Motors, Setups & Motor Parts CAHOZA
-
CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A
PARAMETERS
- Magnets quantity: 20 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103
PARAMETERS
- Magnets quantity: 24 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A
PARAMETERS
- 24 segmented magnets – bevelled 15°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B
PARAMETERS
- 28 segmented magnets – bevelled 7°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA 3 COIL MOTOR SPRINGS STEEL, pair - #255
3 COIL STEEL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15, G27 motors and G7 qualification motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs -
CAHOZA 3 COIL SPRINGS STAINLESS STEEL, pair - #254
3 COIL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professiona -
CAHOZA 5 COIL SPRINGS, pair - #CAH160
5 COIL SPRINGS
Cahoza springs for Scale motors and G27 motors, made from hardened steel coated with white shiny zinc, withstands 800F, high quality and accuracy -
CAHOZA 5 coil stainless steel springs, 1 pair - #161
CAHOZA 5 coil stainless steel springs, 1 pair - #161
Cahoza springs for Scale motors and G27 motors, made from stainless steel, resists up to 800F
-
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling
-
CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154
ANODISED SPRING POSTS - 3 COIL SPRINGS
aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag -
CAHOZA ALUMINUM HARD NICKEL BRUSH HOODS, set - #266
ALUMINIUM NICKEL PLATED BRUSH HOODS
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise -
CAHOZA ALUMINUM SPRING CUPS (C-CANS), pair - #270
ALUMINIUM SPRING CUPS diameter for springs is 3,55mm (.180"), length is 2mm, springs are perfectly fastened and don't loose at all
-
CAHOZA ANODIZED 5 COIL SPRING POSTS, 1 pair - #157
ANODISED SPRING POSTS - 5 COIL SPRINGS
aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, packaged 10 pairs per bag -
CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37
PHOSPHOR BRONZE SPACERS 0,18
the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag -
CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38
PHOSPHOR BRONZE SPACERS 0,3
the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag -
CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36
PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag -
CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4
CAHOZA Assembled endbell for G12 C-Cans +4° rotation
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Assembled endbell for G12 C-Cans - #146
CAHOZA Assembled endbell for G12 C-Cans
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA C CAN TYPE "UL" - #252
C-CAN TYPE UL
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate -
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
CAHOZA C-Can G12 motor - U - bevelled - #231B
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,1 grammes.
-
CAHOZA C-Can G12 motor - U - #231
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,1 grammes.