Motors, Setups & Motor Parts
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.
-
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #S7-96
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
-
KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647
JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.
-
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs
-
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
-
JK Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
JKP Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
A close analogue of the motor FALCON 4, which had been removed from manufacturing.
In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.
Old catalog #JK303025
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013
Speed Fx Motor springs - Double Overhead
-
CAHOZA Horizontal motor brushes, pair - #351
CAHOZA Horizontal motor brushes, pair - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
CAHOZA Horizontal motor brushes, 10 pairs - #351
CAHOZA Horizontal motor brushes, 10 pairs - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
CAHOZA M1 Screw & Insulator, 1 set - #113
CAHOZA M1 Screw & Insulator, 1 set
stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators
-
PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38
Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42
Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45
Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
CAHOZA С-Can G12 motor - O - #230
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,2 grammes.
-
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
CAHOZA PHENOLIC INSULATORS, 1 pc. - #158
PHENOLIC INSULATORS
phenolic insulators, use on all aluminium endbells -
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. 0,5 mm, 24 pcs. - #158
CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158
phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs
-
MID AMERICA Mockingbird motor - #MID604
MID AMERICA Mockingbird motor
-
MID-AMERICA DIAMOND HEAD SET UP KIT W/ BUSHINGS & MAGNETS - #MAR630
Diamond Head C can set up Kit w/ Bushings C Can Set Up Very High Quality Set up kit with Magnets and brush springs
-
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249
.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.
-
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265
.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.
-
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610