Motors, Setups & Motor Parts
-
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)
-
PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001
PROSLOT SpeedFX S16D BALANCED MOTOR - #PS-2001
Universal motor with a wide range of uses and wide possibilities of upgrades.
It is used, as in the simplest models of "Teapot", and in models of trucks. Depending on the ratio and the installed optional armature, the Production class 1/24 is also suitable.
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
TWP 70KBB Motor - #TWP70KBB
TWP 70KBB Motor - #TWP70KBB
-
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.
-
DUBICK 3 coil motor springs, steel, pair - #DB600
DUBICK 3 coil motor springs, steel, pair - #DB600
3 coil springs for group 12 and higher motors. Made from hardened steel - one pair
-
DUBICK Panda 55,000 rpm 12V motor - #DB750
DUBICK Panda 55,000 rpm 12V motor - #DB750
Fast and reliable FK group motor.
55 turns 28 AWG wire
Carbon brushes. Short armature shaft.
-
CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38
PHOSPHOR BRONZE SPACERS 0,3
the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag -
SLICL7 ARMATURE (2 MM) BRONZE SPACER .030" (0.8 MM) THICK, 6 pcs. - #S7-283
ARMATURE SPACER , .030 THICK, MACHINED (NEW THICKNESS)
-
CHAMPION LIGHT BRUSH SPRINGS, 2 coils, red, pair - CHA526L
Champion Red Brush Springs - Light - Lightweight high performance "red" for all motors
Universal springs, which suitable for all types of motors
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/28
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 20
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/30
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 28
-
KOFORD 760" LONG, C12 ARMATURE (for set in Eurosport motors) - #М467-12C
race arm, 32° .490 C12 arm .760 long, 2006 Nat’s winner Pro
Alternative to expensive Eurosport class armatures. Suitable for all setups, except the latest micro-motors for F 1/32.
-
PK Eurosport armature PK, windings 30/50, dia. .465", stack .230", .600" long, 26 degree
PK F32 Eurosport armature
Fit for Cahoza, VOKI, ZHB setups.
-
PROSLOT Euro MK1 Motor - 26.000+ rpm - #PS-4000
PROSLOT Euro MK1 Motor - 26.000+ rpm
155/gm-cm, 280mA, standard with 45 degree springs. Designed for 1/32 and 1/24 ScaleHome, Club and Commercial Racing. CW or CCW rotation
-
GRW Premium Precision Ballbearing 2 х 5 х 1,5 mm, unshielded - #SS682
GRW - is a German manufacturer of premium class.
Premium Precision Ballbearing 2 х 5 х 1,5 mm, unshielded - #SS682
-
GRW Premium Precision Balbearing 2 х 5 х 2.3 mm, shielded - #SS682-ZZ
GRW - is a German manufacturer of premium class.
Premium Precision Balbearing 2 х 5 х 2.3 mm, shielded - #SS682-ZZ
-
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607
-
GRW Premium Precision Balbearing 2 х 5 х 2.3 mm, flanged, shielded - #SSF682-ZZ
GRW - is a German manufacturer of premium class.
Premium Precision Balbearing 2 х 5 х 2.3 mm, flanged, shielded - #SSF682-ZZ
-
SLICK7 TEFLON ENDBELL SCREW INSULATORS, 6 pcs. - #SL428
Teflon Insulator spacers for Aluminium Endbells, .050 ID x .110 O.D. x .015 Thick
-
PK Eurosport armature PK, windings 19/25, dia. .485", stack .300", 25 degree
PK Eurosport armature
PARAMETERS:
- Wingings: 19/25
- Dia.: 0.485"
- Stack: 0.300"
- 325 degree
-
PK Eurosport armature PK, windings 20/25, dia. .485", stack .300", 25 degree
PK Eurosport armature
PARAMETERS:
- Wingings: 20/25
- Dia.: 0.485"
- Stack: 0.300"
- 325 degree
-
PROSLOT EUROSPORT ARMATURES, PARAMETERS UNDER SPECIAL ORDER
All PARAMETERS under special order
(Write to us to choose what you need)
- Wingings
- Dia.
- Stack
- Long (by ballbearings)
- Advance angle
- Arm.shaft: 1,5mm
(you can fill this form for made special order)
Armatures comes after rebalancing (cost 3$).