ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle, - #ATT7240

The hub is not cut width, but machined to a diameter 3 mm.

This gear for ES32 if you use offset rims in gears side or for ES24.

You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

The hub is not cut width, but machined to a diameter 3 mm.

This gear for ES32 if you use offset rims in gears side or for ES24.

You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402

CAHOZA Highly durable gear 72 pitch 40T, 0° angle, 2 mm. axle, Ø14.8 mm (Ø.584") - #5-B-2

highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

The hub is not cut width, but machined to a diameter 3 mm.

This gear for ES32 if you use offset rims in gears side or for ES24.

You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

CAHOZA Drilled Highly durable gear 72 pitch 40 teeth, 0° angle, 2 mm axle (with reduced weight), Ø14.85 mm (Ø.584") - #10

highly durable gears on small hub for 2mm axle, gears are drilled

The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, Ø15.00 mm (Ø.590") - #BSV7241332

BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7241332longled

Suitable for ES 1/24

MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, pair - #MID808A

Tiny pores, very firm, super sticky

MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, 10 pairs - #MID808A

Tiny pores, very firm, super sticky

MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, pair - #MID808B

Tiny pores, very firm, super sticky

MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, 10 pairs - #MID808B

Tiny pores, very firm, super sticky

MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair - #MID808C

Tiny pores, very firm, super sticky

MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair, 10 pairs - #MID808C

Tiny pores, very firm, super sticky

The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

The hub is cut to a width 3.5 mm & machined to a diameter 3 mm

You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172

BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, Ø15.00 mm (Ø.590") - #BSV72412

BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72412longled

Suitable for ES 1/24

S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722

JK POLYMER GEAR 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm, w/screw - #G844m

Old catalog #JK43442