KOFORD
-
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
SPECIAL ORDER!
-
KOFORD Flux brush - #M424
At last a flux brush which is the correct size for slot car racing and will hold up to the attack of acid flux.
-
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249
.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.
-
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265
.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.
-
KOFORD 408 BRAID 12 PAIRS in a plastic box - #M660
12 pairs of 408 strand braid in a easy open plastic box
-
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
8 tooth 64 pitch stainless pinion with boss to help keep solder out of teeth.
-
KOFORD .005" (0.13 MM) TEFLON GUIDE WASHER, 6 pcs. - #M322
.005 Teflon® guide washer. Use to reduce friction between guide and chassis. Where guide height adjustments are required, use #M321. Packaged 6 per bag.
-
KOFORD 3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc. - #M704
3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc.
-
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
Prepare your motor fast & precise.
-
KOFORD LIGHT TIRE TRACTION, bottle - #M384
Light tire traction
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD 3/32" (2.36 MM) .010 (0.26 MM) THICK PHOS BRONZE AXLE SPACER, 12 psc. - #M296
.010 thick 3/32 Phos Bronze axle spacers. Very hard but will not stick to magnets. 12 per bag.
-
KOFORD Drag glue regular, bottle - #M452
KOFORD Drag glue regular - #M452
Drag Glue. Blow away the competition! Tests show our glue results in better ET’s than existing technology!
-
KOFORD EPOXY HIGH TEMP MAGNET ADHESIVE, one-component - #M345
High temperature epoxy magnet adhesive. Single component advanced structural adhesive especially formulated for gluing slot car magnets. Has superior impact strength and high temperature capabilities compared to commonly available magnet adhesives. Oven cure.
-
KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606
KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606
Precision matched. Recommended for wing racing.
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 4 psc. - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
KOFORD Ø4/40" SCREW IN RIMS & GEARS, PERFORATED, 12 pcs. - #621
Gold billet machined hollow set screws (not rolled like standard set screws). Increased tightening cycles over standard set screws. (bag of 12)
-
KOFORD ARMATURE TUBE, Ø13.5 mm - M602
KOFORD ARMATURE TUBE, Ø13.5 mm - M602
-
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust. They feature extra tight diameter tolerances to prevent play between axle and bearings as well as exceptional straightness. They are made from a special tool steel with twice the strength of drill blank axles.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
Bulk pack of 100 3/32 ultra precision unplated axles. Esceptional tolerances and strength.
-
KOFORD SILVER (5%) SOLDER W/FLUX CORE- #M333
Silver solder with flux core. 5% silver for 82% higher shear strength compared to regular silver solder.
-
KOFORD ARMATURE TUBE, Ø13.5 mm, 6 pcs.
KOFORD ARMATURE TUBE, Ø13.5 mm, 6 pcs.