KOFORD
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/30
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 28
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/28
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 20
-
KOFORD .003" (0,07MM) AXLE SPACING TOOL 3/32 - #M572
003 Side play adjusting tool for 3/32 axles. Allows you to quickly get the perfect side play every time
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
KOFORD .005" (0.13 MM) TEFLON GUIDE WASHER, 6 pcs. - #M322
.005 Teflon® guide washer. Use to reduce friction between guide and chassis. Where guide height adjustments are required, use #M321. Packaged 6 per bag.
-
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265
.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.
-
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249
.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.
-
KOFORD .010" (0.254 MM) PHOS BRONZE GUIDE WASHER, 6 pcs. - #M321
.010 thick Phosphorous Bronze guide washer. Use to adjust guide height Will not deflect like stacked Teflon® washers. Packaged 6 per bag.
-
KOFORD .050" GEAR AND WHEEL ALLEN WRENCH, black, anodized - #M162
Precision gear and wheel wrench with reduced diameter for clearance with plastic gears
-
KOFORD .050" INSERT IN ALLEN WRENCH, straight, dia. 2 mm - #M163
Improved reduced diameter insert for the above wrench, also fits all standard handles
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 4 pcs. - #M256-4
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 24 pcs. - #M256
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws. Easy open box of 24.
-
KOFORD 3/32 AXLES Flatted Ø3/32" (2.36 mm), (length 53 mm) - #M156F
Premium 3/32 axles with precision ground gear and wheel flats, now with perfect balance with M472 Koford tires and the new Koford gears.
-
KOFORD 3/32" (2.36 MM) .010 (0.26 MM) THICK PHOS BRONZE AXLE SPACER, 12 psc. - #M296
.010 thick 3/32 Phos Bronze axle spacers. Very hard but will not stick to magnets. 12 per bag.
-
KOFORD 3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc. - #M704
3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc.
-
KOFORD 3/32" (2.36 MM) .024" (0.61 MM) THICK STEEL AXLE SPACER, 12 psc. - #M624
.024" X 3/32" stainless axle spacers. 12 per bag.
-
KOFORD 3/32" (2.36 mm) .060" (1,52 mm) thick machined aluminum axle spacer, 6 psc. - #M733
KOFORD 3/32" (2.36 mm) .060" (1,52 mm) thick machined aluminum axle spacer, 6 psc. - #M733
-
KOFORD 3/32" (2.36 MM) .100" (2.54 MM) LONG, ALUMINUM SPACERS, 6 psc. - #M625
.100 long machined aluminum spacer for 3/32 axles. 6 per bag.
-
KOFORD 3/32" (2.36 mm) .160" (4.06 mm) long, aluminum spacers, 6 psc. - #M734
.160 long machined aluminum spacer for 3/32 axles. 6 per bag.
-
KOFORD 3/32" (2.36 MM), .175" (4.45 MM) LONG, PLASTIC AXLE SPACER, 1 pc. - #M449
Plastic axle spacer for narrow motor box cars with 3/32 axles. A snug fit on the axle so that it doesn't fall off
-
KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546
KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546
-
KOFORD 3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair - #M546-1
3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair