KOFORD
-
KOFORD BRASS RETAINERS FOR .063 TUBING 24 pcs. - #M536
Machined brass retainers (eyelets) for .063 tubing 24 pieces in an easy open box
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
8 tooth 64 pitch stainless pinion with boss to help keep solder out of teeth.
-
KOFORD THREAD RETAINING COMPOUND, tube -M300
Thread retaining compound used to keep can screws from vibrating loose on aluminum endbells. Prevents endbell damage by allowing can screws to be tightened until only snug
-
KOFORD EPOXY HIGH TEMP MAGNET ADHESIVE, one-component - #M345
High temperature epoxy magnet adhesive. Single component advanced structural adhesive especially formulated for gluing slot car magnets. Has superior impact strength and high temperature capabilities compared to commonly available magnet adhesives. Oven cure.
-
KOFORD SILVER HEAT TRANSFER COMPAUND - M329
Silver heat transfer compound.
Apply between brush and hood on motors to reduce comm temperatures and increase reliability for all classes of racing. Silver will settle over time, mix before using.
-
KOFORD HIGH TEMP ENDBELL EPOXY, one-component - #M385
High temp. endbell epoxy. Optimized for use in endbells. Oven cure
-
KOFORD Ø3/32" (2.36 mm) PREMIUM HOLLOW AXLE, length 53 mm - #KOF339
Premium Qualifying 3/32 .066 hole hollow axle made from tubing. For those who wish to grind their own flats.
-
KOFORD HARD PREMIUM BRUSHES BIGFOOT, VERTICAL, pair - #M244A
Hard premium brushes for vertical brush hoods, open and group classes
Prepared for installation in vertical brush hoods brushes.
-
KOFORD Soft magnet cleaning putty - #M724S
Soft magnet cleaning putty.
Soft cleaner for removing chips from magnets. May be kneaded and reused many time. Because material starts out soft it will absorb more chips without becoming too hard.
-
KOFORD MEDIUM TIRE TRACTION, bottle - #M320
Medium tire traction. Ideal for G15 C12 and lower class cars which require a lighter glue
-
KOFORD HEAVY TIRE TRACTION, bottle - #M319
Heavy tire traction. The choice of the Pro's.
-
KOFORD LIGHT TIRE TRACTION, bottle - #M384
Light tire traction
-
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD Ø4/40" SCREW IN RIMS & GEARS, PERFORATED, 12 pcs. - #621
Gold billet machined hollow set screws (not rolled like standard set screws). Increased tightening cycles over standard set screws. (bag of 12)
-
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249
.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265
.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.
-
KOFORD S.B.F. II Horizontal motor brushes, pair - #M486
Traditional brushes for motor, they have a little more density, compared to brushes PROSLOR - #PS-901 accordingly more are erased, but the collector wears out more.
In ISRA classes motors it is customary to establish BIGFOOT brush on "+" and a brush manufactured by PROSLOT on "-". Thus, it is possible to achieve the most uniform wear of the brushes. Regardless of this, as practice shows, the plus brush should be changed 2 times more often.
-
KOFORD BRUSH RADIUS TOOL, Ø5.2 mm - #M270
Brush radius tool for fast break in. The essential tool for maximum motor performance. Now hardened for long life and with improved knurl
-
KOFORD .050" INSERT IN ALLEN WRENCH, straight, dia. 2 mm - #M163
Improved reduced diameter insert for the above wrench, also fits all standard handles
-
KOFORD Drag glue regular, bottle - #M452
KOFORD Drag glue regular - #M452
Drag Glue. Blow away the competition! Tests show our glue results in better ET’s than existing technology!
-
KOFORD LOW TEMP SOLDER W/FLUX CORE - #M444
Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks
-
KOFORD HIGH TEMPERATURE SOLDER W/FLUX CORE - #M618
High temperature silver solder. Melting point 598F. Ideal for soldering on pinions for G7 motors to prevent spinning.