ZHB
Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov
Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.
-
ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108
ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108
-
ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106
ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106
-
ZHB PRODUCTION 1/24 MODEL KIT IN THE MAXIMUM CONFIGURATION
This is a kit of the production model 1/24 in the maximum configuration: the JK two-piece chassis, 72 pitch, motor: setup + matched magnets of the 12th group + KOFORD armature + ballbearings + multi-coil springs + washers, tubing instead of clips, lexan body.
-
ZHB PRODUCTION 1/24 MODEL KIT IN THE MINIMUM CONFIGURATION
This is a kit of the production model 1/24 in the simplest configuration: Champion chassis, 64 pitch, clips, Lexan body, Proslot X12 motor with a cheap armature (PS3000 motor, good for a beginner, costs only $ 33, then in this setup it will be possible to install any other armature.).
-
ZHB PRODUCTION 1/32 MODEL KIT IN THE MAXIMUM CONFIGURATION
This is a kit of production model 1/32 in the maximum configuration: a three-piece JK chassis, 72 pitch, motor: setup with matched magnets + S16C armature + ballbearings + multi-coil springs + washers, tubes instead of clips, lexan body.
-
ZHB PRODUCTION 1/32 MODEL KIT IN THE MINIMUM CONFIGURATION
This is a kit of production model 1/32 in the simplest configuration: chassis bronze, 64 pitch, engine without modifications, clips instead of tubes, lexan body.
-
ZHB PRODUCTION RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $59 to $185. Depending on the class and configuration.
The photos of my models are posted. New models will look more beautiful!
The average price of the model is indicated.
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 25
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB REINFORCED TAPE (w/linear reinforcement), 12 mm x 50 m - #922
A great option for the beginning racers!
-
ZHB SCISSORS MEDICAL STRAIGHT
SCISSORS MEDICAL STRAIGHT
Scissors for cutting models body and other things such as adhesive tape, lexan for strengthening, paper or cardboard. The best medical stanles steel!
-
ZHB SET OF 2 AIRBRUSHES & PARTS TO THEM
SET OF 2 AIRBRUSHES & PARTS TO THEM
Use this airbrushes with high quality paints, you can paint your bodies at home & win beauty contest:)
-
ZHB SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.
SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.
Braid/Chassis Brush. Features super strong bristles and rugged handle - makes quick work of serious braid work or the removal of stubborn chassis crud.
Brush made of stainless steel for fluffing brushes in a guide
-
ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 12 pcs.
Set of small steel files with diamond coating 12 pcs.
-
ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 10 pcs.
Set of small steel files with diamond coating 10 pcs.
-
ZHB SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE
SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE.
Very need thing to soldering iron, preventing burning out by them surrounding objects. Also viscose spoge could clean soldering iron tip from all debris
-
ZHB Set of steel files, 3 pcs.
ZHB Set of steel files, 3 pcs.
-
ZHB Spray unit per bottle for the tire traction
Spray unit per bottle for the tire traction
-
ZHB SUPER GLUE "MONOLIT"
Good super glue with a dispenser. Suitable for gluing magnets and other works.
-
ZHB TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
-
ZHB TOOL & MODEL BOX W/ORGANIZER
Very convenient and practical working case.
-
ZHB Ø1.16 mm FRONT AXLE, CARBON, (length ~ 80 mm)
Ø1.16 MM FRONT AXLE, CARBON, (length ~ 80 mm) used in Production 1/24 & Production 1/32 for made forward track with smal ribber wheels