JK Products
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43
-
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
PARAMETERS
- Inside dia., in (mm): .375 (9,52)
- Outside dia., in (mm): .850 (21,6)
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #U26-1
JK bushings in production chassis, pair
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, 1 cd. (6 pairs) - #U26
JK bushings in production chassis, 1 cd. (6 pairs)
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574
-
JK 4" cheetah Aeolos center section - #C26C
JK 4" cheetah Aeolos center section - #C26C
-
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
-
JK BRASS PIN TUBING, lenght 10.8 mm, 4 psc. - #U50
JK BRASS PIN TUBING, length 10.8 mm, 4 psc. - #U50
Old catalog #JKP9171
-
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle - #G633
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle - #G633
Old catalog #JKG633
-
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G633-6
JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, 1 cd. (6 pcs.) - #G633-6
Old catalog #JKG633-6
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm - #G634
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm - #G634
Old catalog #JK42341
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, 1 cd. (6 ea.) - #G634-6
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, 1 cd. (6 ea.) - #G634-6
Old catalog #JK42341
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm (.588"), narrow (1.49 mm .059") - #G634N
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm (.588"), narrow (1.49 mm .059") - #G634N
Old catalog #JK4234F
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, narrow, 1 cd. (6 ea.) - #G634N-6
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, narrow, 1 cd. (6 ea.) - #G634N-6
Old catalog #JK4234F
-
JK PINION GEAR 48 PITCH, 7T , 2 mm bore, STEEL - #P47S
JK PINION GEAR 48 PITCH, 7T , 2 mm bore, STEEL - #P47S
48 pitch 7 tooth solder on pinion
Old catalog #JK4207
-
JK Stock car numbers, orange - #S6
JK Stock car numbers, orange - #S6
Old catalog #JK20031O
-
JK Stock car numbers, red - #S7
JK Stock car numbers, red - #S7
Old catalog #JK20031R
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
Old catalog #JK42351
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, 1 cd. (6 ea.) - #G635-6
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, 1 cd. (6 ea.) - #G635-6
Old catalog #JK42351
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm (.572"), narrow (1.51 mm .059") - #G635N
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm (.572"), narrow (1.51 mm .059") - #G635N
Old catalog #JK4235F
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
-
JK Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
JKP Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
A close analogue of the motor FALCON 4, which had been removed from manufacturing.
In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.
Old catalog #JK303025
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
