Motors, Setups & Motor Parts
-
CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36
PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag -
PROSLOT Replacement motor brushes for EURO MK1 motor, 1 cd. (6 pr.) - #PS-4014
PROSLOT Replacement motor brushes for EURO MK1 motor, 1 cd. (6 pr.) - #PS-4014
-
PROSLOT Production motor brushes, 1 pair - #PS-623
PROSLOT Production motor brushes, 1 pair - #PS-623
-
PROSLOT Production motor brushes, 1 cd. (6 pr.) - #PS-623
PROSLOT Production motor brushes, 1 cd. (6 pr.) - #PS-623
-
PROSLOT MOTOR BRUSHES SpeedFX, pair - #2014
Pair of Speed FX motor brushes.
Basic brushes, which are equipped with new motors PROSLOT 16D
-
PROSLOT MOTOR BRUSHES SpeedFX, 6 pairs - #2014
Pack of 6 pairs of Speed FX motor brushes.
Basic brushes, which are equipped with new motors PROSLOT 16D
-
MID AMERICA Power plus premium motor brushes, 1 pair - #MID650
MID AMERICA Power plus premium motor brushes, 1 pair - #MID650
-
PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906
SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.
-
CAHOZA C CAN TYPE "UL" - #252
C-CAN TYPE UL
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate -
PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912
MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long
Selected tool magnets for C-cans (group 12 motors)
-
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
-
CAHOZA ANODIZED 5 COIL SPRING POSTS, 1 pair - #157
ANODISED SPRING POSTS - 5 COIL SPRINGS
aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, packaged 10 pairs per bag -
PARMA 500 SERIES MOTOR SPRINGS - #500D
Replacement springs for all 16D motors
-
MID AMERICA Condor motor 16D size - #MID603
MID AMERICA Condor motor 16D size - #MID603
16D can with a nice fast arm.
Slightly faster than a S16D arm
-
PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006
FX X12 Replacement Balanced Armature (commutator trued)
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.
-
PROSLOT VIP C-CAN SETUP KIT W/O MAGNETS - #PS-749VIP
C-can Setup kit (without magnets). Prepared set of C-CAN X-12, w/out magnets. The can looks like the photo.
-
PROSLOT Replacement Springs 90 degrees, 3 coils, pair - #PS-4013-90
PROSLOT Replacement Springs 90 degrees, 3 coils, pair - #PS-4013-90
-
PROSLOT Replacement Springs 90 degrees, 3 coils, 1 cd. (6 pair) - #PS-4013-90-6
PROSLOT Replacement Springs 90 degrees, 3 coils, 1 cd. (6 pair) - #PS-4013-90-6
-
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
-
PROSLOT X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS - #PS-749SRS
X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS
-
KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647
JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.
-
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs