SCB braids FLYING CARS PLUS, for wing cars (G-12 - G-7), (made in Germany)

• Sizes: 4,90 mm x 0,80 x 30 mm
• 5 pair. 

SCB braids BIG FLY, for wing cars (G-12 - G-7), (made in Germany)

• Sizes: 4,75 mm x 0,65 x 30 mm
• 5 pair. 

SCB High quality braids SUPER FINE, tin plated, 5 pairs - #SFSN01085

sizes: 4,0 x 0,25 mm х 26 mm (.157" x .010" x1.024")

Made in Germany!

SCB Braids STANDARD, tin plated, 5 pairs - # STSN01110

sizes: 4,2 x 0,35 mm х 26 mm (.165" x .014" x 1.024")

Good braids for all classes. Made in Germany

SCB High quality braids SUPER DOWN, tin plated, 5 pairs - #SDSN01095

sizes: 3,8 x 0,35 mm х 26 mm (.150" x .014" x 1.024")

Made in Germany!

SCB High quality braids SUPER SMALL, tin plated, 5 pairs - #SSSN01075

sizes: 2,8 x 0,35 mm х 26 mm (.110" x .014" x 1.024")

Made in Germany!

SCB High quaility braids GOOD RUN, 5 pair - #GRCU01095

• Sizes: 3,6 x 0,55 х 21.1 mm (.142" x .022" x .831")
• 5 pair. 

Good braids for all classes.

SCB High quaility braids GOOD CONTACT, silver-plated, (made in Germany) (NEW!)

• Sizes: 4,5 mm x 0,5 mm x 28 mm,
• 5 pair. 

Good braids for all classes.

Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks

OLEG Clear body Production 1/24 Toyota Camry NASCAR

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Clear body, with paint mask

CAHOZA Black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

EDM pinions 72 pitch 5T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

EDM pinions 72 pitch 6T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

CAHOZA Black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

EDM pinions 72 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated  - #M542

8 T Black Diamond coated pinion with boss for greater solder surface area for use with G7. Coating reduces friction and prevents solder from flowing into teeth. Use against plastic spurs only

RFBAGH - This is Red fox's new Guide flag. It is a new design in that the post is further back. This in effect lengthens the chassis resulting in better handling and better lap times (especially Retro). 

This is the same high performance guide as RFBAGH but in Graphite

1.5 mm shaft - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

CAHOZA Highly durable gear Corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.50 mm (Ø.570") - #5-BC-2

highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, tooth shape corrected so this gear has the same diameter as 39T, available in 38 teeth

BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, Ø14.32 mm (Ø.564") - #BSV72392

BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72392led

Suitable for ES 1/32

BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72392longled

Suitable for ES 1/24

S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722

ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392

MID AMERICA Guide nut - aluminum pin drive, brass, 1 cd. (6 pcs.) - #MID138X

Fits with #MID138