S&K Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.16 mm. For gluing. - #SK3972G

VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing  - #SG790g

VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790

ATTAN Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.15 mm - #ATT7239

Clear Production 1/32  Lotus Evora GT300 MC Super GT 2017 body 

• Made from: Polycarbonate (Lexan);
• For: Production 1/32;
• Thickness: .007" (0,175 mm);
  • Clear body, with paint mask.

All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.

The chassis comes with a front wheels

JK BRASS GUIDE CLIPS, short, pair - #U16 

PRE BENT BRASS GUIDE CLIPS WITH SHORT TOP PLATE FOR SOLDERING LEAD WIRE IN THE SLOT OF THE GUIDE

The most available guide clips. Made from brass thickness 0,3 mm.

Old catalog #JK3546

JK BRASS GUIDE CLIPS, long, pair - #U15 

The most available guide clips. Made from brass thickness 0,3 mm.

Old catalog #JK3542

HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

Heat transfer compound.

Apply between brush and hood on motors to reduce comm temperatures and increase reliability, also especially effective for removable soldering iron tips.

DUBICK 3 coil motor springs, steel, pair - #DB600

3 coil springs for group 12 and higher motors. Made from hardened steel - one pair

DUBICK Panda 55,000 rpm 12V motor - #DB750

Fast and reliable FK group motor.

55 turns 28 AWG wire

Carbon brushes. Short armature shaft.

DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0

SCB braids FLYING CARS, for wing cars (G-12 - G-7), (made in Germany)

• Sizes: 4,60 x 0,70 x 30 mm
• 5 pair. 

SCB High quaility braids TOP-Q (made in Germany) (NEW!)

• Sizes: 4,0 x 0,35 mm х 26 mm,
• 5 pair. 

Good braids for all classes.

SCB braids ULTRA SOFT, (made in Germany)

• Sizes: 4,95 mm x 0,75 mm x 30 mm,
• 5 pair. 
• Ultra soft braids for all classes.

SCB High quaility braids SUPER THIN soft (made in Germany)

• Sizes: 3,9 x 0,55 mm х 30 mm,
• 5 pair. 

Good braids for all classes.

SCB High quaility braids SUPER SUPER BIG (made in Germany) (NEW!)

• Sizes: 5,2 x 0,8 mm х 25 mm,
• 5 pair. 

Good braids for all classes.

Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks

OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Clear body, with paint mask