KOFORD
-
KOFORD T-SHIRT, SIZE- M - #204-M
KOFORD T-SHIRT, SIZE- M
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- L - #204-L
KOFORD T-SHIRT, SIZE- L
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XL - #204-XL
KOFORD T-SHIRT, SIZE- XL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XXL - #M204-XXL
KOFORD T-SHIRT, SIZE- XXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XXXL - #M204-XXXL
KOFORD T-SHIRT, SIZE- XXXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD THREAD RETAINING COMPOUND, tube -M300
Thread retaining compound used to keep can screws from vibrating loose on aluminum endbells. Prevents endbell damage by allowing can screws to be tightened until only snug
-
KOFORD Ultrastrong radial C-Can drag magnets- #M592
KOFORD Ultrastrong radial C-Can drag magnets
Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long
-
KOFORD ARMATURE M199SAW CUSTOM EURO ARMS, - M199SAW Custom Euro arms
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Wingings: various
- Dia.: 0.459"...0.490"
- Stack: 0.235"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
KOFORD BRASS GUIDE NUT 9.5 MM SOCKET - #M615
Brass guide nut. Adds one gram nose weight
-
KOFORD DRILLED ALUM ANODIZED GUIDE NUT, 9,5 MM SOCKET - #M302
Lightweight drilled, anodized aluminum guide nut.
-
KOFORD 3/32" (2.36 MM) .024" (0.61 MM) THICK STEEL AXLE SPACER, 12 psc. - #M624
.024" X 3/32" stainless axle spacers. 12 per bag.
-
KOFORD Premium axle without flats Ø3/32" (2.36 mm), (length 53 mm), 1 cd. (6 pcs.) - #M762
KOFORD Premium axle without flats Ø3/32" (2.36 mm), (length 53 mm), 1 cd. (6 pcs.) - #M762
3/32 premium axles without flats, same as M156F but without flats for those who wish to grind their own flats.
-
KOFORD Premium axle without flats Ø3/32" (2.36 mm), (length 53 mm) - #M762
KOFORD Premium axle without flats Ø3/32" (2.36 mm), (length 53 mm) - #M762
3/32 premium axles without flats, same as M156F but without flats for those who wish to grind their own flats.
-
KOFORD Ø3/32" (2.36 mm) Narrow flatted ultra-precision axle - #M744
KOFORD Ø3/32" (2.36 mm) Narrow flatted ultra-precision axle - #M744
Precisely ground flats to eliminate spinning and provide perfect dynamic balance. Special steel for twice the strength of drill blank axles and better rust resistance then other unplated axles
-
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle - #M697F
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle - #M697F
EDM drilled and wire cut flatted .060 hollow race axle. Lighter and 50% stronger the M445F
-
KOFORD Controller wiper button, 1 pc. - #M738
Controller wiper button, 1 pc.
Wiper button for all Koford controllers
-
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair - #M235
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair
-
KOFORD Axle ballbearing 3/32" x 3/16" (2.36 mm x 4.76 mm), shielded, pair - #M633
KOFORD Axle ballbearing 3/32" x 3/16" (2.36 mm x 4.76 mm), shielded, pair - #M633
Premium, high-precision ball bearings engineered for professional slot car racing.
-
KOFORD Ø1/8" (3.15 mm) drill blank axle, length 2.677" (68 mm) - #M418
KOFORD Ø1/8" (3.15 mm) drill blank axle, length 2.677" (68 mm) - #M418
1/8 axles with the famous Koford precision fit. The same straightness and size control which racers have long enjoyed with 3/32 axles now comes to 1/8 axles
-
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
Ultra Premium shielded rear axle ball bearings, ribbon retainer and ultra precise internal geometry for smooth rotation and the lowest drag. Highest quality steel and ribbon retainer for long life. Made in Switzerland.
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
KOFORD Pinion 64 pitch, 11T, 0° angle, 2 mm bore, precision & hardened - #M323-11
KOFORD Pinion 64 pitch, 11T, 0° angle, 2 mm bore, precision & hardened - #M323-11
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38
Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
