ZHB
Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov
Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.
-
ZHB ES32 12M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 12 MAGNETS
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 14M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 14M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 14 MAGNETS
PARAMETERS
- Magnets quantity: 14
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 16M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 16 MAGNETS
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 16М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 18M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 18 MAGNETS
PARAMETERS
- Magnets quantity: 18
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 18М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 20M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 20 MAGNETS
PARAMETERS
- Magnets quantity: 20
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 22M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 20 MAGNETS
PARAMETERS
- Magnets quantity: 20
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 22М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 TOOL MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 TOOL SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB F 1/32 10M MOTOR
Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 CAHOZA 10M MOTOR
Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 TOOL MOTOR
Magnet height 9,6mm (.376"), length 6.5 мм (.255"), outside diameter of magnets 14,75 mm (.580"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, BigFoot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation , Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB FRONT RUBBER TIRES, pair
FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)
-
ZHB GEAR HORKY 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#218
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $2.5 (ZHB#109)
-
ZHB GEAR JK 80 PITCH, 45T, 0° angle, 2mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#209
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB GLUING SERVICE GEARS ON AXIE & MACHINING HUBS - #109
More & more sportsmen use gears glued on axle. It's connected with decrease imbalance, caused clamping of the screw and possibility use rims without offset of the hub in ES-32
Just let us know what gears and axle you need - and we will be work for you!
-
ZHB ISRA-CLASSES RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $300 to $500 and more.... Depending on the configuration. Those. It can be chassis DUBICK, HORKY or CASTRICONE, And motors: setups: ZHB, VALIKO, VOKI, CAHOZA, HORKY or Machkoza, with different armatures.
Delivery of any configurations is possible !!! The average price of the model is indicated.