MOSSETTI Chassis connector J bar (2) 1.3 mm (.050") - #MR1049

New J Bar chassis clip. Works with Mossetti, Mid America and JK chassis.

DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010 

ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.

ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

This is a kit of production model 1/32 in the simplest configuration: chassis bronze, 64 pitch, engine without modifications, clips instead of tubes, lexan body.

It is delivered under the order

Perhaps a slight change in price, depending on the terms of delivery.

It is delivered to order in the latest available version at the time of order.

Formula 1/24 AGS-Cosworth 1986

• Made from: Polycarbonate (Lexan)
• For: Formula 1/24
• Thickness: .01" (0.25mm)

Formula 1/24 Body AGS-Cosworth 1986

• Made from: Polyvinyl chloride (PVC)
• For: Formula 1/24
• Thickness: .015" (0.4 mm)

JK Wrench for 1.5mm allen motor screws - #L12

Old catalog #JK80422

ARP PINION 64 PITCH, 9T , 0° ANGLE,  2 mm bore, stainless steel

64 pitch stainless steel 9 tooth pinion gear heat treated to 36-38 hardness

ARP PINION 64 PITCH, 9T , 0° ANGLE,  2 mm bore, stainless steel

64 pitch stainless steel 9 tooth pinion gear heat treated to 36-38 hardness

It is delivered to order in the latest available version at the time of order.

Formula 1/32 RED BULL Body 

• Made from: Polycarbonate (Lexan)
• For: Formula 1/32
• Thickness: .007" (0.175 mm)

BSV .050” (4-40) Allen wrench w/guide nut tool

Allen wrench, from one side tip for .050" (4-40) rims screws, on other side guide nut tool for JK nuts or others

SLICK7 3/32" (2.36 mm), .016" (0.4 mm) thick, polymer axle spacers, 10 pcs. - #SL7-111

Check to make sure your axles are perfectly straight

Silver heat transfer compound.

Apply between brush and hood on motors to reduce comm temperatures and increase reliability for all classes of racing. Silver will settle over time, mix before using.

Lead sheet thickness 0.5 mm, 100 х 100 mm can help you to configure your chassis. 

*To fix, you must use glue or double adhesive tape!

Lead sheet thickness 1 mm, 100 х 100 mm can help you to configure your chassis. 

*To fix, you must use glue or double adhesive tape!

Clear Formula 1/24 Renault RE 30 1982 body

• Made from: Polycarbonate (Lexan)
• For: Formula 1/24
• Thickness: .01" (0.25mm)
• Clear body