.20 $

• 

  CAHOZA C CAN TYPE "UL" - #252

  C-CAN TYPE UL
  Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate

  39.00 $

• 

  CAHOZA ANODIZED 5 COIL SPRING POSTS, 1 pair - #157

  ANODISED SPRING POSTS - 5 COIL SPRINGS
  aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, packaged 10 pairs per bag

  4.90 $

• 

  CAHOZA Horizontal motor brushes, pair - #351

  CAHOZA Horizontal motor brushes, pair - #351

  The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.

  4.00 $

• 

  CAHOZA Horizontal motor brushes, 10 pairs - #351

  CAHOZA Horizontal motor brushes, 10 pairs - #351

  The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.

  33.00 $

• 

  CAHOZA M1 Screw & Insulator, 1 set - #113

  CAHOZA M1 Screw & Insulator, 1 set

  stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators

  2.00 $

• 

  CAHOZA С-Can G12 motor - O - #230

  Cahoza C-can motor, assembled using:

  • "O" type C-can #250, 
  • Cahoza Tornado 2 magnets, 
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 19,2 grammes.

  100.70 $

• 

  CAHOZA C-Can G12 motor - O - bevelled - #230B

  Cahoza C-can motor, assembled using:

  • "O" type C-can #250, 
  • Cahoza Tornado 2 bevelled magnets #276,
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 18,2 grammes.

  105.70 $

• 

  CAHOZA PHENOLIC INSULATORS, 1 pc. - #158

  PHENOLIC INSULATORS
  phenolic insulators, use on all aluminium endbells

  0.24 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. 0,5 mm, 24 pcs. - #158

  CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158

  phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs

  6.70 $

• 

  CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37

  PHOSPHOR BRONZE SPACERS 0,18
  the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag

  5.40 $

• 

  CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB

  Cahoza C-can setup, assembled using:

  • Cahoza C-can #252, 
  • Cahoza Tornado 5 bevelled magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • Cahoza screws,
  • for .518" armatures, Koford ones are recommended, 
  • professionaly assembled, 
  • weight 10.8 grammes

  112.40 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  0.24 $

• 

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159

  use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs

  6.70 $

• 

  CAHOZA LIGHT PROFILE ENDBELLS - #257

  New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams

  7.00 $

• 

  CAHOZA Motor 12V - 40,000 rpm - #282

  CAHOZA Motor 12V - 40,000 rpm - #282

  new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.

  17.78 $

• 

  CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38

  PHOSPHOR BRONZE SPACERS 0,3
  the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag

  5.40 $

• 

  CAHOZA Commutator cup, 1 pc. - #150

  CAHOZA Commutator cup, 1 pc.

  Aluminium hard anodised commutator cups for G7, G27 and Scale armatures.

  For using these cups it is needed to mill the commutator to dia 4,72mm (+0,01mm), in length 1,3mm

  3.00 $

• 

  CAHOZA VERTICAL ENDBELL HARDWARE, 1 set - #170

  NEW GOLD PLATED VERTICAL HARDWARE
  NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm)

  19.00 $

• 

  CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32 - #CAH109

  CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32

  NEW aluminium gold plated vertical hardware, high precision.

  21.00 $

• 

  CAHOZA HORIZONTAL ENDBELL HARDWARE, 1 set - #171

  NEW GOLD PLATED HORIZONTAL HARDWARE
  NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm

  19.00 $

• 

  CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108

  CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32

  NEW aluminium gold plated horizontal hardware, high precision.

  21.00 $

• 

  CAHOZA 3 COIL SPRINGS STAINLESS STEEL, pair - #254

  3 COIL SPRINGS
  Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professiona

  2.50 $

• 

  CAHOZA Single endbell for C-Cans (G-12) - #126

  CAHOZA Single endbell for C-Cans (G-12)

  Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171

  48.00 $

• 

  CAHOZA Assembled endbell for G12 C-Cans - #146

  CAHOZA Assembled endbell for G12 C-Cans

  New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes

  72.00 $

• 

  CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4

  CAHOZA Assembled endbell for G12 C-Cans +4° rotation

  New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes

  72.00 $

• 

  CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272

  CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272

  0.75 $

• 

  CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100

  PARAMETERS

  • Magnets quantity: 12
  • Outside dia.: .580" (14,75 mm)
  • Magnets height: .376" (9,6 mm)
  • Magnets length: .255" (6,5 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
  • For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  194.74 $

