Custom Painted Body Production 1/24 Lamborghini Huracan VALVOLINE

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Custom Painted Body (painted without stickers)

MID-AMERICA Replacement tire wrench tip .050", straight, dia. 3 mm

DUBICK Tweezers stainless steel, non-magnetic - #715

Perfect for work with small parts! 

Retro 1/24 McLaren M1B body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro 1/24 Lola T310 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro 1/24 Bizzarrini P538 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro Formula 1/24 Surtees TS7 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .010" (0.254 mm)

Retro 1/24 Citroen CV2 body 

• Made from: Polycarbonate (Lexan)
• For: Retro 1/24
• Thickness: .007" (0.175 mm)

Special order!

These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.

Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 110 volt 

KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536

SPECIAL ORDER!

KV TIRE TRUER
3/32" and 2 mm axles included. 1/8” axle available separate. Plastic box for storage included!! (NeAn #170)
Black anodozed. Construction with two types of sandpaper and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm)

KV TIRE TRUER with
DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining. Plastic box for storage included!! (NeAn #170)
3/32" and 2 mm axles included black anodozed. Construction with two types of diamond files and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm).

PARMA Phenolic heat resistant tech block recessed for guide & tires - #MID414

CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158

phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs

Koford Engineering apron with 3 sections

TAMIYA Masking tape for curves, width 5 mm

Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves.

TAMIYA Masking tape, width 6 mm

• It even adheres well to uneven surfaces, but is easy to remove.
• Has enough elasticity to work well on curves and small edges.
• Paint does not bleed though the tape.

Comes in its own dispenser with cutter to avoid rough edges.

TQ Lead wire 20Ga (section 0,52 mm²), black 1 m (3 ft) - #TQ2031

266 strand bare copper conductor with thin silicone insulation. 1.75mm OD available in Black only. Not the lightest leadwire available but has approx. 75% more copper in the conductor to deliver more current and less loss

 Wheel well cutting tool - cuts rear wheel well at 20mm

DUBICK TECH BLOCK WITH MAGNETS - #205

Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.

RALPH THORNE Flux Brush, 1 pc.

1 disposable flux brush with adjustable length handles.

CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #335

long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, very precise, high quality material used

BPA Clear Body Eurosport 1/24 BMW LMR

• Made from: Polycarbonate (Lexan)
• For: Eurosport 1/24
• Thickness: .007" (0.175 mm)
• Clear body