JK Products
-
JK 3/32" (2.36 mm), .022" (0.56 mm) THICK, STEEL AXLE SPACERS, 10 pcs. - #U54-10
JK 3/32" (2.36 mm), .022" (0.56 mm) THICK, STEEL AXLE SPACERS, 10 pcs. - #U54-10
Old catalog #JK178
-
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
-
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips 30 sm (12,5") - #U68DSC
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips 30 sm (12,5") - #U68DSC
Drag Lead Wire 20AWG High Purity, High Current Copper, with Soldered On Clips 12.5"
-
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (10 ft)
-
JK Lead wire 20Ga (section 0,52 mm²), purple, 15.2 m (50 ft) - #U68-50
JK Lead wire 20Ga (section 0,52 mm²), purple, 15.2 m (50 ft) - #U68-50
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (50 ft)
-
JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S
JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S
48 pitch 9 tooth solder on pinion
Old catalog #JK4209
-
JK Clear Body 1/24 4" Chevy Nastruck, Lexan .007" (0.175 mm), with paint mask - #B63A
JK Clear Body 1/24 4" Chevy Nastruck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
Old catalog #JK71141A -
JK Clear Body 1/24 4" Super Truck-Tatra, Lexan .01" (0.25 mm), with paint mask - #B140B
JK Clear Body 1/24 4" Super Truck-Tatra
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .01" (0.25 mm)
- Clear body with paint mask
Old catalog #JK7402B
-
JK Crown gear 64-72 pitch 30 teeth, 3/32" axle, Ø13.2 mm, green, with screw - #G730L
JK Crown gear 64-72 pitch 30 teeth, 3/32" axle, Ø13.2 mm, green, with screw - #G730L
This gear used in Formula 1/32
Manufacturer declared 64 pitch, but traditionally we use pinions 72 pitch with this gears
At the same time, how I know, pinions 64 pitch also can work with this gears
Old catalog #JK5030
-
JK CONTROLLER HANDLE BOLT SET - #JK80819
JK CONTROLLER HANDLE BOLT SET - #JK80819
Set of Controller handle screws
-
JK Stainless steel motor screw, Hawk, allen head, 1.5mm, 1 pc. - #M55
JK Stainless steel motor screw, Hawk, allen head, 1.5mm, 1 pc. - #M55
Old catalog #JK3019
-
JK Motor Screw 6mm 0.050" Allan Head Black, 1 pc. - #M52
JK Motor Screw 6mm 0.050" Allan Head Black, 1 pc. - #M52
Old catalog #JKS03
-
JK Carbide spacer - hub trim tool 2mm / 3/32" - #L81A
JK Carbide spacer - hub trim tool 2mm / 3/32" - #L81A
Precision carbide tool for trimming and spacing wheel hubs on slot car axles.
-
JK Pinion gear puller T-Handle - #L17
JK Pinion gear puller T-Handle - #L17
Old catalog #JK8063
-
JK Heavy Duty Pinion Gear Puller - #L23
JK Heavy Duty Pinion Gear Puller - #L23
DELUXE GEAR PULLER has tighter pin and is harder than the previous version. Made from tool steel.
Old catalog #JK8062
-
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30301
-
-
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30303AL
-
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52
JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52
Old catalog #JKS03
-
JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53
JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53
Old catalog #JKS2016B
-
JK Front wheels for F1/32, 0.750"D 0.530"H 0.225"W 3/32"Axle (Ø18,8 mm, rimSz 13,46 mm, width 5,7 mm, axle 2,36 mm), pair - #T110F
JK Front wheels for F1/32, pair - #T110F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.225" (5,7 mm)
- Dia.: 0.750" (18,8 mm)
- Rims material: plastic
- For classes: F1/32 (JKP F 1/32 "CHEETAH 11 CHASSIS KIT" or "B.S.V KIT for assembly F1/32) & for FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK8746PF
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, dia. 4.59 mm (.180"), 1 pc. - #P610N
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, dia. 4.59 mm (.180"), 1 pc. - #P610N
This is press-on style pinion gear
Old catalog #JK440010S
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, dia. 4.59 mm (.180"), 6 ea. - #P610N-6
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, dia. 4.59 mm (.180"), 6 ea. - #P610N-6
This is press-on style pinion gear
Old catalog #JK440010S
