Motors, Setups & Motor Parts

• 

  VALIKO ARMATURE S-arm (ceramic, slotted blue), WINDINGS 19/24-, DIA. 0.485", STACK 0.300", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm

  PARAMETERS:

  • Type: S-arm
  • Wingings: 19/24-
  • Dia.: 0.485"
  • Stack: 0.300"
  • Long (by ballbearings): 0.660"
  • Advance angle: 28
  • Arm.shaft: 1,5mm

  115.79 $

• 

  VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm

  VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm

  115.79 $

• 

  VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm

  VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm

  115.79 $

• 

  VALIKO CUSTOM EUROSPORT ARMATURE TYPE S-arm (ceramic slotted blue). All parameters under special order

  All PARAMETERS (from...to) under special order

  (Write to us to choose what you need)

  • Type: S-arm
  • • Wingings: various
    • Dia.: 0.465"...0.472" for F32 arms
    • Dia.: 0.478"...0.486" for other ES arms
    • Stack: 0.236"...0.300"
    • Long (by ballbearings): 0.634"...0.800"
    • Advance angle: 15...28
    • Arm.shaft: 1,5mm...2mm

  
  (you can fill this form for made special order)

  
  

  Armatures comes after rebalancing (cost 3$).

  115.79 $

• 

  VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1

  VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1

  Spacers are precisely CNC turned from brass.

  0.53 $

• 

  VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20

  VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20

  Spacers are precisely CNC turned from brass.

  8.42 $

• 

  CAHOZA Commutator cup, 1 pc. - #150

  CAHOZA Commutator cup, 1 pc.

  Aluminium hard anodised commutator cups for G7, G27 and Scale armatures.

  For using these cups it is needed to mill the commutator to dia 4,72mm (+0,01mm), in length 1,3mm

  3.00 $

• 

  CAHOZA VERTICAL ENDBELL HARDWARE, 1 set - #170

  NEW GOLD PLATED VERTICAL HARDWARE
  NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm)

  19.00 $

• 

  CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32 - #CAH109

  CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32

  NEW aluminium gold plated vertical hardware, high precision.

  21.00 $

• 

  KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-250

  ES SETUP 10 MAGNETS

  PARAMETERS

  • Magnets quantity: 10
  • Outside dia.: .620" (15.75 mm)
  • Magnets height: .430" (10.9 mm)
  • Magnets length: .250" (6.35 mm)
  • For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)

  248.89 $

• 

  KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300

  ES SETUP 10 MAGNETS

  ISRA 2014 World's champion in class Eurosport 1/32

  PARAMETERS

  • Magnets quantity: 10
  • Outside dia.: .620" (15.75 mm)
  • Magnets height: .430" (10.9 mm)
  • Magnets length: .300" (7.62 mm)
  • For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)

  253.23 $

• 

  KOFORD ES SETUP TOOL, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-ES-250

  ES SETUP TOOL

  PARAMETERS

  • Magnets quantity: 2
  • Outside dia.: .620" (15.75 mm)
  • Magnets height: .430" (10.9 mm)
  • Magnets length: .250" (6.35 mm)
  • For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)

  199.27 $

• 

  DUBUCK Precision Ballbearing 2 х 5 х 2.5 mm, unshielded - #DB605

  Ballbearing 2 х 5 х 2.5 mm, unflanged - #DB605

  5.00 $

• 

  PARMA 16D CAN BUSHINGS (2x6 mm) - #500J

  Made from powder bronze. Replacement for all 16D motor cans

  0.99 $

• 

  PROSLOT Euro MK1 Motor - 37.000+ rpm - #PS-4001

  PROSLOT Euro MK1 Motor - 37.000+ rpm

  160/gm-cm, 300mA, standard with 60 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing. CW or CCW rotation

  20.95 $

• 

  PROSLOT ENDBELL KIT FOR PROSLOT C-CANS, W/BRUSH HOODS - #PS643

  Complete Endbell Kit - includes endbell, hardware, spring cups, oilite and screws

  17.00 $

• 

  PROSLOT Euro MK1 Motor - 47.000+ rpm - #PS-4002

  PROSLOT Euro MK1 Motor - 47.000+ rpm

  160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing

  20.95 $

• 

  CAHOZA HORIZONTAL ENDBELL HARDWARE, 1 set - #171

  NEW GOLD PLATED HORIZONTAL HARDWARE
  NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm

  19.00 $

• 

  CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108

  CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32

  NEW aluminium gold plated horizontal hardware, high precision.

  21.00 $

• 

  KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 4 pcs. - #M256-4

  0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws

  3.12 $

• 

  DUBICK Precision Ballbearing 2 х 6 х 2,3 mm, unflanged - #DB606

  DUBICK Precision Ballbearing 2 х 6 х 2,3 mm, unflanged - #DB606

  3.00 $

• 

  PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B

  PROSLOT Euro MK1 motor blue printed sealed

  Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing

  61.00 $

• 

  PROSLOT Euro MK 1 Motor with American made X12 armature 40* - #PS-4002-12

  Euro MK 1 Motor with American made X12 armature 40* CW Rotation

  61.00 $

• 

  PROSLOT C-Can assembled endbell (w/copper hardware) - #PS-618

  PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS-618

  24.95 $