KOFORD
-
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD HIGH TEMPERATURE SOLDER W/FLUX CORE - #M618
High temperature silver solder. Melting point 598F. Ideal for soldering on pinions for G7 motors to prevent spinning.
-
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair - #M235
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair
-
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
Ultra Premium shielded rear axle ball bearings, ribbon retainer and ultra precise internal geometry for smooth rotation and the lowest drag. Highest quality steel and ribbon retainer for long life. Made in Switzerland.
-
KOFORD LEAD WIRE RETAINER, 1 pc. - #M324
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
KOFORD SILVER HEAT TRANSFER COMPAUND - M329
Silver heat transfer compound.
Apply between brush and hood on motors to reduce comm temperatures and increase reliability for all classes of racing. Silver will settle over time, mix before using.
-
KOFORD SHORT BIG HEAD BODY PINS (STRAIGHT), 48 psc. in tube - #M545
Short length big head pro body pins. No trimming required! Won't stick past the end of the body mount tube and hang up lead wire or stick marshalls. Ligher weight then long pins. Custom made just for us, the best on the market. 48 pins per package.
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-250
ES SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300
ES SETUP 10 MAGNETS
ISRA 2014 World's champion in class Eurosport 1/32
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .300" (7.62 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD ES SETUP TOOL, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-ES-250
ES SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD Soft magnet cleaning putty - #M724S
Soft magnet cleaning putty.
Soft cleaner for removing chips from magnets. May be kneaded and reused many time. Because material starts out soft it will absorb more chips without becoming too hard.
-
KOFORD .003" (0,07MM) AXLE SPACING TOOL 3/32 - #M572
003 Side play adjusting tool for 3/32 axles. Allows you to quickly get the perfect side play every time
-
KOFORD SIDE PLAY ADJUSTING TOOL (0.13 MM) - #M388
Side play adjusting tool for the rear axle of non ball bearing cars. Allows you to quickly get the perfect side play every time.
-
KOFORD Graphite guide, standart profile, no threads, 1 pc - #M699
KOFORD Graphite guide, standart profile, no threads, 1 pc - #M699
-
KOFORD Graphite guide, standart profile, no threads, 1 cd. (6 pcs.) - #M699
KOFORD Graphite guide, standart profile, no threads, 1 cd. (6 pcs.) - #M699
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, w/clips, 1 pr. - #M430
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, w/clips, 1 pr. - #M430
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner. With clips
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.) - #M431
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.)
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Three foot length of our 413 strand light weight ultraflex lead wire
-
KOFORD RECTANGULAR MOTOR BOX WITH FOAM, plastic, 1 pc. - #603
Motor Boxes with 2 piece yellow foam
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 4 pcs. - #M256-4
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws
-
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD DIAMOND WHEEL FOR MAGNETS .500"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
KOFORD DIAMOND WHEEL FOR MAGNETS .538"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
KOFORD 3/32 AXLES Flatted Ø3/32" (2.36 mm), (length 53 mm) - #M156F
Premium 3/32 axles with precision ground gear and wheel flats, now with perfect balance with M472 Koford tires and the new Koford gears.
-
KOFORD .050" GEAR AND WHEEL ALLEN WRENCH, black, anodized - #M162
Precision gear and wheel wrench with reduced diameter for clearance with plastic gears