KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607

Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.

TUBE FOR STORAGE ARMATURE, Ø13,5 mm

KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R

Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust. 

Premium 3/32 axles with precision ground gear and wheel flats, now with perfect balance with M472 Koford tires and the new Koford gears. 

Silver solder with flux core. 5% silver for 82% higher shear strength compared to regular silver solder.

TUBE FOR STORAGE ARMATURE, Ø15,5 mm

BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing  - #BSV7239332longled

Suitable for ES 1/24

CAHOZA Highly durable gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.15 mm (Ø.557") - #5-B-2

highly durable polymer gears 72 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant

Clear Production 1/32  Lotus Evora GT300 MC Super GT 2017 body 

• Made from: Polycarbonate (Lexan);
• For: Production 1/32;
• Thickness: .007" (0,175 mm);
  • Clear body, with paint mask.

DUBICK Egineering Power supply with the ability to accurately adjust the amperage (0-12 A) and voltage (0-15 V). Input voltage 220V/110V. Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)

The range of voltage regulating from 0 to 15 Volts and amperage from 0 to 12 Amperes. 

The adjustment accuracy is up to 0.01 both voltage and amperage. 

Ability to work from 110 and 220 volts. 

USB Charger. 

Wires are attached. 

Weight 850 Grams. 

Dimensions: 4.803" x 2.756" x 8.189" (122 x 70 x 208 mm)

MID-AMERICA Brass lead wire clips, 1 pair - #MID141

MID-AMERICA Brass lead wire clips, 1 cd. ( 12 pairs) - #MID141

HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5

DUBICK 3 coil motor springs, steel, pair - #600

3 coil springs for group 12 and higher motors. Made from hardened steel - one pair

DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0

SCB braids FLYING CARS PLUS, for wing cars (G-12 - G-7), (made in Germany)

• Sizes: 4,90 mm x 0,80 x 30 mm
• 5 pair. 

SCB braids BIG FLY, for wing cars (G-12 - G-7), (made in Germany)

• Sizes: 4,75 mm x 0,65 x 30 mm
• 5 pair. 

SCB High quality braids SUPER FINE, tin plated, 5 pairs - #SFSN01085

sizes: 4,0 x 0,25 mm х 26 mm (.157" x .010" x1.024")

Made in Germany!

SCB Braids STANDARD, tin plated, 5 pairs - # STSN01110

sizes: 4,2 x 0,35 mm х 26 mm (.165" x .014" x 1.024")

Good braids for all classes. Made in Germany

SCB High quality braids SUPER DOWN, tin plated, 5 pairs - #SDSN01095

sizes: 3,8 x 0,35 mm х 26 mm (.150" x .014" x 1.024")

Made in Germany!

SCB High quality braids SUPER SMALL, tin plated, 5 pairs - #SSSN01075

sizes: 2,8 x 0,35 mm х 26 mm (.110" x .014" x 1.024")

Made in Germany!

SCB High quaility braids GOOD RUN, 5 pair - #GRCU01095

• Sizes: 3,6 x 0,55 х 21.1 mm (.142" x .022" x .831")
• 5 pair. 

Good braids for all classes.

SCB High quaility braids GOOD CONTACT, silver-plated, (made in Germany) (NEW!)

• Sizes: 4,5 mm x 0,5 mm x 28 mm,
• 5 pair. 

Good braids for all classes.

Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks