ZHB
Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov
Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.
-
S&K 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.3 mm glued on 3/32" axle ProSlot - ZHB#210
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB#211
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB_#211
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
JK 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.28 mm glued on 3/32" axle ProSlot - ZHB#212
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
HORKY BIG HUB 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.35 mm glued on 3/32" axle ProSlot - ZHB#213
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB ASSEMBLY MODEL TO RACE (w/out price of parts & price of assembly of the motor ) - #102
The price of assembling the model includes the installation of the motor, together with the soldering of the pinion and the setting of the pinion-gear position, the installation of a guide, lead wires, ballbearings or oilities and tubes for pins, if necessary.
Any configuration is possible!!!!!
-
ZHB LANE STICKERS, 10 sheets
ZHB LANE STICKERS, 10 sheets
Lane stickers for model, from 1 to 8 lane
-
ZHB LANE STICKERS, 100 sheets
ZHB LANE STICKERS, 100 sheets
Lane stickers for model, from 1 to 8 lane
-
ZHB PRODUCTION 1/32 MODEL KIT IN THE MAXIMUM CONFIGURATION
This is a kit of production model 1/32 in the maximum configuration: a three-piece JK chassis, 72 pitch, motor: setup with matched magnets + S16C armature + ballbearings + multi-coil springs + washers, tubes instead of clips, lexan body.
-
ZHB ASSEMBLY OF THE MOTOR (w/out price of parts & shaft lapping) - #103
Assembly and repair of the any motors under special order
-
ZHB LAPPING ARMATURE SHAFT TO DIA. 1,5 mm - #104
ZHB LAPPING ARMATURE SHAFT TO DIA. 1,5 mm - #104
-
ZHB Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
-
S&K 80 PITCH 45T, 0° angle, 2 mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#208
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6 mm glued on 3/32" axle ProSlot - ZHB#214
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB REINFORCED TAPE (w/linear reinforcement), 12 mm x 50 m - #922
A great option for the beginning racers!
-
ZHB SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE
SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE.
Very need thing to soldering iron, preventing burning out by them surrounding objects. Also viscose spoge could clean soldering iron tip from all debris
-
ZHB Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
-
ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105
ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105
-
ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106
ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106
-
ZHB PAINTING BODY BY AIRBRUSH - #107
Painting bodies by water-based paints PARMA, under special order.
-
ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108
ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108
-
ZHB STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Quantity of bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
ZHB SET OF 2 AIRBRUSHES & PARTS TO THEM
SET OF 2 AIRBRUSHES & PARTS TO THEM
Use this airbrushes with high quality paints, you can paint your bodies at home & win beauty contest:)
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 3/32" - DB#200-3/32-2
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 2 mm - DB#200-2-2
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.