ZHB
Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov
Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.
-
ZHB Set of steel files, 3 pcs.
ZHB Set of steel files, 3 pcs.
-
ZHB LANE STICKERS, set for race
ZHB LANE STICKERS, set for race
Lane stickers for model, from 1 to 8 lane
-
ZHB PAINT MASK FOR BODY
ZHB PAINT MASK FOR BODY
-
ZHB SUPER GLUE "MONOLIT"
Good super glue with a dispenser. Suitable for gluing magnets and other works.
-
ZHB LEAD WIRE RETAINER, 1 pc.
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
.050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
The simplest & cheap allen wrench for the beginning racers!
-
ZHB Making a imperial thread 0-80 on the guide - #112
ZHB Making a imperial thread 0-80 on the guide - #112
This is a thread for guide nuts JK & Koford
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 25
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ZHB Lead sheet thickness 1 mm, 100 х 100 mm
Lead sheet thickness 1 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
ZHB Spray unit per bottle for the tire traction
Spray unit per bottle for the tire traction
-
ZHB Lead sheet thickness 0.5 mm, 100 х 100 mm
Lead sheet thickness 0.5 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB LANE STICKERS, 10 sheets
ZHB LANE STICKERS, 10 sheets
Lane stickers for model, from 1 to 8 lane
-
ZHB Ø1.16 mm FRONT AXLE, CARBON, (length ~ 80 mm)
Ø1.16 MM FRONT AXLE, CARBON, (length ~ 80 mm) used in Production 1/24 & Production 1/32 for made forward track with smal ribber wheels
-
ZHB FRONT RUBBER TIRES, pair
FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105
ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.