Motors, Setups & Motor Parts

• 

  JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)

  JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA) 
  

  New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  Old catalog #JK30303AL

  22.94 $

• 

  JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)

  JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)

  NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  8.99 $

• 

  KOFORD ARMATURE M199SAW CUSTOM EURO ARMS, - M199SAW Custom Euro arms

  All PARAMETERS (from...to) under special order

  (Write to us to choose what you need)

  • Wingings: various
  • Dia.: 0.459"...0.490"
  • Stack: 0.235"...0.300"
  • Long (by ballbearings): 0.634"...0.800"
  • Advance angle: 15...28
  • Arm.shaft: 1,5mm...2mm

  
  (you can fill this form for made special order)

  Armatures comes after rebalancing (cost 3$).

  127.00 $

• 

  CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100

  PARAMETERS

  • Magnets quantity: 12
  • Outside dia.: .580" (14,75 mm)
  • Magnets height: .376" (9,6 mm)
  • Magnets length: .255" (6,5 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
  • For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  194.74 $

• 

  CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A

  PARAMETERS

  • Magnets quantity: 16
  • Outside dia.: .580" (14,75 mm)
  • Magnets height: .376" (9,6 mm)
  • Magnets length: .255" (6,5 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
  • For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  205.26 $

• 

  CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101

  PARAMETERS

  • 16 segment magnets – bevelled 15°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  205.26 $

• 

  CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A

  PARAMETERS

  • 16 segment magnets – bevelled 7°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  195.00 $

• 

  CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B

  PARAMETERS

  • 16 segment magnets – bevelled 15°
  • Outside dia.: .577" (14,60 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis

  221.05 $

• ZHB ES24 TOOL MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers. 

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  263.16 $

• ZHB ES24 10M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  300.00 $

• ZHB F 1/32 TOOL MOTOR

  Magnet height 9,6mm (.376"), length 6.5 мм (.255"), outside diameter of magnets 14,75 mm (.580"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, BigFoot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation , Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  263.16 $

• ZHB ES24 12M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  305.26 $

• ZHB ES24 14M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  310.53 $

• ZHB F 1/32 10M MOTOR

  Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  300.00 $

• ZHB ES24 16M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  315.79 $

• ZHB ES24 18M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  321.05 $

• ZHB ES24 CAHOZA 20М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  342.11 $

• ZHB ES24 22M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  326.32 $

• ZHB ES24 24M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  336.84 $

• ZHB F 1/32 CAHOZA 10M MOTOR

  Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  342.11 $

• ZHB ES24 CAHOZA 24М MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  368.42 $

• ZHB ES32 TOOL MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  263.16 $

• ZHB ES32 10M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  300.00 $

• ZHB ES32 12M MOTOR

  Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.

  Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)

  305.26 $