JK Products
-
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
Old catalog #JK303065
-
JK Clear body 4" Audi RSC 99, Lexan .005" (0,125 mm) - #B86X
JK Clear body 4" Audi RSC 99 - #B86X
- Made from: Polycarbonate (Lexan)
- For: 4"
- Thickness: .005" (0.125 mm)
- Clear body
Old catalog #JK7182
-
JK Tire rack - #L32
JK Tire rack - #L32
Wheel stand is for holding any kind of tires.
-
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21 -
4” Cheetah 21 Stainless Steel Chassis Kit .035” thick with screw in Falcon motor brace
Old catalog #JK25021
-
JK STIFFER BRAID, (sizes: 0,8 x 4,8 x 27,5 mm), pair - #U11
JK STIFFER BRAID, pair - #U11
Stiffer braid for guide, pair
Sizes: 0,8 x 4,8 x 27,5 mm (.0315" x .189" x 1.083")
Old catalog #JK35212
-
JK SOFT BRAID, (sizes: 0,9 x 4,85 x 32 mm), pair - #U10
JK SOFT BRAID, pair - #U10
Soft braid for guide, pair
Sizes: 0,9 x 4,85 x 32 mm (.035" x .191" x 1.26")
Old catalog #JK3521
-
JK Gear 64 pitch, 35T, 0° angle, 2 mm axle, Ø14.53 mm, w/screw- #G635m
JK Gear 64 pitch, 35T, 0° angle, 2 mm axle, Ø14.53 mm, w/screw- #G635m
Old catalog #JK42352
-
JK Gear 64 pitch, 37T, 0° angle, 2 mm axle, Ø15.35 mm, w/screw- #G637m
JK Gear 64 pitch, 37T, 0° angle, 2 mm axle, Ø15.35 mm, w/screw- #G637m
Old catalog #JK42372
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 6 pc. - #C40B-6
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
Old catalog #JK8051
-
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
-
JK Donut wizard mounting tool - #L19
JK Donut wizard mounting tool - #L19
Makes fitting of donuts easy.
Suitable for all 3/32" axle hubs / rims.
The wizard comes with 5 cones to suit most wheel sizes 8mm to 15mm
Manufactured from strong sturdy Nylon & Delrin with a hard steel 3/32" axleOld catalog #JK8075
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
-
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
Old catalog #JK55012
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43
-
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
Old catalog #JK303065
-
JK Hawk 6 Motor, *** Balanced *** - #M6
JK Hawk 6 Motor, *** Balanced *** - #M6
Old catalog #JK30306
-
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
PARAMETERS
- Inside dia., in (mm): .375 (9,52)
- Outside dia., in (mm): .850 (21,6)
-
JK Precision machined 6 hole guide nut, PRO-version, 1 pc. Use with the JK#L30 guide nut tool - #U61
JK Precision machined 6 hole guide nut, PRO-version. Use with the JK#L30 guide nut tool - #U61
-
JK Precision machined 6 hole guide nut, PRO-version, 6 pc. Use with the JK#L30 guide nut tool. - #U61-6
JK Precision machined 6 hole guide nut, PRO-version. Use with the JK#L30 guide nut tool - #U61
-
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick. - #C26T
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick.
0.039" Front 0.047" Rear
Old catalog #C43
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #U26-1
JK bushings in production chassis, pair
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574