• 

  CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A

  PARAMETERS

  • Magnets quantity: 16
  • Outside dia.: .580" (14,75 mm)
  • Magnets height: .376" (9,6 mm)
  • Magnets length: .255" (6,5 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
  • For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  205.26 $

• 

  CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101

  PARAMETERS

  • 16 segment magnets – bevelled 15°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  205.26 $

• 

  CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A

  PARAMETERS

  • 16 segment magnets – bevelled 7°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  195.00 $

• 

  CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B

  PARAMETERS

  • 16 segment magnets – bevelled 15°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  221.05 $

• 

  CAHOZA TAPPING SCREWS, for T5 driver, 1 pc. - #273-1

  Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,

  1.00 $

• 

  CAHOZA TAPPING SCREWS, for T5 driver, 24 pc. - #273

  Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,

  18.00 $

• 

  CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1

  CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1

  use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver

  0.80 $

• 

  CAHOZA 3 COIL MOTOR SPRINGS STEEL, pair - #255

  3 COIL STEEL SPRINGS
  Cahoza springs for G12, Cobalt 12, INT15, G27 motors and G7 qualification motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs

  2.70 $

• 

  CAHOZA TORNADO 2 MAGNETS (C-CANS), 1 pair - #275

  NEW CAHOZA TORNADO 2 MAGNETS
  these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA

  10.20 $

• 

  CAHOZA TORNADO 2 (C-CANS) BEVELED MAGNETS, pair - #276

  NEW CAHOZA TORNADO 2 BEVELLED MAGNETS
  the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA

  15.60 $

• 

  CAHOZA TORNADO 5 MAGNETS (C-CANS), 1 pair - #277

  CAHOZA TORNADO 5 MAGNETS
  these popular magnets are identical as #275 (Tornado 2 magnets) but specially recharged, selected for maximum strength and matched, weight 6,58 grammes, Tornado 5 magnets are marked with yellow dot, magnets are legal for USRA and ISRA

  12.80 $

• 

  CAHOZA ALUMINUM HARD NICKEL BRUSH HOODS, set - #266

  ALUMINIUM NICKEL PLATED BRUSH HOODS
  hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise

  7.60 $

• 

  CAHOZA 5 coil stainless steel springs, 1 pair - #161

  CAHOZA 5 coil stainless steel springs, 1 pair - #161

  Cahoza springs for Scale motors and G27 motors, made from stainless steel, resists up to 800F

  4.00 $

• 

  CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266

  CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266

  hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling

  40.00 $

• 

  CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325

  CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325

  use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver, packed 24 pcs per bag

  13.20 $

• 

  CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268

  NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
  total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise

  20.00 $

• 

  CAHOZA 5 COIL SPRINGS, pair - #CAH160

  5 COIL SPRINGS
  Cahoza springs for Scale motors and G27 motors, made from hardened steel coated with white shiny zinc, withstands 800F, high quality and accuracy

  5.60 $

• 

  CAHOZA TORNADO 5 (C-CANS) BEVELLED MAGNETS, pair - #278

  NEW CAHOZA TORNADO 5 BEVELLED MAGNETS
  the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA

  21.60 $

• 

  CAHOZA C-Can G12 motor - U - #231

  Cahoza C-can motor, assembled using:

  • "U" type C-can #251, 
  • Cahoza Tornado 2 magnets, 
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 19,1 grammes.

  103.70 $

• 

  CAHOZA C-Can G12 motor - U - bevelled - #231B

  Cahoza C-can motor, assembled using:

  • "U" type C-can #251, 
  • Cahoza Tornado 2 bevelled magnets #276,
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 18,1 grammes.

  108.70 $

• 

  CAHOZA C-Can G12 motor - UL - #232

  Cahoza C-can motor, assembled using:

  • "UL" type C-can #252, 
  • Cahoza Tornado 2 magnets, 
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 19 grammes.

