• 

  DUBICK Controller chip 78 Ohm for DUBICK Electronic controller - #722-78

  DUBICK Controller chip 78 Ohm for DUBICK Electronic controller 

  12.00 $

• 

  KOLHOZA EUROSPORT 1/32 AUDI R15 TDI BODY, LEXAN, thickness .005" (0.125 mm) - #656-LT

  EUROSPORT 1/32 Audi R15 TDI Body 

  ISRA LEGAL 2015-2020

  • Made from: Polycarbonate (Lexan)
  • For: Eurosport 1/32
  • Thickness: .005" (0.125 mm)

  5.62 $

• 

  DUBICK Controller chip 95 Ohm for DUBICK Electronic controller - #722-95

  DUBICK Controller chip 95 Ohm for DUBICK Electronic controller

  12.00 $

• 

  QBICK Tech block, full analogue of the Dubick engineering tech block

  QBICK Tech block, full analogue of the Dubick engineering tech block

  One side is finally polished to ideal plane, another side is ready for the soldering.

  This tech block is a full analogue of the Dubick engineering tech block!

  50.00 $

• 

  Tech Tool for Production 24

  8.99 $

• 

  DUBICK Anodized spring cups / 5 coil springs - #717

  DUBICK Anodized spring cups / 5 coil springs

  4.00 $

• 

  DUBICK Electronic controller Pro version

  DUBICK Electronic controller Pro version

  • -suitable for all classes of models;
  • -more functional than S&K, Kobis or DiFalco controllers;
  • -antibrake, antibrake correction;
  • -wire CHOKE;

  -traction control;

  • -one or two transistors in use;
  • -adjust the sharpness of the transistor;
  • -15 chips;
  • -built-in voltmeter;
  • -gold-plated contact block;
  • -full protection against incorrect switching on.

  1 400.00 $

• 

  DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs. - #708

  DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs.

  1.90 $

• 

  BP PRODUCTS Gear drilling tool for drilling 2 mm holes in 3/32" axle gears

  BP PRODUCTS Gear drilling tool for drilling 2 mm holes in 3/32" axle gears

  70.00 $

• 

  CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36

  PHOSPHOR BRONZE SPACERS 0,1
  phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag

  5.20 $

• 

  PARMA SUPER BRAID CONDITIONER - #665А

  Use our specially formulated braid conditioner to keep braid soft and pliable, great for breaking in and less resistance

  3.99 $

• 

  DUBICK Pinion gear 48 pitch, 6T, 2 mm bore, brass (This is solder style pinion gear) - #501-6

  48 pitch Straight stainless steel 6 tooth pinion gears

  IN STOCK!

  
  

  2.80 $

• 

  DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407

  DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407

  Brass pin tubing for chassis 10.8 mm -4/10 of an inch

  5.50 $

• 

  JK BRASS PIN TUBING, lenght 10.8 mm, 4 psc. - #U50

  JK BRASS PIN TUBING, length 10.8 mm, 4 psc. - #U50

  Old catalog #JKP9171

  3.50 $

• 

  DenVel electonics Stand for magnets tests - #MT1

  Stand for magnets tests. Indispensable in the selection of magnets.

  Link to video review: https://www.youtube.com/watch?v=BKBSmt1xII0&fbclid=IwAR1v2R-puybfh6tBgDQ9Ikzc71XbZAT54pEDwZyqWieqYR6AtgYRkHFv_UE

  90.00 $

• 

  DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")

  DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")

  65.00 $

• 

  DUBICK Plastic box 104 х 175 х 22 mm (4.09" x 6.89" x 0.87") w/15 configurable sections - #215

  DUBICK Plastic box 104 х 175 х 22 mm (4.09" x 6.89" x 0.87") w/15 configurable sections - #215

  • Material: plastic with transparent cover.
  • Dimension, mm (in.): 104 х 175 х 22 mm (4.09" x 6.89" x 0.87").
  • Quantity of configurable sections, pcs.: 15.
  • Plastic parts box like the DE214 but bigger

  6.50 $

• 

  WRIGHT WAY Flux brush, 4 pc. - #WWFB4

  WRIGHT WAY Flux brush, 4 pc.

  0.90 $

• 

  OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121F

  Custom Painted Body Production 1/24 Audi RS5 DTM

  • Made from: Polycarbonate (Lexan)
  • For: Production 1/24
  • Thickness: .007" (0.175 mm)
  • Custom Painted Body

  18.00 $

• 

  OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121G

  Custom Painted Body Production 1/24 Audi RS5 DTM

  • Made from: Polycarbonate (Lexan)
  • For: Production 1/24
  • Thickness: .007" (0.175 mm)
  • Custom Painted Body

  18.00 $

• 

  PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #PS-680-32

  PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #680-32

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  6.50 $

• 

  JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø13.95 mm (.549") - #G633

  JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø13.95 mm (.549") - #G633

  Old catalog #JKG633
  

  5.49 $

• 

  JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø13.95 mm (.549"), 1 cd. (6 pcs.) - #G633-6

  JK Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø13.95 mm (.549"), 1 cd. (6 pcs.) - #G633-6

  Old catalog #JKG633-6
  

  29.93 $

• 

  PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #PS-680-33

  PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #670-36

  The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub

  6.50 $

You viewed: