KOFORD
-
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644
Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.
-
KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40
G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.
-
KOFORD ENBELL FOR SETUP KOFORD M652 UNDER ARMATURE W/RING - #M287L
ENBELL FOR SETUP KOFORD #M652 UNDER ARMATURE W/RING - #M287L
-
KOFORD SOFT FISH RUBBER DONUTS inside Ø 9.5 mm, outside Ø24.5 mm, about 26 mm width, pair - M678
KOFORD REAR WHEEL TIRES, pair - M678
Enough for two 1\32 wheels if carefull cut donuts on half)
-
KOFORD Pinion 64 pitch, 12T, 0° angle, 2 mm bore, precision & hardened - #M323-12
KOFORD Pinion 64 pitch, 12T, 0° angle, 2 mm bore, precision & hardened - #M323-12
Precision plated and hardened pinions, available in 8,9,10,11,12,13, and 14 tooth. Plating eliminates rust and produces a stronger solder joint for less chance of spinning. Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only.
-
KOFORD Pinion 64 pitch, 13T, 0° angle, 2 mm bore, precision & hardened - #M323-13
KOFORD Pinion 64 pitch, 13T, 0° angle, 2 mm bore, precision & hardened - #M323-13
Precision plated and hardened pinions, available in 8,9,10,11,12,13, and 14 tooth. Plating eliminates rust and produces a stronger solder joint for less chance of spinning. Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only.
-
KOFORD Pinion 64 pitch, 14T, 0° angle, 2 mm bore, precision & hardened - #M323-14
KOFORD Pinion 64 pitch, 14T, 0° angle, 2 mm bore, precision & hardened - #M323-14
Precision plated and hardened pinions, available in 8,9,10,11,12,13, and 14 tooth. Plating eliminates rust and produces a stronger solder joint for less chance of spinning. Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only.
-
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
Pinned 9T 3° angled Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.
-
KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S
KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S
Black Diamond coated hardened 11 tooth straight pinion with boss. Coating reduces friction and prevents solder flowing into teeth.
-
KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11
KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11
Black Diamond coated hardened 11 tooth 5 degree angled pinion with boss. Coating reduces friction and prevents solder flowing into teeth.
-
KOFORD .010" (0.254 MM) PHOS BRONZE GUIDE WASHER, 6 pcs. - #M321
.010 thick Phosphorous Bronze guide washer. Use to adjust guide height Will not deflect like stacked Teflon® washers. Packaged 6 per bag.
-
KOFORD Teflon® spring insulation, 30 cm - #M267
KOFORD Teflon® spring insulation, 30 cm - #M267
Teflon® spring insulation, perfect fit on springs
-
KOFORD BRASS RETAINERS FOR .063 TUBING 1 pc. - #M536
Machined brass retainers (eyelets) for .063 tubing
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
KOFORD Premium glass strapping tape - #M464
KOFORD Premium glass strapping tape - #M464
Highest strength glass strapping tape for body pin reinforcement.
-
KOFORD BRASS RETAINERS FOR .063 TUBING 24 pcs. - #M536
Machined brass retainers (eyelets) for .063 tubing 24 pieces in an easy open box
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
KOFORD Lane stickers, 6 sheets - #M557
KOFORD Lane stickers, 6 sheets - #M557
Big bright stickely lane stickers. 6 sheets of 8 colors per package.
-
KOFORD Alligator clips, 1 set - #M176
KOFORD Alligator clips, 1 set - #M176
Solid copper alligator clips
-
KOFORD Controller boots, 1 set - #M748
KOFORD Controller boots, 1 set - #M748
Red, White and Black allligator boots