  108.70 $

• 

  CAHOZA C-Can G12 motor - UL - bevelled - #232B

  Cahoza C-can motor, assembled using:

  • "UL" type C-can #252, 
  • Cahoza Tornado 2 bevelled magnets #276,
  • Cahoza plastic endbell, 
  • Cahoza hardware #266, 
  • Cahoza aluminium spring cups, 
  • Cahoza tapping screws, 
  • Koford flanged oilites, 
  • Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator, 
  • Koford brushes M486, 
  • Cahoza springs #257, 
  • magnets are glued in using Cahoza single component epoxy, 
  • inside diameter of magnets is 13,45mm (.529"), 
  • weight of complete motor is only 18 grammes.

  113.70 $

• 

  CAHOZA G12 Motor type O - #235-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilites, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,2 grammes

  137.40 $

• 

  CAHOZA G12 Motor type U - #235-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilites, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,1 grammes

  140.40 $

• 

  CAHOZA G12 Motor type O - #236-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,2 grammes

  149.40 $

• 

  CAHOZA G12 Motor type U - #236-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,1 grammes

  152.40 $

• 

  CAHOZA G12 Motor type UL - #236-UL

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • best Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19 grammes

  167.40 $

• 

  CAHOZA G12 Motor type UL - bevelled - #236-ULB

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252, 
  • Cahoza Tornado 5 beveled magnets, 
  • Cahoza endbell #262, 
  • Cahoza spring cups, 
  • 2x5 precisely turned oilite in endbell, ball bearing in can, 
  • Koford brushes, 
  • 3 coil springs, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled,
  • weight 18.9 grammes

  172.40 $

• 

  CAHOZA G12 Motor type O -- GOLD - #237-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250,
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #263, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,2 grammes

  169.80 $

• 

  CAHOZA G12 Motor type U -- GOLD - #237-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251,
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #263, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19,1 grammes

  172.80 $

• 

  CAHOZA G12 Motor type UL -- GOLD - #237-UL

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252,
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #263, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19 grammes

  187.80 $

• 

  CAHOZA G12 Motor type UL -- BLUEPRINTED- #237-ULB

  Cahoza C-can motor, assembled using:

  • Cahoza UL C-can #252,
  • Cahoza Tornado 5 beveled magnets, 
  • Cahoza #263 plastic endbell with gold plated hardware, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18.9 grammes

  193.80 $

• 

  CAHOZA PROFI G12 Motor type O - #238-O

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza aluminium endbell #146, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 19 grammes

  188.80 $

• 

  CAHOZA PROFI G12 Motor type O - bevelled - #238-OB

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #250, 
  • Cahoza Tornado 5 beveled  magnets, 
  • Cahoza aluminium endbell #146 with gold plated hardware, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18.8 grammes

  203.80 $

• 

  CAHOZA PROFI G12 Motor type U - #238-U

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #251, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #146, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18,9 grammes

  191.80 $

• 

  CAHOZA PROFI G12 Motor type UL - #238-UL

  Cahoza C-can motor, assembled using:

  • new Cahoza C-can #252, 
  • Cahoza Tornado 5 magnets, 
  • Cahoza endbell #146, 
  • Cahoza spring cups, 
  • ball bearings both in can and endbell, 
  • best Koford brushes, 
  • 3 coil teflon insulated springs, 
  • silver shunt wire, 
  • Koford X12 .518" armature, 
  • Cahoza screws, 
  • professionaly assembled, absolutely the most precise and the fastest among all motors, 
  • weight 18,8 grammes

  206.80 $

• 

  CAHOZA ALUMINUM SPRING CUPS (C-CANS), pair - #270

  ALUMINIUM SPRING CUPS diameter for springs is 3,55mm (.180"), length is 2mm, springs are perfectly fastened and don't loose at all

  1.50 $

• 

  CAHOZA Setup kit - G27 Light .630" - #82

  CAHOZA Setup kit - G27 Light .630" - #82

  This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159

  80.00 $

• 

  CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A

  PARAMETERS

  • Magnets quantity: 20 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  210.53 $

• 

  CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103

  PARAMETERS

  • Magnets quantity: 24 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  221.05 $

• 

  CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A

  PARAMETERS

  • 24 segmented magnets – bevelled 15°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  231.58 $

• 

  CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B

  PARAMETERS

  • 28 segmented magnets – bevelled 7°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  242.11 $