ZHB
Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov
Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.
-
ZHB Organizer universal 280 х 190 х 30 mm (11.02" x 7.48" x 1.18"), with 40 configurable compartments, grey, w/transparent cover, plastic
ZHB Organizer universal
- Material: plastic with transparent cover.
- Dimension, mm (in.): 280 х 190 х 30 mm (11.02" x 7.48" x 1.18").
- Quantity of configurable sections, pcs.: 40.
- Dimension of section, mm (in.): 33 x 33 (1.29" x 1.29").
- Conveniently customizable sections specifically for your needs!
- Secure locks prevent unwanted opening of the organizer.
-
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB FRONT RUBBER TIRES, pair
FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)
-
CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA - CAH#6-AG
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm - CAH#6-AG
CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB TOOL & MODEL BOX W/ORGANIZER
Very convenient and practical working case.
-
ZHB Metal drill, dia. 2,1 mm
ZHB Metal drill, dia. 2,1 mm
Made in USSR!
-
S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223
he hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F
Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F
This ballbearing instalation in Controller trigger
-
ZHB TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
-
ZHB DIAMOND MAGNET HONE Ø12.05 mm
ZHB DIAMOND MAGNET HONE Ø12.05 mm
-
ZHB DIAMOND MAGNET HONE Ø12.25 mm
ZHB DIAMOND MAGNET HONE Ø12.25 mm
-
ZHB DIAMOND MAGNET HONE Ø12.30 mm
ZHB DIAMOND MAGNET HONE Ø12.30 mm
-
CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K ES32 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm, glued on 2 mm KOFORD axle - ZHB#222
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA ES32 or ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#228
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ATTAN 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
