JK Products
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573") - #G635
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573") - #G635
Old catalog #JK42351
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573"), 1 cd. (6 ea.) - #G635-6
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573"), 1 cd. (6 ea.) - #G635-6
Old catalog #JK42351
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573"), narrow (1.51 mm .059") - #G635N
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573"), narrow (1.51 mm .059") - #G635N
Old catalog #JK4235F
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
-
JK Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
JKP Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
A close analogue of the motor FALCON 4, which had been removed from manufacturing.
In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.
Old catalog #JK303025
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
JK Carbon fiber rims for 2 mm axle, width .810" (20 mm), Ø.375" (9.5 mm), 1 pair - #R2T
JK Carbon fiber rims, 1 pair - #R2T
- For 2 mm;
- width .810" (20 mm);
- Dia. .375" (9.5 mm);
-
JK Carbon fiber rims for 2 mm axle, width .810" (20 mm), Ø.375" (9.5 mm), 1 cd. (10 pairs) - #R2T
JK Carbon fiber rims, 1 cd. (10 pairs) - #R2T
- For 2 mm;
- width .810" (20 mm);
- Dia. .375" (9.5 mm);
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573"), narrow (1.51 mm .059"), 1 cd. (6 ea.) - #G635N-6
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.55 mm (.573"), narrow (1.51 mm .059"), 1 cd. (6 ea.) - #G635N-6
Old catalog #JK4235F
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw - #G636
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw - #G636
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK42361
-
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
Precision Tolerance Allen Tip, Fits L10 and L15 handles
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw, 1 cd. (6 ea.) - #G636-6
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw, 1 cd. (6 ea.) - #G636-6
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK42361
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw, narrow - #G636N
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw, narrow - #G636N
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4236F
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw, narrow, 1 cd. (6 ea.) - #G636N-6
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.85 mm (.585"), w/screw, narrow, 1 cd. (6 ea.) - #G636N-6
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4236F
-
JK Model wheels 1/8" axle, natural rubber .765" (19.43 mm) plastic rims, pair - #T5S8L
JK Model wheels 1/8" axle, natural rubber .765" (19.43 mm) plastic rims, pair - #T5S8L
PARAMETERS
- Axle: 1/8" (3,15 mm)
- Rims dia.: .400" (10.2 mm)
- Rims material: plastic
- Tire: Natural rubber
Old catalog #JK8708PPL
-
JK CONTROLLER TRIGGER - #N9
JK CONTROLLER TRIGGER - #N9
Controller trigger, Updated
Old catalog #JK8083
-
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
Old catalog #JK80421
-
JK 3/32" x 3/16" (2.36 mm x 4.75 mm) AXLE OILITES IN PRODUCTION CHASSIS, pair - #U22
JK 3/32" x 3/16" (2.36 mm x 4.75 mm) AXLE OILITES IN PRODUCTION CHASSIS, pair - #U22
Old catalog #JK5571
-
JK 3/32" x 3/16" (2.36 mm x 4.75 mm) axle oilites in production chassis, 1 cd. ( 6 pairs) - #U22-6
JK 3/32" x 3/16" (2.36 mm x 4.75 mm) axle oilites in production chassis, 1 cd. ( 6 pairs) - #U22-6
Old catalog #JK5571
-
JK PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø10,2 mm - #R2S
JK PLASTIC RIMS #R2S
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 10,2
Old catalog #JKR021-2A
-
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw, 1 cd. (6 ea.) - #G426-6
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw, 1 cd. (6 ea.) - #G426-6
Old catalog #JK4126
-
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
48 pitch 8 tooth solder on pinion
Old catalog #JK4208