We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm.

Replacement controller handle for all PARMA Controllers. Direct fit for Economy and Sebring controllers. Can be used for Turbo, Plus and Turbo Qualifier with modifications (top must be cut as original handle).

Very good lead wire for all classes!

The same, as #S7-217 & #S7-212, but this one sold from big reel. It is cut according to the meter from the reel.

PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620

KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12

Fit for S&K tire truer.

CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339

Upgraded version of long cut down guide (#336) for integral guide tongue chassis, lenght 26.8 mm, straight keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used

TAMIYA Masking tape, width 10 mm

• It even adheres well to uneven surfaces, but is easy to remove.
• Has enough elasticity to work well on curves and small edges.
• Paint does not bleed though the tape.

Comes in its own dispenser with cutter to avoid rough edges.

TAMIYA Masking tape for curves, width 12 mm

Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves.

TAMIYA Masking tape refill, width 18 mm - #87035

TAMIYA Masking tape, width 40 mm - #87063

Tamiya Masking Tape is thin, very strong adhesive tape for modelling use.

MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138

Perfect for #MID138B, #MID138R

2 х 5 х 2,3 mm flanged shielded  ballbearings, 7 balls, pair 

High quality, german flanged ballbearings

KV upgrade kit for tire truer with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining

New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams

ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382

BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing  - #BSV7239332led

Suitable for ES 1/32

Custom Painted Body Production 1/24 Lamborghini Huracan BWT

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

Custom Painted Body Production 1/24 Lamborghini Huracan PETRONAS

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

Custom Painted Body Production 1/24 Lamborghini Huracan DHL

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

Custom Painted Body Production 1/24 Lamborghini Huracan MONSTER ENERGY

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

Custom Painted Body Production 1/24 Lamborghini Huracan MARTINI

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

Custom Painted Body Production 1/24 Lamborghini Huracan REPSOL

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

Custom Painted Body Production 1/24 Lamborghini Huracan SANTANDER

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

Custom Painted Body Retro Formula 1/24 Tyrrell 001 1970 (painted without stickers)

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .010" (0.254 mm)
• Custom Painted Body (painted without stickers)